*Lead wire missing. Denon's classic shell. This is a genuine DA-305 shell. There is plenty of room around the lead wire, and various cartridges can be attached (Fujisawa Yukishi)
Maintenance information: 2024.6.25 continuity confirmed
Accessories: No accessories
Main specifications: dead weight 7g
An Audionix shell that acted as an agent for Autophone in the 1970s. It feels like the MG-10 is slimmer and lighter, and the letters and curves of the brand name are stylish. *Lead wire missing (Fujisawa Yukishi)
Maintenance information: 2024.6.25 continuity confirmed
Accessories: No accessories
Main specifications: Glass fiber reinforced resin mold, dead weight 8g
with logo! This headshell is popular due to its combination with the Technics and SL-1200 series. It is made of highly rigid die-cast aluminum and brings out the characteristics of the cartridge (Fujisawa Yukishi)
Accessories: No accessories
Main specifications: Die-cast aluminum, dead weight 10.2 g
The price has been reduced! 2024/6/25 sales price 64,800 yen PEERLESS low impedance boost transformer SLC-1. Both the thickness of the low frequencies and the subtlety of the high frequencies are perfect, and overall it is a boost transformer with a thick, glossy sound. There are scuffs on the exterior. Serial 601029 (Fujisawa Yukishi)
Maintenance information: 2024.6.25 Operation confirmed
Accessories: No accessories
Main specifications: impedance 1 to 6 ohms, 1 input/output system each, W135 x H85 x D157 mm 1.6 kg
The long arm model with Amtrans arm base is now in stock for the first time! The arm base is SME type. Pure straight FIDELIX tone arm with hard stainless steel and gemstone bearings. The product name is “0 sideForce” because the arm always moves horizontally to balance even when side force is generated, so no canceller is required and the side force becomes 0. It is in good condition with no noticeable scratches. (FUJISAWA KOSHI)
Maintenance information: 2024.6.25 continuity confirmed
Accessories: instruction manual, arm cable, screws, shell, cleaner, subway
Main specifications: distance between hard stainless steel (SUS304) turntable and center of arm 299 mm ± 4 mm distance between arm fulcrum and needle point 281 mm underhang 18 mm mounting hole φ30 mm compatible cartridge to 28.5 g (compatible up to 35.5 g when using a sub-weight)
The long arm model with Amtrans arm base is now in stock for the first time! The arm base is SME type. Pure straight FIDELIX tone arm with hard stainless steel and gemstone bearings. The product name is “0 sideForce” because the arm always moves horizontally to balance even when side force is generated, so no canceller is required and the side force becomes 0. It is in good condition with no noticeable scratches. (FUJISAWA KOSHI)
Maintenance information: 2024.6.25 continuity confirmed
Accessories: instruction manual, arm cable, screws, shell, cleaner, subway
Main specifications: distance between hard stainless steel (SUS304) turntable and center of arm 299 mm ± 4 mm distance between arm fulcrum and needle point 281 mm underhang 18 mm mounting hole φ30 mm compatible cartridge to 28.5 g (compatible up to 35.5 g when using a sub-weight)
This model was fully restored by our company in 2016. Furthermore, exterior maintenance and interior maintenance have also been completed. The popular LUXMAN classic 38 series. The graininess and fineness of the sound have been brilliantly revived. The soft, warm, and thick sound is soothing from the core (Sasaki Shota)
Maintenance information: 2024.6.25 Maintained (parts replacement, input/output waveform confirmation, load test (1 kHz sine wave, 8 ohm load: 28 W+28 W, actual measurement), sound output test. Exterior repair/polishing/painting)
2016.11.6 Maintained (9P socket, volume/BAL/BACK, TC VR, headphone jack, SP terminal board, RCA terminal, resistor, coupling capacitor, AC cord replacement. Lever SW overhaul, adjustment, and characteristic check are OK. Clear cabinet finish Fill in square putty, color repair. (Top plate grill paint)
Accessories: copy of the manual
Main specifications: 30W+30W frequency characteristics 10Hz-50kHz vacuum tube/12AX7 x 3, 12AU7 x 3, 6267 x 2, 50C-A10 x 4, W476 x H190 x D335 mm 18 kg
