Refreshment maintenance has been completed with attention to detail, such as cleaning the inside of the driver gap! The depth of the rich low frequencies of the Alnico LE14A is tight with Lanzaroi edges, and the high frequencies with a dry atrium unique to the 175DLH make you hear vintage sounds unique to the Lancer. The combination of a marble top plate and a beehive horn creates a tasteful sound that resonates a lot. Serial 13952 13958 (Murakoshi Yoichi)
Maintenance information: 2024.4.25 maintenance (exterior repair (polishing, oil finish, front and rear baffle/hakama repair, painting, backside fabric replacement) driver maintenance (magnetic circuit gap cleaning, center adjustment, sound absorbing material replacement, terminal cleaning/screw replacement) network maintenance (frequency characteristic check, ATT cleaning, terminal cleaning/screw replacement)
Accessories: saran net
Main specifications: 2 way, 2 speakers, bass reflex system, floor type, 35.5 cm cone type for low range (LE14A), high range horn type (LE175DLH), network LX10 impedance 8 ohms, W440 x H620 x D310 mm, 39.0 kg/1
Maintained by Denon Service! This model was commercialized by setting up the DA-305 on the DP-3000. The tone arm is simple and easy to handle, so it's easy to set up. The content firmly captures the basics. You can fully enjoy the goodness of analog, and this model is also recommended as an introductory machine (Sasaki Shota)
Maintenance information: 2024.4.26 manufacturer maintained (13 deteriorated TRs replaced. speed adjustment, sound output test)
Accessories: copy of the manual
Main specifications: 30cm die-cast aluminum (DP-3000) direct drive static balance S-shaped tone arm (DA-305) oil dump arm lifter needle pressure adjustment range 0 to 3 g compatible cartridge weight range 4 to 15 g W530 x H180 x D440 mm weight 10.8 kg
The price has been drastically reduced! 2024/4/17 sales price 69,800 yen ※It is cheap because it has a tobacco smell. Hi-Fi Man's planar drive headphones have a high resolution, and the low frequencies are clear and easy to listen to. The sound balance is flat and the high cushioning is also impressive. The exterior smells like tobacco and there are creases on the cable (Tamura Eiji)
Maintenance information: 2024.4.16 Operation confirmed
Accessories: original box, connection cable
Main specifications: planar drive impedance 50 ohms sound pressure sensitivity 83.5 dB playback frequency band 8 Hz to 65 kHz 505 g
Maintained by TEAC! VRDS-25 rigid menism final model. This is a popular model used by JAZZ/ROCK fans with a strong housing and a highly accurate VRDS mechanism, and has high resolution and clear contours. Spikes are attached to the solid 8 mm thick bottom plate, and the excellent construction with an excellent sense of reliability is also attractive. There is a feeling of use on the exterior such as small scratches and dullness (Asaine Tomoho)
Maintenance information: 2024.4.26 Maintained (All parts have been inspected. We have confirmed wear on the tray belt, clamp belt, and turntable bearings. Tray belt, clamp belt, and turntable bearing replacement. (Check operation by cleaning and lubricating the pickup and mechanical parts)
Accessories: Remote control instruction manual copy
Main specifications: multi-bit DAC, 25 bits, 8 times oversampling digital filter, W442 x H145 x D344 mm, weight 23 kg
Currently sold. 115V specification A power amplifier that is supported by a heavyweight power transformer and reproduces tight low frequency reproduction with good visibility. It shows high cost performance that exceeds size and price. The exterior is dull and has a feeling of use. Serial 72380SDG012 (Hiroki Aso)
Maintenance information: 2024.4.26 operation confirmed
Accessories: power cable
Main specifications: 45W+45W (8Ω) 75W+75W (4Ω) W483 × H51 × D295mm 7.5 kg
