The price has been reduced. The 2024/4/24 sales price 298,000 yen optional phono card is not installed. In North America, CLASSE is a popular brand along with McIntosh and KRELL. Since it has straight expressiveness and driving ability, it reproduces a rich sense of sound field. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.4.19 Operation confirmed
Accessories: remote control, power cable
Main specifications: maximum output 100W x 2 (8Ω), 200W x 2 (4Ω) input unbalanced 4 systems, balance 1 system power consumption 260W (rated) W445 x H121 x D419mm 23.0 kg
The price has been drastically reduced. 2024/4/23 Selling Price 298,000 yen Tannoy's hidden popular monitor speaker. The thick MDF enclosure is coated with a special dump material to suppress resonance. Tannoy's traditional 2-way coaxial sound is attractive, but the punchy sound that is a bit different from Arden and the like is attractive. There are small scratches and dullness throughout. Written in the instruction manual (Daiki Goto)
Maintenance information: 2024.4.23 Operation confirmed
Accessories: instruction manual
Main specifications: 38cm coaxial 2-way bi-wiring compatible, 400W, 8Ω, 38Hz to 25kHz, 98dB, W550 x H840 x D440 mm, 49.6 kg
The disposal price has been reduced! (Member discounts are not applicable) 2024/3/7 sales price 398,000 yen Exterior maintenance completed! Replace network capacitors with SOLEN film capacitors. The unit is DENTECH Tune HDP385, and the enclosure is made by Shinkosha. The unit is attached by removing the back plate, and the net does not come off the front. Classical music also goes well with symphonies. The exterior is generally beautifully finished due to maintenance. Serial AYT71012 AYT71012 (Tomonori Asaine)
Maintenance information: 2024.3.7 Maintained (exterior repair/cleaning)
Rear baffle paint saran net replacement unit maintenance (exterior cleaning, low range center adjustment, screw tightening, high frequency magnetic circuit slit cleaning/center adjustment) ATT cleaning/knob adjustment unit detachment)
2015.5.14 Maintained (network capacitors replaced with SOLEN. Unit edge replacement. Magnetic circuit overhaul and operation adjustment. Saran net partial cleaning net tear repair, complementary color correction)
Accessories: none
Main specifications: used unit HPD385 frequency characteristics 20Hz to 20kHz allowable input 85W 92dB 8Ω W600 x H1075 x D380 mm approx. 42 kg/bottle
The price has been reduced! 2024/4/25 sales price 268,000 yen A state-of-the-art aircraft developed to fully draw out the potential of the 12 Series, which is the base model, and to acquire even greater musicality. The original discrete D/A converter and disk drive are equipped with the latest generation original mechanical “SACDM-3,” similar to the SA-10. The tone is more glossy and has a higher density than the previous model. There are no noticeable scratches on the exterior. Serial BNE152105700007 (Yonejima Satoshi)
Maintenance Information: 2024.4.25 Operation confirmed
Accessories: remote control, manual, power cord, connection cord, original box
Main specifications: SACD/CD player USB-DAC (PCM384 kHz/32 bit, DSD 11.2 MHz) coaxial digital x 1, optical digital x 1, headphone x 1, audio input terminal/coaxial digital x 1, optical digital x 1, USB-A x 1, USB-B x 1 W440 x H127 x D419 mm 17.1 kg
Internal and external maintenance has been applied and brushed up. The vivid sense of dynamism and the sharpness of the high frequencies typical of YAMAHA have been revived. It has a low frequency thickness that 1000 monitors don't have. It is a timeless masterpiece with a clear sense of transparency, upper and lower driving force, and the smooth connection, and the heavy exterior with an ebony finish that stands out at a glance even today. It is in good condition due to maintenance. Serial 11478L 11478R (Yamato Yuki)
Maintenance information: 2024.4.1 operation confirmed
2023.9.4 Maintained (exterior repair/polishing/clear finish. Rear baffle repair/painting. Saran net replacement. Unit frame painting. Network maintenance (Since the terminals have already been replaced with external products, adjust the direction and tighten, apply a screw fastener, and replace the mounting screws. ATT contact status check (check that there are no gaps). A frequency characteristic measurement check (~ 42 kHz) was performed, and the original capacitor was continuously used because the results were good. Input/output waveform and balance check, sound output check) Unit detachable)
Accessories: saran net
Main specifications: 3-way sealed playback frequency band 40Hz to 20kH sound pressure level 90dB rated input 50W maximum allowable input 100W impedance 8Ω crossover frequency 500Hz/6kHz dimensions W395 x H710 x D349 mm 39 kg
