*Currently sold. First arrival! A stereo power amplifier using germanium transistors. It sounded right away at the store, but the sound is much softer and more soothing than the sound of silicone. The output is modest, but it's good enough as long as it's not loud. There are 2 non-genuine simple adapter types as power supply units (Sasaki Shota)
Maintenance information: 2024.7.4 sound output operation confirmed
Accessories: Power supply unit x 2
Key Specifications: Germanium stereo power amplifier 3W+3W
*Set of 2 Acoliba RCA short pins. A completely non-magnetic structure using materials with excellent acoustic and vibration suppression. Sound quality is improved by shorting unused input terminals. *Never insert into RecOut or output terminals. It is not covered by the warranty even if the sound stops coming out or if it breaks down by any chance (Murakoshi Yoichi)
Accessories: none
*Set of 2. RCA output terminal cap. The completely non-magnetic structure exerts a high damping effect by inserting it into the RCA output terminal, and further improves sound image localization and signal-to-noise ratio (Yoichi Murakoshi)
Accessories: none
A cable insulator that is used by wrapping it around a cable. The effect changes in various ways by wrapping the entire cable or wrapping it partially, so you can enjoy attaching it to the desired part. Compatible with connected use, can also be used on long cables (Takasaki Atsushi)
Accessories: none
Main specifications: Compatible cable diameters up to 20 mm, compatible cable length 0.75 to 1.5 m
Set of 4 Solderless, brass+rhodium plated premium banana plug A double screw system is used to securely lock the cable. *A wrench is required to fix the cable. There is a feeling of use (Murakoshi Yoichi)
Accessories: none
Main specifications: Compatible with cable diameters of 1.5 to 4.0 mm
*Currently sold is a TEAC double cassette deck. Basic operations such as turning on the power, recording, playback, fast forward, and rewind have been confirmed, but since they are inexpensive, they are currently being sold. The exterior is dull and has a feeling of use. Serial 1160297 (Takahashi Nobuyuki)
Maintenance information: 2024.7.4 operation confirmed
Accessories: instruction manual remote control
Main specifications: W435 x H127 x D292 mm 3.9 kg
Comes with Grace HS-3 GE Valirella mono cartridges for LP/SP. The SP/LP stylus is inserted into a T-shaped holder and is a flip-over type that can be used by switching with the knob on the back. You can enjoy the thick, powerful, and exhilarating sound. There is dullness on the body that has deteriorated over time ※finger straps are out of stock (Oikawa Tetsuji)
Maintenance information: 2024.7.3 operation confirmed
Accessories: none
Main specifications: dead weight 20.6 g (actual measurement, including shell)
Designed for the purpose of absorbing and diffusing sound over a wide band, it has excellent absorption capacity in the low range, and effectively removes fixed material waves by installing it in the corner of a room (Daiki Goto)
Accessories: none
Main specifications: size 1200 mm x 240 mm, weight 4.1 kg (actual measurement)
Designed for the purpose of absorbing and diffusing sound over a wide band, it has excellent absorption capacity in the low range, and effectively removes fixed material waves by installing it in the corner of a room (Daiki Goto)
Accessories: none
Main specifications: size 1200 mm x 240 mm, weight 4.1 kg (actual measurement)
Designed for the purpose of absorbing and diffusing sound over a wide band, it has excellent absorption capacity in the low range, and effectively removes fixed material waves by installing it in the corner of a room (Daiki Goto)
Accessories: none
Main specifications: size 1200 mm x 240 mm, weight 4.1 kg (actual measurement)
Designed for the purpose of absorbing and diffusing sound over a wide band, it has excellent absorption capacity in the low range, and effectively removes fixed material waves by installing it in the corner of a room (Daiki Goto)
Accessories: none
Main specifications: size 1200 mm x 240 mm, weight 4.1 kg (actual measurement)
Maintained! A pure Class A premain amplifier from the early days of the musical Fidelity. The top plate heats up due to the high calorific value, but it is a famous machine that still boasts high popularity for its elastic, bouncy mid-low range, and smooth, thick mid-high range sounds. The beauty of the simple design is also attractive. There are small scratches and scratch marks on the exterior. Serial 11418 (Tamura Eiji)
Maintenance Information: 2024.7.3 Maintained (input selector switch contact cleaning. The TAPR and MM/MC changeover push switches were replaced due to poor contact. 17 capacitors were replaced due to differences in electrolyte condenser fluid leak levels. (Each input/output operation check is OK)
Accessories: instruction manual
Main specifications: pure A grade 20W+20W (8Ω) W408 x H60 x D249 mm 5.5 kg