3rd generation voicing equalizer. Sound field correction/sound field creation is possible freely in the listening room by simply operating the touch panel screen with a single pen. How about a companion to your pursuit of a music space of your choice? The microphone holder has been changed to an Audio-Technica AT8407 (Shota Sasaki)
Maintenance information: 2024.6.25 Operation confirmed
Accessories: remote control, manual, power cable, original box, connection cable, microphone, stylus, microphone holder (AT8407)
Main specifications: 35 band real-time playback frequency characteristics 0.5 to 50,000 Hz (sampling frequency 2.8224 MHz or 192 kHz) 4.0 to 20,000 Hz digital input/output: HS-Link, coaxial digital, 1 optical digital system each dimensions W465 x H151 x D396 mm weight 13.8 kg
※Currently sold, the remote control is out of stock, so it is cheap. Second generation model in Denon's entry-class 390 series. A sense of energy above the price, and a sound with a clear outline of the mid-range. The cost performance is high! You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.6.24 Operation confirmed
Accessories: none
Main specifications: 50W+50W (8Ω) PHONO (MM) 1 line input 3 system tape system 1 system W434 × H121 × D338 mm 7 kg
The 4-piece insulator set has a unique three-dimensional special support structure, making effective use of the beneficial vibrations of the equipment and preventing the occurrence of harmful vibrations. The appearance is fine, with no noticeable scratches, etc. (Kobayashi Hitoshi)
Accessories: original box
Main specifications: load capacity 25 to 50 kg/4 pieces, diameter 50 x 35 mm, weight 135 g/1 piece
Comes with original box. Sennheiser Bluetooth 5.0 compatible headphones. It is a product that is compatible with Sennheiser's proprietary SmartControl application, has a 30-hour battery life, and high cost performance. Low frequency playback is good! The appearance is good with little feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.6.23 Operation confirmed
Accessories: original box
Main specifications: frequency band 18 Hz to 22,000 Hz adapter 3.5 mm cable length 1.5 m weight 238 g
Maintained. The highest stereo power amplifier in the company's X series. It is an American sound from the good old days, and it drives the speaker briskly and powerfully. The dry, straight sound is a gem that is still highly popular with enthusiasts. The power gauge design is also impressive. You can see a feeling of use such as appearance, dullness, small scratches, etc. (Kobayashi Hitoshi)
Maintenance Information: 2019.4.7 Maintained (transistor, power transistor, fuse replacement. Exchange OP AMP and coupling C in the display circuit. Replace coupling C, bypass C, etc. in both channel driver boards. Output mute relay contact polishing. Operation check)
Accessories: none
Main Specifications: 250W+250W (8Ω) HYPERSONIC A CLASS AMPLIFIER W485 × H185 × D390 mm 24kg
Exterior maintenance completed! The SP-LE8T has an eye-catching antique lattice design. Although the range is moderate, it is a gem that is highly popular with vocal fans due to its good tone. The 3 kg Alnico magnet makes a firm, firm sound (Kobayashi Hitoshi)
Maintenance information: 2024.6.25 Maintenance completed (enclosure polishing, oil/wax coating, baffle painting, lattice repair/polishing/painting, backing fabric replacement, unit maintenance: floating edge reattachment, cone paper coating, unit detachment)
Accessories: saran net
Main specifications: 1 way 1 speaker 20W 8Ω 89dB W358 x H596 x D300 mm 18.3 kg
※6 month warranty Mount Altec's 405-8B full range unit in a self-made backload enclosure. The enclosure is well-built. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.6.23 Operation confirmed
Accessories: saran net
Main specifications: W200×H460×D220mm 6.6kg (actual measurement)
Maintained in 2018! This α907 limited model is limited to 2000 units. A premain amplifier that stands out for its high SNR and good sound unique to MOS-FET. The fine particle feel in the mid to high range is one of the best in the history of SANSUI premain amplifiers. Coupled with the thick, energetic mid-low range, it is a famous model that has not faded its appeal even now. There is a thin line scratch on the top plate. Serial 605072028 (Fujisawa Yukishi)
Maintenance information: 2024.6.24 Operation confirmed
2018.2.28 Maintained (power unit disassembly inspection, solder correction, all switch volume cleaning)
Accessories: copy of instruction manual
