The price has been drastically reduced. 2023/7/5 sales price 2,000 yen. *Currently sold. Audio-Technica optical digital distributor. Distributes 1 input system to 4 systems. There is a feeling of use (Hiura Katsuji)
Maintenance information: 2023.7.5 sound output confirmed
Accessories: AC adapter
Main specifications: 1 OPTICAL input/4 output systems W70xD95xH32mm 154.5 g (actual measurement)
The price has been drastically reduced. 2023/6/26 sales price 2,000 yen. *Currently sold. Audio-Technica optical digital distributor. Distributes 1 input system to 4 systems. Exterior, dullness, missing rubber feet, and feeling of use (Kobayashi Hitoshi)
Maintenance information: 2023.5.13 sound output confirmed
Accessories: original box, AC adapter
Main specifications: 1 OPTICAL input/4 output systems W70xD95xH32mm 154.5 g (actual measurement)
The price has been drastically reduced. 2023/6/2 sales price 2,000 yen. ※Hand over as is. Audio-Technica optical digital distributor. Distributes 1 input system to 4 systems. Tape is wrapped around the base of the AC adapter cord and a sticker is attached (Murakoshi Yoichi)
Maintenance information: 2023.5.13 sound output confirmed
Accessories: original box, instruction manual, AC adapter
Main specifications: 1 OPTICAL input/4 output systems W70xD95xH32mm 154.5 g (actual measurement)
The optical digital cable uses a 0.7 m high-reliability metal ferrule plug and APF (all plastic fiber). How about an introduction to optical connections? The exterior is dull and has a feeling of use. (MURAKOSHI Yoichi)
Maintenance information: 2024.4.18 continuity confirmed
Accessories: none
2.0m optical cable DVD LINK series optical cable Highly efficient transmission has been achieved through round processing of terminals (Murakoshi Yoichi)
Maintenance information: 2024.5.10 continuity confirmed
Accessories: none
※There is no compatible device and it has not been checked. Audio-Technica D terminal video cable 1.3 m. There is an appearance, rubbing, and feeling of use (Kobayashi Hitoshi)
Maintenance information: Confirmation unconfirmed
Accessories: none
High output MC cartridge for mono LPs only. Plays deep sound that was not produced with stereo cartridges. It has the vividness unique to Technica, but the three-dimensional effect and intensity are an appeal unique to mono (Murakoshi Yoichi)
Maintenance information: 2024.6.2 sound output confirmed
Accessories: needle cover, original box
Main specifications: high output MC type output 1.2 mV needle pressure 2.0 g impedance 40 ohms dead weight 6.8 g
2.0m PSE standard power cable with a diameter of 11 mm with an OFC conductor held tightly with a PVC sheath. It is a cable with excellent cost performance, with rhodium plating on both the connector and plug (Murakoshi Yoichi)
Maintenance information: 2024.6.2 continuity confirmed
Accessories: none
*Currently sold. DENON's MC type cartridge boost transformer. Since it is equipped with a pass circuit, it is convenient when listening by exchanging 2 types of cartridges (MM type, MC type) with a single arm. Also, since it uses a transformer designed for the DL-103 and DL-103S, it fully demonstrates the capabilities of the models described above. You can see the exterior, dullness, rust, and feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.5.5 operation confirmed
Accessories: none
Main specifications: primary impedance 40 ohms secondary impedance 4 kΩ boost ratio 1:10 frequency band 20 to 40 kHz dimensions W51 x H53 x D181 mm weight 0.65 kg
A classic MC boost transformer. With 2 input systems, an impedance of 3.40 ohms switchable, and a PASS line, you can freely enjoy a variety of cartridges and tone arms. There is an appearance, dullness, and a feeling of use (Kobayashi Hitoshi)
Maintenance information: 2023.11.18 Operation confirmed
Accessories: none
Main specifications: MC boost transformer input, 2 systems, switchable, 1st order impedance 40 Ω, 3 Ω, switching, 2nd order impedance 4 kΩ, boost ratio 1:10, frequency characteristics, 10 Hz to 100 kHz, W97 x H65 x D155 mm, 800 g
Maintained! The thickness of the mid range and the thickness of the low range are an exciting masterpiece pre-main. The special phono part uses a transformer for built-in MC boosting. Compared to lower models, it combines the politeness of being able to enjoy classical music. Appearance, dullness, abrasions, and a feeling of use can be seen (Kobayashi Hitoshi)
Maintenance information: 2024.6.2 maintained (tone switch and other switches dismantled and polished, coated with grease (subsonic, loudness, muting, input selector, reckout), output relay, headphone relay replacement, main amplifier transistor, adjustment volume replacement, solder and board repair, balance volume replacement, each volume, switch cleaning, interior and exterior inspection cleaning, adjustment, operation confirmation)
Accessories: copy of instruction manual
Main specifications: 130W+130W (8Ω) PHONO (MM/MC) 2 systems W460 x H160 x D444 mm 18 kg
Maintained! A premain amplifier boasting high driving power, supported by a strong power supply unit typical of Sansui. The sound is soft and transparent, yet also has firm, thick bass. The sophisticated design is also attractive. There is rust on the exterior and back of the top plate, and a feeling of use such as dullness and abrasions can be seen (Kobayashi Hitoshi)
Maintenance information: 2024.6.2 maintained (output relay, headphone relay replacement, recouped wire switch due to damage, input selector, etc., switch disassembly polishing grease application (tone, loudness, subsonic, processor, power amplifier direct, source direct, tape, reckout switch), solder repair, each volume, switch cleaning, interior and exterior inspection cleaning, adjustment inspection)
Accessories: none
Main specifications: 130W+130W (8Ω) rated power consumption 330W W471 x H162 x D452 mm weight 23.5 kg
The price has been drastically reduced. 2024/6/2 sales price 278,000 yen Maintained! This α907 limited model is limited to 2000 units. A premain amplifier that stands out for its high SNR and good sound unique to MOS-FET. The fine particle feel in the mid to high range is one of the best in the history of SANSUI premain amplifiers. Coupled with the thick, energetic mid-low range, it is a famous model that has not faded its appeal even now. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.6.2 maintained (power amplifier direct, etc.) switch disassembly polishing grease application (loudness, subsonic, muting, processor, reckout, MM/MC switch, input selector, source direct, tape), output relay replacement, power amplifier section, power supply transistor, adjustment volume replacement, solder repair, volume, switch cleaning, DC, bias adjustment , running test)
Accessories: copy of instruction manual
Main specifications: 80W+80W (8Ω) MM/MC compatible MOS-FET use W466 × H166 × D453 mm 34 kg