The disposal price has been reduced. Member prices are not applicable. 2024/4/16 sales price 298000 yen ※Brand new hinges are now in stock. An analog player representing LINN. This combination is equipped with a VALHALLA (Valhalla) power supply with the quietest and most accurate drive, and an ITTOK LV2 with firm and high rigidity on the arm! The large number of sounds unique to the LP12, the appeal of the tone, and the rich sense of scale sound quality are attractive. ※The turntable seat is not genuine. Externally, there is oxidation on bumps and weights. (FUJISAWA KOSHI)
Maintenance information: 2024.4.16 Operation confirmed
Accessories: brand new hinges
Main specifications: belt drive floating VALHALLA power supply (33 rotations only) arm/ITTOK LV2/dynamic balance type/cartridge dead weight 2 to 15 g/needle pressure range 0 to 3 g/0.1 g step dimensions W445 x H140 x D356 mm weight 10.5 kg
Maintained. This is the X-2000R, the best model in the X series. It boasts performance that surpasses the X-1000R, such as a CA (cobalt amorphous) head and a newly designed equalizer amplifier, and you can listen to damped sounds with little noise due to the DBX installation. There are stains and bumps on the exterior. Serial 20066 (Tamura Eiji)
Maintenance information: 2024.4.18 Maintained (flywheel detachable cleaning and capstan shaft cleaning oil applied, capstan belt replacement, grease applied to the foot wheel stator bearing part. Pinch roller drive mechanical disassembly cleaning and grease application, pinch roller cleaning and pinch roller shaft oil application, tape pass check. Head cleaning and head azimuth angle check adjustment. Left and right impedance roller detachment fall cleaning and oil application, left and right tension arm detachment cleaning and cushion replacement, tension sensor cleaning, and tension roller shaft cleaning oil application. Reel stand tension adjustment (FWD/REV-PLAY winding tension and tension adjustment during FF/ REW) playback and recording AMP electrolytic capacitor check and partial replacement, meter lamp, DBX display lamp replacement, replacement procedure due to deterioration of power supply protection resistance. MIC, LINE, OUTPUT volume contact cleaning Contact cleaning by detaching and disassembling the monitor SW, REC mode SW, tape bias selector SW, and DBX SW. Playback level check and adjustment, recording level and vise check and adjustment, DBX amplifier level check and adjustment, recording and playback tests are excellent. Left and right legs missing additional reference value W&F during self-recording and playback (0.02% (WTD))
Accessories: clamper
Main specifications: 4-track, 2-channel stereo format, W432 x H456 x D268 mm, 21.0 kg
The disposal price has been reduced! (Member prices are not applicable) 2024/4/13 sales price 398,000 yen For the first time in about 7 years, CM10S2 has arrived! It lets you listen to high-response sounds. In addition to simplifying the crossover with Mundorf EVO capacitors, all important internal components have been improved, such as Vandenhall internal wiring, nickel-plated terminal trays, and the driver's anti-vibration dust plug. As for the exterior, there are scratches, threads, and deterioration in part of the urethane. Serial 1508-0011895, 1508-0011896 (Fujisawa Yukishi)
Maintenance information: 2024.4.13 operation confirmed
Accessories: instruction manual, saran net, spikes, rubber feet, jumper plates
Main specifications: 3-way bass reflex type playback frequency band 28 Hz to 50 kHz output sound pressure level 90 dB nominal impedance 8 ohms W366 x H1087 x D414 mm weight 33.5 kg
Internal maintenance etc. were overhauled in 2022/6! The appeal of 38 is that it has a sharp, thick tone that cannot be heard with current audio, and is surprisingly powerful. The thick mid range and soft, rounded high range are excellent compatibility with TANNOY speakers. There are some bumps and dents on the exterior. Serial 169796 (Yonejima Satoshi)
Maintenance information: 2022.6.1 Maintained (block capacitors and some electrolytic capacitors and film capacitors have been replaced. Also, some oil capacitors and vacuum tube sockets were replaced. Each part input/output inspection, rated output test (30W+30W when connected to a 1kHz 8Ω load), sound output check performed) 2016.12.6 maintained (back VR, volume VR, RCA terminal, SP terminal, coupling capacitor, SPSW, headphone jack, 9P socket, bypass cone, DCBAL, BIAS semi-VR deterioration replacement, adjustment, SW-class O.H, characteristic check OK)