Main specifications: 80W+80W (8Ω) MM/MC compatible MOS-FET use W466 × H166 × D453 mm 34 kg
※It has a cigarette smell, so it's cheap. A virtual earth for acoustic revival. By connecting this unit to an audio device, the device's potential and electric field are dropped into the main unit. Even those in an environment where an ideal ground ground has already been drawn can be expected to improve sound quality by using RGC-24 (Daiki Goto)
Accessories: instruction manual, original box
Main specifications: cable length 60 cm
An airbow well float board that is easy to use for compact speakers and DACs. By ideally floating amplifiers, speakers, etc., it efficiently blocks the adverse effects of vibrations transmitted from floors, stands, tables, etc., greatly reduces sound turbidity, greatly enhances the transparency of sound quality, and realizes a stress-free expansion of sound field space. There is a feeling of use on the exterior such as small scratches and dullness (Tamai Jun)
Accessories: none
Main specifications: size W210 x D295 mm x H58 mm
A record player equipped with a double arm in a set of double arm cabinets developed for TT series turntables and motors developed by inheriting the company's TT-101 technology. A high-torque brushless motor is used as the motor, and it has a reputation for stable operation. This is one that seems to allow you to thoroughly enjoy your favorite cartridge, such as listening and comparing with 2 types of arms. Overall there are small wounds, dullness, etc. (Oikawa Tetsuji)
Maintenance information: 2024.6.24 Operation confirmed
Accessories: none
Main specifications: [TT-81] 33/45 rotation compatible quartz lock DC servo direct drive [CL-P2D] external dimensions W565xH202xD508 mm body weight 8.8 kg dust cover weight 2.5 kg [MA-202] total length 335 mm effective length 237 mm height adjustment range 44.5 mm to 57.5 mm compatible cartridge (dead weight) 4 to 6 g needle pressure variable range 0 to 3 g [G-940] 1 point support Oil dump type effective length 237 mm overhang 15 mm mounting cartridge weight 3 to 17 g needle pressure adjustment 0 to 3 g (0.1 g steps)
LINN's AXIS with Basik Plus mounted on the arm! The basic structure etc. are close to LP12, and it demonstrates cost performance that exceeds the price. Unlike the LP12, it can also be set to 33.45 revolutions, so I recommend it. There are scratches on the dust cover on the exterior, and screw scratches on the shell part. Serial 007206 (Fujisawa Yukishi)
Maintenance information: 2024.6.24 Operation confirmed
Accessories: power cord
Main specifications: phono motor section/AXIS belt drive tone arm/Basik Plus static balance type total length 284 mm effective length 229 mm overhang 18 mm compatible cartridge 2 to 10 g needle pressure range to 3 g (0.1 g step) headshell fixed type W443 x D345 x H140 mm 7.68 kg (actual measurement)
XLR male to XLR female cable 1.0m enables highly transparent transmission even in environments with high hum, noise, EMI, and RFI. The degree is generally good (Murakoshi Yoichi)
Maintenance information: 2024.6.22 continuity confirmed
Accessories: original bag (alternative)
Spikes are missing. Popular 4-tier audio rack It has a sturdy construction with a metal frame. A space-saving design with the outer dimensions cut down to the last minute and the internal dimensions extended to the last minute. It brings out the performance of the device with tight and accurate sound quality. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Accessories: none
Main specifications: 4 tier rack cast iron frame W540×D484×H935mm 41kg
Spikes are missing. Popular 5-tier audio rack It has a sturdy construction with a metal frame. The size has been cut down to the last minute to the outer dimensions, and the internal dimensions have been expanded to the last minute in a space-saving design. It brings out the performance of the device with tight and accurate sound quality. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Accessories: none
Main specifications: 5-tier rack cast iron frame height adjustable (pitch 60 mm) W540 x H1175 x D483 mm approx. 48 kg
This compact speaker became a hot topic due to its use of pure malt material (whiskey barrel material). The good atmosphere of the enclosure makes it popular as an interior decoration. The tone is mild and supple, and the sound quality has a high texture that is suitable for listening for a long time. The appearance is fine, with no noticeable scratches, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.6.21 Operation confirmed