Audio switching hub. It is an audio switching hub that can be used between network players and NAS. Simply plug in the power cable and you can use it right away. There is no need for troublesome settings. There are small scratches on the exterior. Serial 016100 (Tamura Eiji)
Maintenance information: 2024.7.3 operation confirmed (originally the access lamp does not light up)
Accessories: none
Main specifications: W230 x H55 x D190 mm weight 1.4 kg
Comes with original box. JICO respects the popular MM cartridge M44G, which has been discontinued by SHURE, and has released cartridges that can use genuine replacement needles of the existing SHURE 44 model and JICO replacement needles as they are. If you love the M44G, don't miss it! (FUJISAWA KOSHI)
Maintenance information: 2024.7.3 operation confirmed
Accessories: original box, instruction manual
Main specifications: mm type output voltage 5.0 mV to 8.0 mV playback frequency 20 Hz to 20 kHz needle pressure 1.5 to 3.0 g dead weight 5.6 g
It is an isolator that can be used with any PC or network audio device that has a USB output. Improved signal-to-noise ratio and increased resolution have the effect of further improving the amount of information. (FUJISAWA KOSHI)
Maintenance information: 2024.7.3 operation confirmed
Accessories: No accessories
Main Specifications: W130xD65xH25mm Weight 170g Aluminum Case Host Side: USB-B Device Side: USB-A
The 1.8 m PSE standard PCOCC-A conductor 3-layer shield plug is phosphor bronze plated with gold and palladium, and a tight sound comes to the front, giving it a sense of dynamism. Although it is an affordable cable, you can feel significant changes due to power cables, and it is a high cost power cable. ※The wire material is hard, and this cable is slightly difficult to handle. (FUJISAWA KOSHI)
Maintenance information: 2024.7.3 continuity confirmed
Accessories: No accessories
Due to the unprocessed twist specification at the 3.9 m pair end of the speaker cable, it is less susceptible to sound quality deterioration due to magnetic effects, and the sound is straight. (FUJISAWA KOSHI)
Maintenance information: 2024.7.3 continuity confirmed
Accessories: No accessories
This is the first Nordst product to use patented micro monofilament technology for a 0.7 m pair of RCA cables. It is an inexpensive cable with good cost performance. ※The rubber on the single-channel terminal is out of stock (Tamura Eiji)
Maintenance information: 2024.7.3 continuity confirmed
Accessories: none
Comes with a pedestal. Super tweeter using an aluminum alloy thick cylindrical horn and an ultra-lightweight ring diaphragm. It expands the well-stretched, clean high frequency range. There is an entry in the manual (Tamura Eiji)
Maintenance information: 2024.7.3 oscillator check OK
Accessories: pedestal, instruction manual
Main specifications: Alnico magnet, 8Ω, playback frequency band, 5kHz to 35kHz, output sound pressure level, 106dB, recommended crossover, 7kHz or higher, input 50W, 800g/book
Luxman High Definition Speaker Selector It's a long-running model. The discrete design where each ground circuit is switched, and 6N wires are used for internal wiring, etc., and the special configuration typical of the company shines. The speaker terminals are also compatible with banana and Y lug terminals. Serial 2820-1G2 (Tamura Eiji)
Maintenance information: 2024.7.3 continuity check OK
Accessories: none
Main specifications: 1 input system, 3 SP output systems, W370 x H71 x D164 mm, 3 kg
The 1.5m power cable is made of Acrolink's unique ultra-high purity DUCC 7N Cu, and 50 0.37φwires with stress-free processing are twisted to avoid mutual interference and noise. Try it out with a classical symphony. You can see the exterior, dullness, scuff marks, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.6.24 continuity confirmed
Accessories: none
Material, set of 4 spikes with unknown details. It is very similar to the J1 Project cone spike and has the same screw diameter. How about amplifiers, CD players, etc. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Accessories: none
Main specifications: screw pitch 8 mm diameter 40 mm height 26 mm 23.7 g
PSE certified product. Matsushita's classic power plug opened up the world of audio power plugs. It is a hospital grade long-time seller that can be used by beginners to advanced users. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Accessories: none
VCYOYO (Mitsuke Seiki) spacer for SMEs. It is used to match the height when combining GARRARD and SME tonearms. Made of brass with a focus on sound quality. There is a light scratch on the back of the attachment (Murakoshi Yoichi)
Accessories: none
Main specifications: Height approx. 9.5 mm
Set of 4 banana plugs High sound quality solderless (no solder). This is a banana plug with a screw fastening system. It is an orthodox and easy to use plug. The appearance is good with little feeling of use (Kobayashi Hitoshi)
Accessories: original box
