Audio-Technica entry class VM cartridge. It has a bright and light sound that matches popular systems in general. Recommended for getting started. (FUJISAWA KOSHI)
Maintenance information: 2024.7.2 operation confirmed
Accessories: No accessories
Main specifications: Playback frequency band 20 to 20,000 Hz, output voltage 5.0 mV, standard needle pressure 1.5 g, dead weight 3.5 g
Rosencrantz entry model insulator set of 4 Unplated brass, this is a special gem with both vertical and horizontal energy directions. The exterior has small scratches, dullness, etc. and a feeling of use (Tamai Jun)
Accessories: none
Main specifications: diameter 35mm height 21mm
Single sale military high reliability tube CV4004/12AX7/ECC83 equivalent tube box plate measurement value 42 (rejected value 32) with white box, there is printing friction ※The measured value indicates the gM value measured with the test machine TV-7 (Kojima Yosuke)
Accessories: white box
This model uses PCOCC material for the internal wiring of the AT33 series, a standard model of domestic MC cartridges along with the DL-103, and has acquired even greater transparency. The wide range and clear contours are also the appeal of the 33 series. The exterior has a feeling of use such as dullness and dirt on the body (Sasaki Shota)
Maintenance information: 2024.7.1 sound output confirmed
Accessories: needle cover
Main specifications: MC type playback frequency band 15 to 50,000 Hz output 0.4 mV needle pressure 1.2 to 1.8 g impedance 17 ohms dead weight 6.8 g
Maintained! YAMAHA 7-channel vari-controlled FM tuner. It was a luxury model at the time, and is thin yet has an atmospheric structure. This is an impressive car with a fearless design with a black face. You can enjoy clear sound quality typical of Yamaha. There are dullness and small scratches on the exterior (Mizusaki Ryo)
Maintenance information: 2024.7.1 Maintained (The high frequency circuit section has been comprehensively adjusted. The offset of the digital display has been adjusted and corrected, and MPX has been adjusted. (The certification lamp has been replaced with an LED)
Main specifications: FM dedicated tuner frequency characteristics 30Hz to 15kHz W435 x H70 x D349 mm 7.0 kg
RCA cable, 1.0 m, is a standard BELDEN line cable that clearly outlines the sound while clearly outlining the sound while having a firm thickness in the mid to low range. The degree is good, but the characters are blurry and unreadable. (FUJISAWA KOSHI)
Maintenance information: 2024.7.1 continuity confirmed
Accessories: No accessories
※It is cheap because it is heavily cracked on one side. The unique 5-layer structure, which uses a newly developed honeycomb core containing cast iron powder, strongly prevents the speaker from making floor noise. It is a clear black type with cool and hard sound quality, using a hard melanin board as the surface material. In addition to cracks on the exterior, there is a feeling of use such as line damage (Mizusaki Ryo)
Accessories: none
Main specifications: W470 x H41 x D400 mm Top surface: W450 x D350 mm 6 kg/1 sheet
Single sale military high reliability tube CV4004/12AX7/ECC83 equivalent tube box plate measurement value 40 (rejected value 32) There is printing friction ※The measured values indicate gM values measured with the testing machine TV-7 (Kojima Yosuke)
Accessories: none
Single sale military high reliability tube CV4004/12AX7/ECC83 equivalent tube box plate measurement value 40 (rejected value 32) *Measured values indicate gM values measured with the testing machine TV-7 (Kojima Yosuke)
Accessories: none
Pure Class A stereo power amplifier. Precise sound particles overlap over and over to create a thick sound. It is an amplifier where you can catch a glimpse of the essence of Accuphase, which is close to the core of music by thoroughly refining physical characteristics. In addition to the sense of power and the power of the bass, I still feel attractive in the mid-high range, which has contours and stretches. There are scratches, dirt, and front threads on the top plate (Daiki Goto)
Maintenance information: 2024.6.30 Operation confirmed
Accessories: instruction manual, power cable
Main specifications: A grade 60W+60W (8 ohms) dimensions W465 x H238 x D545 mm weight 45.1 kg