Accessories: 2 types of saran nets (wine, moss green), instruction manual
Main specifications: woofer 10cm cone type, tweeter 2cm dome type W154 x H246 x D213 mm 3.7 kg
Fostex horn-shaped super tweeter. It has a built-in network circuit with an attenuator and is easy to use. The super tweeter unit uses an Alnico magnet machined from aluminum alloy to reproduce clear horn-like sounds. A feeling of use such as scratches and abrasions can be seen on the exterior and upper front corner (Kobayashi Hitoshi)
Maintenance information: 2024.6.21 Operation confirmed
Accessories: none
Main specifications: impedance 8 ohms playback frequency band 7 kHz to 35 kHz output sound pressure level 102 dB built-in network 6 dB with continuously variable ATT W146 x H107 x D159 mm 1.7 kg
※6 month warranty It is a full range that combines straightforward mid-high frequencies with sufficient low frequency characteristics, and has high cost performance with rich musicality. I'd like to try setting it to Swan. There are stains on the exterior and the magnet, but they are generally good (Kobayashi Hitoshi)
Maintenance information: 2024.6.21 Operation confirmed
Accessories: instruction manual, original box
Main specifications: 10cm caliber full range unit frame type (number of holes): high-rigidity die-cast aluminum frame (8 holes), diaphragm, etc. (material): cellulose nanofiber coating HP shape diaphragm 1.83 kg
For the first time in this class, silver wire and a solid elliptical needle were used as power generation coils. Also, the combination of the Boron cantilever used only in higher-level models and the Shibata needle stylus tip is excellent, and by combining this with an Aucurum (gold-plated 6N high purity conductor) power generation coil, the sound is one rank higher. The sound creation that is both moist while having a wide range is truly amazing (Murakoshi Yoichi)
Maintenance information: 2024.6.18 sound output confirmed
Accessories: original box, needle cover, instruction manual, mounting screws
Main specifications: MC type output voltage 0.5 mV frequency band 20 Hz to 25,000 Hz needle pressure 2.3 g dead weight 9 g impedance 20 ohms
A popular SME classic headshell with a stylish design. It's lightweight, which is essential for light needle pressure arms and heavy cartridges, and after all, this is the best fit for SME arms. There is paint removal on the screw hole (Murakoshi Yoichi)
Maintenance information: 2024.6.18 continuity confirmed
Accessories: none
Main specifications: aluminum stamping dead weight 8g
※6 month warranty The original stand is missing. This is an entry model ribbon tweeter that is easy to use. It plays a solid, detailed sound all the way up to the top, so it's also recommended for those who want to correct or enhance the top a little more. There is a feeling of use due to appearance, dullness, small scratches, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.6.21 Operation confirmed
Accessories: original box
Main specifications: ribbon type tweeter with short horn playback frequency band 10,000 to 120,000 Hz impedance 8 ohms crossover frequency 10 kHz or more maximum input 60 W size W87 ✕ H63.5 ✕ D 144 mm weight 1.2 kg
This is a TAOC 4-tier rack. A beautiful form is achieved by adopting a die-cast aluminum frame and aluminum struts. Cast iron insulators arranged at each point absorb vibrations efficiently. There are small scratches scattered on the frame, line damage on the shelf board, and a feeling of use (Murakoshi Yoichi)
Accessories: spikes
Main specifications: shelf board W500 x D450 mm shelf spacing 180/180/280 mm load capacity 100 kg per tier W595 x H825 x D530 mm approx. 34.0 kg
It is a headshell that is standard mounted on the IT-345CR1 and IT-407CR1, which are the company's tone arms, and the geometry settings assume that a 9-MUSA series cartridge is attached, and the finish is the same chrome plated finish as the arm. Of course, cartridges made by other companies can also be installed. The appearance is good with little feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.6.18 Continuity confirmed
Accessories: none