THORENS INSULATOR SET OF 3. It comes with a screw-type height adjustment function, but as expected, it is made in Switzerland, and the accuracy of how the screw rotates is excellent, and correction at extremely subtle pitches is possible. You can see the exterior, dullness, abrasions, etc. and a feeling of use (Murakoshi Yoichi)
Accessories: original box
Main specifications: diameter 35 mm, height 30 to 35 mm, dead weight 53.1 g (actual measurement)
1 pair of unspecified speaker terminals. It is bi-wire compatible. If you've been looking for one, take this opportunity. The appearance is good with little feeling of use (Kobayashi Hitoshi)
Accessories: none
Main specifications: W137 x H81 x D105 mm 112 g (actual measurement)
1 pair of unspecified speaker terminals. It is bi-wire compatible. If you've been looking for one, take this opportunity. The appearance is good with little feeling of use (Kobayashi Hitoshi)
Accessories: none
Main specifications: W137 x H81 x D105 mm 112 g (actual measurement)
1 pair of unspecified speaker terminals. It is bi-wire compatible. If you've been looking for one, take this opportunity. The appearance is good with little feeling of use (Kobayashi Hitoshi)
Accessories: none
Main specifications: W137 x H81 x D105 mm 112 g (actual measurement)
The 1.0 m pair of conductors in the balance cable consists of 19 7NCU 0.26φstrands (white/right winding/black/left wound). The plug is machined from carbon fabric+aluminum alloy solid wood. The realistic sound output, which is transparent and has no habit, has a sense of reality is attractive. You can see a feeling of use on the exterior, dullness, scratches, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.6.24 continuity confirmed
Accessories: none
Set of 4 insulators An audio alchemy insulator using a patented special polymer. It is thought to be unused, but there is stickiness (Kobayashi Hitoshi)
Accessories: case
Main specifications: diameter 48mm height 13mm
Set of 4 insulators An audio alchemy insulator using a patented special polymer. It is thought to be unused, but there is stickiness (Kobayashi Hitoshi)
Accessories: case
Main specifications: diameter 48mm height 13mm
An MC boost transformer that uses two transformers taken from the same console (microphone input transformer) in the 1940s. Detailed specs are unknown. The 2 system inputs can be switched with a toggle switch (Daiki Goto)
Maintenance information: 2024.7.2 storefront operation confirmed
Accessories: none
Main specifications: W100×D135×H100mm
※It is glued to the pedestal. A horn tweeter with an Alnico magnet, horn type, and attractive specs with high efficiency. It is sharp and has excellent penetrating power. There is dullness and small scratches (Daiki Goto)
Maintenance information: 2024.7.2 operation confirmed
Accessories: none
Main specifications: Hard aluminum alloy diaphragm, Alnico magnet, frequency characteristics, 5kHz to 35kHz, impedance 8Ω, output sound pressure level, 106 dB, recommended crossover, 7 kHz, baffle opening dimensions: 61 mm, weight: 720g
Sold per bottle, rib plate with diamond mark, 12 AU7 compatible sphere, measured value 102 (rejected value 56) with white box, printing is often erased ※The measured values indicate GM values measured with the testing machine TV-7 (Kojima Yosuke)
Accessories: white box
Sold per bottle, smooth plate with diamond mark, 12AU7 compatible sphere, measured value 104 (rejected value 56) with white box ※The measured values indicate gM values measured with the test machine TV-7 (Kojima Yosuke)
Accessories: white box
Sold per bottle, smooth plate with diamond mark, 12AU7 compatible sphere, measured value 112 (rejected value 56) with white box ※The measured values indicate gM values measured with the test machine TV-7 (Kojima Yosuke)
Accessories: white box
Phono cable uses a conductor that is a hybrid of high-purity oxygen-free copper, centering on 1.5m RCA-RCA specification ultra-high purity 6N copper. It is a model that incorporates various technologies in order to eliminate the ultra-fine low output power loss of MC cartridges as much as possible. (FUJISAWA KOSHI)
Maintenance information: 2024.7.2 continuity confirmed
Accessories: No accessories
Extremely beautiful item with original box! Triple capsule type keeper TRI-CAPSULE. Up to 3 cartridges with headshells can be stored. The slit capsule allows you to store the finger part of the headshell without difficulty. (FUJISAWA KOSHI)
Accessories: original box
RCA cable 1.0 m pair 6NCU (99.9999% pure copper), PCOCC, pure silver coated HIGHER-OFC, high-purity oxygen-free copper are characters that are easy to listen to with just the right amount of delicacy and volume. (FUJISAWA KOSHI)
Maintenance information: 2024.7.2 continuity confirmed
Accessories: No accessories
Beautiful item with original box! There is no evidence that it has been used, so it seems that it is close to unused. Audio-Technica adhesive cartridge needle tip cleaner. We use high quality Japanese gel that maintains viscosity for a long time. To use, lightly apply the needle tip of the cartridge to the adhesive surface several times to remove dust. (FUJISAWA KOSHI)