※6 month warranty It is a parallel imported model and is probably not sold domestically. It boasts high efficiency (output sound pressure level 94 dB) in the 13 cm class, and lets you hear sharp sounds. There are no noticeable scratches on the exterior. Serial 106067519091742, 106067519091742 (Fujisawa Yukishi)
Maintenance information: 2024.6.30 Operation confirmed
Accessories: instruction manual, original box, saran net, rubber feet
Main specifications: 2-way bass reflex system frequency characteristics 62 Hz to 24 kHz output sound pressure level 94 dB speaker maximum output 340 W W178 x H318 x D208 mm 4.67 kg
Mono specification. MC boost transformer using American UTC transformer. The cut is sharp and the sound is slightly tight, and it seems to be a good spice. Jazz is sharp, and classical music clearly expresses fine contours. The paint is peeling off and rust and floating can be seen. (FUJISAWA KOSHI)
Maintenance information: 2024.6.30 Operation confirmed
Accessories: No accessories
Main specifications: MC transformer boost ratio 1:35 input 100Ω output 100kΩ W110 × H110 × D65 mm
A granite board with an all-mirror finish. It's the perfect size and thickness for a small speaker. (FUJISAWA KOSHI)
Accessories: No accessories
Main specifications: W200×H32×D200mm
※Sunburn marks are conspicuous on the top plate, so it is inexpensive. Comes with a remote control! PIONEER's turntable CD player has a reputation. It has a smooth sound and reproduces particularly high notes smoothly and beautifully. The CD format uses “Legato Link Conversion Technology,” which estimates and generates frequency components of 20 kHz or higher that have been cut in the CD format. There are sunburn marks on the top plate. Serial SKNN0022250JP (Satoshi Yonejima)
Maintenance information: 2024.6.30 Operation confirmed
Accessories: remote control, power cable
Main specifications: DAC mode with sampling frequency switching (32/44.1/48kHz) W420 x H128 x D374 mm weight 10.0 kg
FOSTEX's 16cm full range unit pair is recommended for those thinking about making their own with a backload etc. with the goal of a clear, sharp tone and three-dimensional sound field space. The appearance is good with little feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.6.29 sound output confirmed
Accessories: instruction manual, original box, mounting screws, gasket
Main specifications: 16cm double cone full range allowable input 65W 8Ω 94dB W166 × H166 × D77.6mm 1.6 kg
Set of 6 multi-use carbon pipes The extra-thick CFRP pipe with a thickness of 3 mm quickly treats unnecessary vibrations. It can also be used with the company's STB-MSX stabilizer. The appearance is good with little feeling of use (Kobayashi Hitoshi)
Accessories: original box
Main specifications: outer diameter: 20 mm, inner diameter: 14 mm, wall thickness: 3 mm, height: 17 mm (pipe shape), load capacity: 500 kg/piece
The price has been drastically reduced. 2024/6/30 sales price 138,000 yen Maintained! Sun Valley KT88 push pull As it looks, it is similar to the Macintosh MC275, and the sound has a bright, vibrant, and supple impression. The sharpness, which is more responsive than a normal transistor amplifier, is attractive. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.6.30 maintenance completed (vacuum tube, partial wire replacement cathode, B-line solder and crack correction vacuum tube pin cleaning, wiring restyling, capacitor position correction, bias check, output sound approx. 40W confirmation, interior and exterior cleaning)
Accessories: dedicated power cord
Main specifications: 6550 push-pull compatible impedance 8, 4 ohm rated output 40W+40W, vacuum tube 6550, EL84 x 4 (SOVTEK), 12AX7EH x 2 (electro-harmonix), 4Ω/8 ohm compatible W430 x D270 x H200 mm 18 kg
Speaker cable 1.9 m pair ends untreated. A new conductor made by mixing high-purity 6NCu with high-performance pure copper HIFC, tin-coated OFC, and high-purity oxygen-free copper. The dynamic sound that cannot be imagined with a thin exterior is attractive (Murakoshi Yoichi)
Maintenance information: 2024.6.27 continuity confirmed
Accessories: none
BELLDREAM digital needle pressure gauge This needle pressure gauge has a wide range of measurement locations and is easy to use. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.6.22 Operation confirmed
Accessories: none
Main specifications: Measurement range minimum 0.1 g to maximum 350 g