Accessories: Power cable, copy of instruction manual
Main specifications: 30W+30W (4, 8, 16 ohms) line input 4 systems phono 2 systems (mm) W476 x H190 x D335 mm 18 kg
2018 fully restored item. This model omits the MC step-up transformer. The rear speaker terminal has also been changed to one compatible with banana plugs to match modern usability. Although it is a model from the 60s, there is no sense of a faded sound, and it feels like the flat, thick lackstone has been revived energetically. The sound without getting tired even after listening to it for a long time makes me fully experience the luster and warmth of stringed instruments. There are stains all over the exterior, and there are line scratches, fading, etc. on the cabinet (Sasaki Shota)
Maintenance information: 2018.8.25 Maintained (9P socket, SP terminal, RCA terminal, block capacitor, volume/BAL/TCVR, semi-fixed resistor, coupling capacitor, AC cord, resistor replacement. Power SW contact deterioration prevention relay added. SW/VR disassembly, cleaning, solder correction. (Internal and external cleaning, circuit readjustment, waveform check, input/output check, load test, sound output test)
Accessories: copy of the manual
Main specifications: output 10W+10W input terminal AUX1 · 2 Phono 1 · 2 (mm) W470 x H175 x D275 mm weight 14 kg
The first stage is all 4 PASVANE WE310A! This is Sun Valley's Western 91 300B single amp. Anyway, it's an amplifier that clearly expresses even the afterglow, and it has enough power. Although it has an output of 8W+8W, this model is extremely practical and of high quality. It is a power amplifier with a balanced, glossy tone with no excesses or deficiencies from low to high frequencies. There is a scratch on the back of the exterior. Serial 63113 (Yonejima Satoshi)
Maintenance information: 2021.6.13 manufacturer maintained (all metal fittings on the 310A socket have been increased and tightened, looseness of vacuum tube pins and socket fittings fixed) 2020.8.7 manufacturer maintained (as preventive maintenance, hot bond treatment to prevent disconnection is performed on the 310 grid cap solder part, and residual noise, gain, frequency characteristics, and voltage of each part are measured to confirm that there are no abnormalities)
Accessories: power cable
Main specifications: output 8W+8W vacuum tube 300B ✕ 2 (Elehamo) 310A x 4 (PSVANE) 5R4GY ✕ 1 (RCA) W400 x H210 x D300 mm weight 23 kg
※ It is inexpensive because there are scratches, stains, etc. DENON's current SACD player. A state of the art machine compatible with DSD 11.2 MHz high resolution sound source with USB input. A sense of speed and characteristics typical of a modern aircraft with good resolution have been added to the conventional loose, thick sound quality. Due to the balanced output switching function, there is no problem connecting to overseas amplifiers. There are scratches and stains on the top plate, and there are many scratches and stains on the remote control (Oikawa Tetsuji)
Maintenance information: 2024.4.20 operation confirmed (CD, SACD, HDCD, PCM384k, DSD 11.2 MHz test OK, remote control OK)
Accessories: remote control, instruction manual, power cable
Main specifications: DSD11.2 MHz/PCM384 kHz 32 bit compatible, digital input terminal USB-A x 1, USB-B x 1, coaxial digital input x 1, optical digital input x 1, W434 x H137 x D404 mm 21.4 kg
The disposal price has been reduced (member prices are not applicable). 2024/2/16 sales price 378,000 yen ※The power supply part has been newly created. Other internally deteriorated parts have been restored! 2-way 100Hz specification An electric crossover coveted by Mark Levinson fans. You can see how well the early Levinson was built can be seen from the feel of the knobs that seem to make you addicted. You can listen closely to Levinson's unique sounds even on Divider. The exterior has scratches on the front top plate and other threads (Mizusaki Ryo)
Maintenance information: 2024.2.16 Maintained (*Since there is no power source, new power supply and connection cable were manufactured, noise appears in the LChLow output, transistor defects in the low pass module were replaced, re-encapsulated, readjusted due to left and right level differences, 4 volume contacts were cleaned, specs were inspected, and blocking characteristics were inspected. The crossover is 100Hz)
Accessories: Power supply unit (newly created, non-genuine), power cable, copy of instruction manual
Main specifications: 2 way (100 Hz specification) closed module type RCA Remo input/output size (main unit) W483 x H51 x D156 mm 2.8 kg size (power supply part) W101 x H101 x D256 mm 2.2 kg