Accessories: instruction manual, original box
This is a higher-level model that uses a solid Shibata needle that realizes rich mid to low frequency reproduction. It is an excellent model that stands out for its ample range, quick start-up, and realism. (FUJISAWA KOSHI)
Maintenance information: 2024.7.2 operation confirmed
Accessories: No accessories
Main specifications: VM type playback frequency range 20 to 27,000 Hz output voltage 4.0 mV needle pressure 2.0 g W17 ✕ H17.3 x D 28.2 mm mass 8.0 g
Audio-Technica entry class VM cartridge. It has a bright and light sound that matches popular systems in general. Recommended for getting started. (FUJISAWA KOSHI)
Maintenance information: 2024.7.2 operation confirmed
Accessories: No accessories
Main specifications: Playback frequency band 20 to 20,000 Hz, output voltage 5.0 mV, standard needle pressure 1.5 g, dead weight 3.5 g
Set of 6 An insulator that uses Honeynight, which Technica is proud of. The 4-layer hybrid structure is compact yet has an excellent damping effect. The base material is a luxurious machined brass. There is overall dullness. (FUJISAWA KOSHI)
Accessories: No accessories
Main specifications: Honeynight, a hybrid structure, and special anti-vibration rubber, are effectively arranged, load capacity 5 kg (1 piece), W30 x D17 mm, weight approx. 65 g/piece
This is a NAGAOKA cartridge. Equipped with a moving permalloy (MP) power generator, this cartridge has high cost performance. It has a stretchy tone and high density, so I recommend pop and jazz. There is dullness and a feeling of use. (FUJISAWA KOSHI)
Maintenance information: 2024.7.2 operation confirmed
Accessories: No accessories
Main specifications: MP type output 5 mV frequency band 20 Hz to 20,000 Hz needle pressure 2.3 g dead weight 6 g (actual measurement)
※The front cover is out of stock, so it's cheap. Maintained! This is the first full-scale solid state power amplifier sold by DENON. While the smoothness and intensity of the mid-range like the POA-1000, which was a tube type, is strongly inherited, instantaneous power unique to a solid state has been added, making it an attractive vintage amplifier. It rusts and floats, and there is a feeling of use. Serial 110075 (Fujisawa Yukishi)
Maintenance information: 2024.7.2 maintained (power transistor installation, LR power amplifier circuit section transistor, capacitor replacement, adjustment, relay replacement, power switch replacement, solder repair, internal inspection and cleaning, operation confirmation. (*When the power is turned on, the meter shakes for a moment, but it returns.)
Accessories: No accessories
Main specifications: 100W+100W (8Ω), fully equipped with 2 mono contrasts, left and right independent subsonic filters, W410 x H200 x D280 mm, weight 22 kg
Fostex semi-open RP dynamic headphones. The low frequencies are slightly subdued and have a clean tone. There is a minor peeling on the headband. *Mini-phone jack cable is not included. (FUJISAWA KOSHI)
Maintenance information: 2024.7.2 operation confirmed
Accessories: connection cord
Main specifications: frequency band 15 to 35,000 Hz sound pressure sensitivity 92 dB input impedance 50 ohms maximum input 3,000 mW 315 g
High performance CD player compatible with high resolution sound sources. Equipped with an “PCM1795” D/A converter compatible with DSD 5.6 MHz, it supports playback of music files such as DSD (2.8 MHz/5.6 MHz) files recorded on a USB memory and high-resolution sound sources up to 192 kHz/24 bit. The exterior is good with no noticeable scratches. Serial 36161201295 (Fujisawa Yukishi)
Maintenance information: 2024.7.2 operation confirmed
Accessories: remote control, copy of instruction manual, original box
Main specifications: Compatible sampling frequency 32/44.1/48/88.2/96/176.4/192 kHz (WAV) 2.8/5.6 MHz (DSD) W434 × H107 × D275 mm 4.5 kg
Full maintenance from the exterior to the unit network! It is a 2-way specification for LE14A+N1200+175DLH. In particular, the rich mid-high range of the 175DLH is impressive, and it makes me hear the playback of voices, saxophone, etc. with sexy playback sounds (Kobayashi Hitoshi)
Maintenance information: 2024.7.2 Maintained (exterior repair/polishing/oil finish
Front and rear baffle/hakama repair/paint lattice repair/polishing/painting, backing fabric replacement woofer maintenance: cone paper coating/frame polishing driver maintenance: magnetic circuit gap cleaning/center adjustment, sound absorbing material replacement, terminal cleaning/screw replacement
Network maintenance: frequency characteristic check, ATT cleaning, terminal cleaning/screw replacement)
Accessories: saran net
Main Specifications: Unit Configuration/175DLH/LE14A/N1200 Allowable Input 40W Impedance 8Ω Size W474 x H754 x D400 mm Weight 32 kg
RCA cable 0.3 m pair RCA male to 2 female specifications. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.7.1 continuity confirmed
Accessories: none