The price has been reduced! 2024/11/19 sales price 49,800 yen Maintained! *Since there is no manufacturer, it is currently sold. Among the companies that are good at small, high-performance amplifiers, there are only larger models, and they can drive large floor-type speakers comfortably. There is an abrasion on the top plate (Tomonori Asae)
Maintenance information: 2024.11.19 Maintained (pin jack replacement due to loss of ground terminal on the pin jack part; replacement of screws on the side to prevent loss of all terminals)
Accessories: power cable
Main specifications: contactless circuit configuration, twin mono configuration, 3 RCA inputs, 1 pre-out system, 100W (8 ohms), dimensions W281 x H60 x D292 mm, weight 4 kg
The interior was thoroughly reviewed, and all selectors were dismantled, polished, and refreshed from volume! YAMAHA's heavyweight premain amplifier. The low frequency with good damping by a good power transformer and the clear sound typical of YAMAHA are attractive. The PHONO input is equipped with MC, making it a great specification for analog fans. The pre-main part can be separated, and there is potential for development into a separate part. The exterior is dull and has a feeling of use. Serial 03194 (Tomonori Asaine)
Maintenance information: 2024.11.18 Maintained (volume and switch disassembly contact polishing output relay replacement left and right main amplifiers, etc., solder correction, input/output pin jack polish, electric circuit adjustment)
Accessories: copy of instruction manual
Main specifications: 130W+130W (8Ω) 150W+150W (6Ω) PHONO (MM/MC) pre-main separable W473 x H169 x D464 mm 26 kg
The price has been drastically reduced! 2024/11/16 sale price 298,000 yen This is a special edition model with further improved quality of the L-509f. The color was changed to blaster white, and the sound quality also changed. The thick high-fidelity tone, which can be said to be the prototype of the current LUXMAN, demonstrates all-round appeal. There are scratches and bumps on the exterior. Serial M50711464A (Fujisawa Yukishi)
Maintenance information: 2024.11.16 Operation confirmed
Accessories: instruction manual, power cord, original box
Main specifications: 160W+160W (8Ω) 240W+240W (4Ω) size W467 x H179 x D435 mm weight 28.5 kg
The price has been drastically reduced! 2024/11/15 sales price 248,000 yen 2024/8 maintenance completed! Vacuum tube pre-main amplifier with a built-in authentic PHONO equalizer. Uesugi's beautiful, pleasant sound makes vocals and stringed instruments sound lustrous. It has a triode tube connection PP configuration with driving power, and there are plenty of mid to low ranges. The exterior has small scratches and a feeling of use such as dullness. Serial 021 (Tomonori Asaine)
Maintenance information: 2024.8.5 maintained (balance VR, main VR, phase reversal vacuum tube, each replacement, damaged screw replacement, screw hole correction, vacuum tube pin cleaning, foreign matter removal bias and output sound check)
Accessories: none
Main specifications: 6CA7 specification output 20W+20W PHONO (MM) input W445 × H170 × D432 mm weight 22 kg
Limited edition of 120 units sold to commemorate the 20th anniversary of Triode's establishment. The 2A3 is mounted by push-pull. In addition to the luster of the mid to high range unique to vacuum tubes, you can also clearly feel the strength of the low range. You can enjoy music sitting on your back with an output of 10W+10W or more. The exterior is also in good condition with no noticeable scratches (Oikawa Tetsuji)
Maintenance information: 2024.11.19 Operation confirmed
Accessories: power cable, instruction manual
Main specifications: 2A3 AB grade push-pull vacuum tubes, 2A3 x 4, 6SN7 x 4, rated output 10W+10W (8Ω), frequency characteristics, 10 Hz to 60 kHz, dimensions W400 x H205 x D470 mm, weight 25 kg
Arrived for the first time in 6 years! Single amplifier using a triode EL519. The clear high range, which has a unique sense of transparency, and the middle range, which is rich in nuances without turbidity, are attractive. It is an amplifier with an unrivaled personality that has a sense of power and can also express the afterglow of a spherical sound. There are small scratches and dullness on the volume and input selector knobs (Oikawa Tetsuji)
Maintenance information: 2024.11.19 Operation confirmed
Accessories: power cable
Main specifications: 14.5W+14.5W (8Ω) vacuum tube EL519×2/PCC88×2/ECC85×2 W400×H150×D400mm 20kg
Maintained! Sansui 07 series 10th anniversary model. It is a model that has achieved a wide range with CD playback in mind. It is an amplifier with sound quality that is compatible with a wide range of sources of all genres, with a strong low frequency typical of Sansui. There are dullness and small scratches appropriate to the model year (Oikawa Tetsuji)
Maintenance information: 2024.11.17 maintained (output relay replacement, selector lamp replacement, power amplifier section adjustment volume replacement, protector part transistor replacement, slide switch disassembly polishing grease application (phono selector, reck-out), push SW decomposition polishing grease application (input selector, tone, subsonic, ride ness, muting, frequency switching), master volume dismantling, cleaning adjustment, etc. Volume cleaning, interior and exterior inspection cleaning, pin jack polishing, adjustment*Relay operation takes 15 to 20 seconds)
Accessories: instruction manual
Main specifications: 130W+130W (8Ω) size W466 x H161 x D431 mm weight 21.5 kg
A popular model that plays a central role in the Lux Primain. The high-quality, soft, and comfortable sound unique to Luxe from the 90s onwards makes listening even when you listen for a long time without getting tired. Furthermore, it has a very rich input system, and since pre/power can be separated, it is excellent in terms of development. You can see a feeling of use such as appearance, dullness, small scratches, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.11.17 Operation confirmed
Accessories: remote control, instruction manual, power cord