Comes with a stroboscope! Turntable seat made of butyl rubber and tungsten. Achieves clear, cloudy playback sound. It also has an excellent effect on preventing vinyl records from slipping. You can see a feeling of use, such as the exterior, dullness, white stains, and abrasions (Kobayashi Hitoshi)
Accessories: stroboscope
Power cable 2.0m PSE standard product holds the OFC conductor tightly with a PVC sheath, and 24K gold plating is used for plugs and connectors with polarity display. The sound quality is sharp and punchy. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.6.29 Continuity confirmed
Accessories: none
※The paint is chipped and scratched, so it is inexpensive. The flagship was introduced as a successor to the C-290 V. This model was equipped with a newly developed AAVA and received overwhelming praise for its high quality at low volume. Although it has high resolution, it lets you listen to music smoothly with a high texture with a fine grain feel. There is a scratch on the cabinet and a small dent on the front panel (Oikawa Tetsuji)
Maintenance information: 2024.6.30 Operation confirmed
Accessories: remote control, instruction manual, power cable
Main specifications: 9 line inputs (RCA x 7/XLR x 2), 4 pre-out systems (RCA x 2/XLR x 2), W477 x H156 x D412 mm, 21.2 kg
Balanced cable 1.0m pair Accuphase standard XLR cable. Oxygen-free copper OFC Ritz wire, 2-core shielded It is a cable with excellent corrosion resistance, and has a natural, unemphasized tone. The plug shell is dull and discolored (Kojima Yosuke)
Accessories: none
The 1.5m D.U.C.C 7N Cu+ stress-free conductor machined heavyweight aluminum ring and carbon kevlar composite sleeve are eye-catching. It is a high-end cable that is excellent for SN and clearly projects sound images. There are scratches and scuffs on the plug shell (Kojima Yosuke)
Accessories: none
The 2-core gold-plated plug shield part of the 1.0m pair 7N-OFC conductor (0.1 mm diameter x 105 stranded wire structure) of the RCA cable consists of 192 high-purity 7N copper wires braided at high density. It's a clear and high-grade cable (Kojima Yosuke)
Accessories: none
The 2-core gold-plated plug shield part of the 1.0m pair 7N-OFC conductor (0.1 mm diameter x 105 stranded wire structure) of the RCA cable consists of 192 high-purity 7N copper wires braided at high density. This is a clear, high-grade cable. There is dullness around the plug (Kojima Yosuke)
Accessories: none
Speaker cable 6.0 m pair A classic BELDEN speaker cable nicknamed “sea snake” with an untreated end. The cable braided in orange and black is impressive, and it features a solid sound (Kojima Yosuke)
Accessories: none
The speaker cable 1.0 m pair custom-made terminal Y Lug 7N uses a composite copper collection centered on ultra-high purity copper, Higher-OFC with thick pure silver coating, and high-purity single crystal PCOCC, and simultaneously transmits fine and delicate information in an accurate, well-balanced, and dynamic manner at the same time as high currents. The storage case will be 2.0m (Kojima Yosuke)
Accessories: storage case
Speaker cable 2.0m pair with untreated+soldered ends, sold out type using the company's highest-grade cable material. Recommended for those who want to improve low frequency tightness. An XLO tube is wrapped around the tip ※Please be careful when pulling as the cable is stiff (Kojima Yosuke)
Accessories: none
※Since it is an old standard, it is an inexpensive HDMI cable, 1.0 m, compatible with HDMI 2.0, Silver Clad OFC conductor, an advanced model in the STARLIGHT series. Although it is an old generation video cable, it is still a model with first-line performance as an audio cable (Kojima Yosuke)
Accessories: original box
DENON's classic MC cartridge. The balance between localization and sound is excellent, and all music genres can be played without difficulty. I can recommend this cartridge to a variety of people, from analog beginners to experts (Tamai Jun)
Maintenance information: 2024.6.30 sound output confirmed
Accessories: original box instruction manual needle cover
Main specifications: MC type output voltage 0.3 mV playback frequency 20 Hz to 45 kHz electrical impedance 40 ohms needle tip 16.5 microns round needle pressure 2.2 to 2.8 g dead weight 8.5 g
High output MC cartridge for mono LPs only. Plays deep sound that was not produced with stereo cartridges. It has the vividness unique to Technica, but the three-dimensional effect and intensity are an appeal unique to mono (Hiroki Aso)
Maintenance information: 2024.6.30 sound output confirmed