Main Specifications: Dead Weight: 17.2 g Body Material: Machined Hard Aluminum Exterior Finish: Chrome Plated Finish Connector Side Terminal: Rhodium Plated
Popular wood headshell Asada cherry blossoms from Hokkaido are used as the material, and it is a hard, good-sounding material that is also used for speakers and headphone cases. There is a feeling of use (Kanai Hidetsugu)
Maintenance information: 2024.6.22 continuity confirmed
Accessories: none
Main specifications: Hokkaido Asada cherry heartwood self-weight 10.4 g
Lead wires are missing. SAEC headshell Lightweight, non-resonant head shell made of aluminum light alloy composite. It's light, easy to use, and has an appealing sound that sounds straightforward. On the exterior, there is a scratch on the screw mounting part (Murakoshi Yoichi)
Maintenance information: 2024.6.22 continuity confirmed
Accessories: none
Main specifications: aluminum alloy with a dead weight of about 8 g
Orthophone stroboscope and strobe light set RPM errors of 78, 45, and 33 1/3 are displayed. You can check the exact number of revolutions even in homes with LED lights (Murakoshi Yoichi)
Maintenance information: 2024.6.22 operation confirmed
Accessories: instruction manual, original box
Main specifications: 50Hz/60Hz environment compatible body dimensions W67 x H27 x D68 mm 0.17 kg (including disc)
*Currently sold. Luxman vacuum tube hybrid premain amplifier. This product was designed as an upper model of the LXV-OT7. The vacuum tube ECC802S is on the front part, the volume has been increased in size from the previous model, the input terminals are gold-plated, the speaker terminals are banana compatible, and some other parts have been changed to solid aluminum, so the finish is particular about appearance. The appearance is good with little feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.6.18 Operation confirmed
Accessories: power cable
Main specifications: output 5W+5W (4Ω) input RCA2 system W192 × H107 × D98 mm 1.0 kg (actual measurement)
Vacuum tube graphic equalizer in the ONTOMO MOOK appendix. 5 bands (55, 220, 880, 3.5 k, 14 kHz) can be adjusted by ±8 dB. It comes with an ON/OFF switch for the GEQ function, so you can play easily. The appearance is fine, with no noticeable scratches, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.6.18 Operation confirmed
Accessories: power cable
Main Specifications: Input Impedance: 500 kΩ Output Impedance: 330 Ω Frequency Characteristics: 20 to 100 kHz S/N Ratio: 100 dB Crosstalk: 80 dB or less W183 x H120 x D88 mm 0.9 kg
Lead wire missing. OYAIDE carbon shell with a modern, spartan design that won the AEX Audio Famous Machine Award. It is a product that is particular about the direction of carbon fiber (Murakoshi Yoichi)
Maintenance information: 2024.6.18 sound output confirmed
Accessories: none
Main specifications: 4.0mm thick CFRP (17-layer preg material) self-weight 10.7 g
MODEL501 minor change model. It is a model in which the output was raised to 0.4 mv, and the length of the cantilever was slightly shortened to improve trace capability. Excellent sharpness and straight bandwidth balance (Murakoshi Yoichi)
Maintenance information: 2024.6.18 sound output confirmed
Accessories: needle cover
Main specifications: MC type oval solid diamond output voltage 0.4 mV dead weight approx. 8 g needle pressure range 1.4-1.8 g dead weight 8 g
A hybrid board with iron balls sandwiched between them. It is mainly used as an undercarriage for small speakers. It's a well-balanced board that has a sense of volume and isn't too tight. There is noticeable peeling of the veneer on the exterior and sides, and dullness and a feeling of use can be seen (Kobayashi Hitoshi)
Accessories: none
Main specifications: load capacity approx. 150 kg W300 x H55 x D400 mm 8.5 kg
8 mm thick and thin audio board pair Since all racks and boards made of hard materials have unique resonance frequencies, they can be reborn with high resolution sound without colorization by placing them between the audio device and stand. There is a feeling of wear on the exterior (Tamai Jun)
Accessories: none
Main specifications: size W460mm×D300mm×H8mm
Audio-Technica headshell. It is an attractive classic model with stable popularity and high versatility. The exterior is good with little feeling of use (Shota Sasaki)
Accessories: none
Main specifications: magnesium alloy body weight 10g