Main specifications: 100W+100W, power consumption, 220W, line input, 4 tape systems, balance input, PHONO (MM/MC) input included, W467 x H179 x D440 mm, 21 kg
Maintained by the manufacturer! The last limited version in the S10 series. The well-built structure, which weighs 29 kg, is directly linked to the sound. It is a powerful machine that has an excellent driving feel and can easily drive even large woofers. Compared to recent modern models with a thin mid-low range, the driving power with a clear sense of energy is attractive. There is overall dullness and small scratches (Sasaki Shota)
Maintenance information: 2024.11.15 manufacturer maintained (source direct SW, input switching SW, speaker relay replacement. Amplifier board inspection, solder correction, idling adjustment, sound output test. cleaning)
Accessories: power cable
Main specifications: 100W+100W UHC single push circuit high rigidity chassis W434 × H181 × D485 mm 29 kg
This is a product that has undergone thorough maintenance, such as 50 CA10 pairs, 10 capacitors replaced, and the entire volume and lever switch dismantled and polished! Please experience not only the sound, but also the impressive volume and feel of the switch. The final model in the LUX38 series, a rare model limited to 300 units. This is the last work of Uehara Susumu, who has consistently designed the 38 series until then, and is characterized by a sense of luxury and a soft, enveloping atmosphere. There are traces of cabinet repairs, but overall it is a beautiful individual (Oikawa Tetsuji)
Maintenance information: 2024.11.13 Maintained (vacuum tube, vacuum tube socket, fuse, semi-fixed resistor, deteriorated electrolytic capacitor, tantalum capacitor, LED, spark killer, resistor replacement. All switches and volumes were completely disassembled and cleaned. Input/output waveform confirmation, rated output test (1kHz sine wave, 8Ω load: 25W+25W, OK), sound output test)
Accessories: none
Main specifications: 30W+30W (8Ω) W490 x H202 x D350 mm 24 kg
Maintained. The successor that inherited the sound of the D series. A model where you can feel the uniqueness of Sansui at the time in extruding low frequencies and making sounds. They are energetic, playable, and go great with jazz and rock, and are compatible not only with MM but also with MC, making analog fans happy. There are scratches all over the exterior (Mizusaki Ryo)
Maintenance information: 2024.11.5 maintained balance volume replacement. Main volume disassembly cleaning adjustment. Switch disassembly, polishing grease application (input selector, reck-out, tone, subsonic, muting, tape) output relay replacement. Power amplifier circuit transistor, capacitor, adjustment volume replacement. Power supply floating resistor replacement. Solder repair. Other volume cleaning ⑧ Interior and exterior inspection cleaning, adjustment, operation check.
Accessories: none
Main specifications: execution output 80W+80W (8Ω) damping factor 100 rated power consumption 200W phono MM/MC compatible W460 x H160 x D404 mm weight 13.2 kg
Maintained! An eye-catching pre-main amplifier with a beautiful modern Mackin design. It's an amplifier with an outstanding sense of transparency, yet it fully demonstrates the appeal unique to McKinn with its thick, energetic sound quality. They do a wide range of music, from classical music to rock and pop music. You can see a feeling of use, such as appearance, dullness, small scratches, etc. Serial JWA1357 (Kobayashi Hitoshi)
Maintenance information: 2024.11.7 maintenance (balance VR disassembly cleaning, meter adjustment. Check the input/output waveform and readjust the meter. Load test (1 kHz sine wave, 8 ohm load: 100W+100W, OK), sound output test) 2021.7.19 maintained (balance main VOL disassembly contact polished, oxidized/vulcanized glue applied, glass fog intake and output waveform confirmation meter readjusted load test (1 kHz sine wave at 8 Ω load: 100W+100W OK) sound output test)
Accessories: remote control (replacement), instruction manual, power cord
Main specifications: 100W+100W (8Ω) 160W+160W (4Ω) PHONO1 system (MM) RCA x 5 system, equipped with balance 1 system W445 x H194 x D475 mm 16.8 kg
The price has been reduced. 2024/5/19 sales price 49,800 yen Maintained. This is a heavyweight premain amplifier manufactured by PIONEER. Since they are only from the bubble period, large quantities of material were used, and they are highly cost-effective amplifiers. Even the smallest sounds are clearly reproduced, and the sound quality, which is both thick, shows how well crafted it was unique to that time. Overall there are small scratches, dullness, etc. (Oikawa Tetsuji)
Maintenance information: 2024.5.19 maintained (output relay replacement, master volume exchange, muting SW exchange, direct switch, etc., switch disassembly polishing grease application (input selector, recoup, loudness, tape 3, speaker switching SW), each volume, switch cleaning, interior and exterior inspection and cleaning, operation confirmation. * (Additional note) Since the master volume is a replacement, it can be adjusted in detail when the volume is low to medium volume, but when the volume is raised and auditioned, the VR seems to be raised (12:00). (*When listening to a phono, the sound will not come out unless the EQ switch is turned on)
Accessories: instruction manual
Main specifications: output 100W+100W (8Ω) 120W+120W (6Ω) 150W+150W (4Ω) power consumption 270W dimensions W420 x H162 x D435 mm weight 19.6 kg
※ The remote control is out of stock, the paint on the volume knob has peeled off a lot, and the condition is not good, so it is cheap and is currently sold. An entry model with excellent cost performance. Since it comes with a phono circuit, you can also enjoy records. The sound quality is stable in both digital and analog. The exterior has line damage on the top plate, peeling paint on the volume knob and control knob, and greening due to rust on the power plug (Ryo Mizusaki)
Maintenance information: 2024.9.14 Operation confirmed
Accessories: none
Main specifications: 50W+50W (8Ω) line input 4 phono 1 system (MM) with pre-out terminal W434 x H121 x D308 mm 7.1 kg