Accessories: none
Main specifications: high output MC type output 1.2 mV needle pressure 2.0 g impedance 40 ohms dead weight 6.8 g
Orthophone's classic headshell. The finger tips are ergonomically designed and are designed to be easy to operate. It has a light weight and is compatible with various cartridges and tone arms (Hiroki Aso)
Maintenance information: 2024.6.30 continuity confirmed
Accessories: none
Main specifications: aluminum gold-plated terminals, dead weight 9.4 g
Orthophone's classic headshell. The finger tips are ergonomically designed and are designed to be easy to operate. It has a light weight and is compatible with various cartridges and tone arms (Hiroki Aso)
Maintenance information: 2024.6.30 continuity confirmed
Accessories: none
Main specifications: aluminum gold-plated terminals, dead weight 9.4 g
Audio-Technica headshell It is an attractive classic model with stable popularity and high versatility. The exterior is dull and has a feeling of use (Hiroki Aso)
Maintenance information: 2024.6.30 continuity confirmed
Accessories: none
Main specifications: magnesium alloy body weight 10g
Audio-Technica headshell It is an attractive classic model with stable popularity and high versatility. The exterior is dull and has a feeling of use (Hiroki Aso)
Maintenance information: 2024.6.30 continuity confirmed
Accessories: none
Main specifications: magnesium alloy body weight 10g
Audio-Technica headshell It is an attractive classic model with stable popularity and high versatility. The exterior is dull and has a feeling of use (Hiroki Aso)
Maintenance information: 2024.6.30 continuity confirmed
Accessories: none
Main specifications: magnesium alloy body weight 10g
A noise filter that removes noise emitted by a device simply by connecting it to the vicinity of a device that emits differential mode noise (differential mode noise), such as a PC, refrigerator, microwave, etc. It can also be used as a power strip, contributing to improving the sound quality of audio components connected to the same wiring in the home and power strips (Hiroki Aso)
Maintenance information: 2024.6.30 continuity confirmed
Accessories: none
A hidden masterpiece of Japanese MM cartridges. The moderately firm bass and detailed treble are attractive. A versatile cartridge that can be used for a wide range of purposes, from classical music to jazz. There are small scratches on the exterior (Tamai Jun)
Maintenance information: 2024.6.30 sound output confirmed
Accessories: needle cover
Main specifications: mm type frequency characteristics 20 Hz to 20 kHz 47 kΩ output voltage 5 mV suitable needle pressure 1.5 to 2.0 g dead weight 6.5 g
A bespoke woodworking shop, creative shed speaker stand. It also has a sense of rigidity, and the chic design is attractive. There is a feeling of use such as scratches (Ryo Mizusaki)
Accessories: none
Main specifications: W362 x H302 x D302 weight 5,5 kg
There is a diamond mark sold per bottle, 12AX7 compatible sphere, smooth plate, measured value 48 (rejected value 32), printing is erased ※The measured values indicate gM values measured with the test machine TV-7 (Kojima Yosuke)
Accessories: none
There is a diamond mark sold per bottle, 12AX7 compatible sphere, smooth plate, measured value 46 (rejected value 32), printing is erased ※The measured values indicate gM values measured with the test machine TV-7 (Kojima Yosuke)
Accessories: none
There is a diamond mark sold per bottle, 12AX7 compatible sphere, smooth plate, measured value 48 (rejected value 32), printing is erased ※The measured values indicate gM values measured with the test machine TV-7 (Kojima Yosuke)
Accessories: none
Sold per bottle, rectifier tube, made in America, JAN measurement value 50 (rejected value 40) with original box ※The measured values indicate gM values measured with the test machine TV-7 (Kojima Yosuke)
Accessories: original box
250mm caliber powered subwoofer Genuine AXISS The crossover is also continuously variable from 30 to 160 Hz, making it easy to set. It is recommended for those who want to easily build a surround sound. The exterior has peeling paint, scratch marks, etc. Serial 000529 (Tamura Eiji)
Maintenance information: 2024.6.29 sweep check OK
Accessories: power cable, instruction manual
Main specifications: rated output 160 W, crossover 30 to 160 Hz, continuously variable, W305 x H508 x D485 mm, weight 22 kg