Maintained! Mid-range driver unit with YL acoustics. It's an energetic and clear sound typical of YL. The exterior has small scratches, dullness, and corrosion on the metal parts
Maintenance information: 2024.6.23 Maintained (improved internal terminal contact: improved contact between aluminum coil and terminal. Strain adjustment: complete maintenance of diaphragms, coils, and noise suppression)
Accessories: original box
Main specifications: Playback frequency band 200-7000 Hz maximum input 30W 8Ω output sound pressure level 102 dB diameter 110 x D120 mm 3.30 kg
*Since there is a slight rotational eccentricity, it is currently sold at a low price. The brush on the back left is designed to be simply placed on. There is no problem with the vacuum function. Comes with original box Even microscopic dirt is removed, and the vacuum method is used for strong suction. Furthermore, it is the latest record cleaner that also has a static elimination function and revives sound. The cleaning solution is about 40%. The exterior is dirty, dull, and has a feeling of use (Oikawa Tetsuji)
Maintenance information: 2024.6.23 Operation confirmed
Accessories: instruction manual, original box, cleaning cloth, 2 types of cleaning liquid, brush
Main specifications: power consumption 690W W420 x H250 x D370 mm 11.2 kg
※2-tier type. The size is one size smaller than the company's Q4D, etc., so the size setting is just right for those using compact systems such as LINN. There are scratches on the exterior (Mizusaki Ryo)
Accessories: 4 optional spike bases
Main specifications: W395 x H250D x 395 mm 3.7 kg (actual measurement)
※2-tier type. The size is one size smaller than the company's Q4D, etc., so the size setting is just right for those using compact systems such as LINN. There are line scratches and bumps on the top plate (Mizusaki Ryo)
Accessories: 4 optional spike bases
Main specifications: W395 x H255 D x 395 mm 4.0 kg (actual measurement)
Maintained! A masterpiece power amplifier with an all-FET circuit configuration. The size of the sound stage and the quick attack and the way the penetrating sound disappears are excellent. The hairline finish on the front panel and the LED switch with an impressive orange light are also attractive. The exterior has dullness, small scratches, and cracks on the speaker terminals. Serial 02545 (Fujisawa Yukishi)
Maintenance information: 2024.5.23 Maintained (replacement of defective parts in the main amplifier power supply circuit. Output relay replacement. Input volume contact correction)
Accessories: copy of instruction manual
Main specifications: 350W+350W (4Ω) 240W+240W (8Ω) W435 × H182.7 × D361.5 mm 20.9 kg
The digital cable 1.0m BNC terminal STV6 silver clad OCC high-purity copper conductor has a parallel arrangement structure that neutralizes and makes the flow of electricity accurate, enabling more accurate transmission. It's clear, has no habits, and is easy to handle (Fujisawa Yukishi)
Maintenance information: 2024.6.23 continuity confirmed
Accessories: original box
The digital cable 1.0m BNC terminal STV6 silver clad OCC high-purity copper conductor has a parallel arrangement structure that neutralizes and makes the flow of electricity accurate, enabling more accurate transmission. It's clear, has no habits, and is easy to handle (Fujisawa Yukishi)
Maintenance information: 2024.6.23 continuity confirmed
Accessories: original box
The PE-101 reprint unit commemorating the 70th anniversary of Pioneer's founding is set in a dedicated enclosure that is well-made, such as using natural wood laminated wood as the material. Sound quality is balanced between good localization and playback band. There is dullness and small scratches. (FUJISAWA KOSHI)
Maintenance information: 2024.6.23 Operation confirmed
Accessories: original box, saran net
Main specifications: 10cm full range single cone speaker 8Ω fo to 20,000 Hz 90.5 dB W154 x H246 x D204 mm, approx. 3 kg/book (actual measurement)
Digital cable, 1.0m, XLR terminal, silver-clad OCC high-purity copper conductor, has a parallel arrangement structure that neutralizes and makes the flow of electricity accurate, enabling more accurate transmission. It's clear, has no habits, and is easy to handle. (FUJISAWA KOSHI)
Maintenance information: 2024.6.23 continuity confirmed
Accessories: original box