※ Tweeter soft dome has dents on the rim, so it is inexpensive. Compact Excite series speakers. There is a sense of power in the sound unique to unit development manufacturers, and the sense of scale in the low range in particular is so majestic that the compact size is unbelievably large. As the sound progresses, the transparency of the sound increases, so the fact that you can keep listening is also attractive. There is a slight feeling of use such as small scratches. Serial 03573940/03573941 (Takasaki Atsushi)
Maintenance information: 2024.4.21 sound output confirmed
Accessories: saran net
Main specifications: 2-way bass reflex type 180mm woofer 27mm tweeter 4Ω 87dB frequency band 40Hz to 23kHz W205 x H350 x D290 mm 9.0 kg
Maintenance is being carried out in 2022. A reprint of Marantz's famous model 7. In addition to the good graininess of the sound and the glossy and rich sound quality, it brilliantly inherits the good quality of the mid-range. You can enjoy a feeling that transcends ages and genres. The exterior has dullness and scratches. Serial F020306 (Murakoshi Yoichi)
Maintenance information: 2022.3.22 maintenance (implementation of measures to prevent the rear input terminal and chassis earth from floating, hot side loosening, contact pressure correction. Clean each vacuum tube pin and socket contact. (Volume VR part ground wire deviation correction, wood case stop screw installation)
Accessories: instruction manual (copy)
Main specifications: used vacuum tube 12AX7×6 W455×H178×D261mm 8kg
It is an ambitious K2 series mid-range model that inherits the characteristics of the S9500. The dynamic sound quality that makes use of the horn stands out for the strength of the sound image. The sound is lively and full of life, and the realism of the bass is outstanding. The exterior has line marks and dullness. Serial J1240-010742, J1240-010709 (Fujisawa Yukishi)
Maintenance information: 2024.4.26 operation confirmed
Accessories: saran net, jumper plate
Main specifications: 2 way 3 speakers · bass reflex system · tall boy type 30 cm cone type (LE125S) x 2 high range horn type (275Nd) frequency characteristics 35 Hz to 20,000 Hz output sound pressure level 95 dB impedance 4 Ω maximum allowable input 150 W crossover frequency 800 Hz W499 x H1,254 x D412 mm 89kg/1
※Because it smells like tobacco, it's cheap. Checked by the manufacturer! A TEAC headphone amplifier with a built-in USB DAC that condenses high-spec functions compatible with high-resolution sound sources in an A4 size compact size. The D/A converter section is equipped with Asahi Kasei Electronics' flagship model VERITA AK4497 based on 1 left and right. It is packed with various functions such as wireless playback, analog input, and external clock input. The exterior has bumps, scratches, etc. Serial 17Y0050 (Fujisawa Yukishi)
Maintenance information: Tested on 2024.4.26 TEAC including operation confirmation
Accessories: remote control, power cord
Main specifications: USB input 16 to 32 bit, 44.1 kHz to 768 kHz, DSD2.8 m to 22.5 MHz coaxial, optical digital input 16/24 bit, 32k to 192 kHz, DSD2.8 MHz (compatible with 176.4 kHz/24 bit DOP transmission) Inputs: USB B2.0, RCA, coaxial, optical x 2, coaxial 3.5mm mini, Bluetooth output: RCA, XLR, 6.3 mm standard x 2, 4.4 mm 5 poles Pentaconn W290×H84.5×D248.7mm 4.2 kg
※The tweeter is cheap because it has dents. A 3-way tall boy speaker system based on the Concerto Grand Piano. It has a glossy black body full of guests and leather that gives off a chic atmosphere, and a clean tall boy shape with a sense of luxury. The sweet, smooth tone goes great with chamber music and vocals (Murakoshi Yoichi)
Maintenance information: 2024.4.21 sound output confirmed
Accessories: spikes, saran net
Main specifications: 3 way, 3 speakers, bass reflex system, tall boy type, anti-magnetic design, frequency characteristics, 35 Hz to 20 kHz, impedance, 4 ohms, output, sound pressure level, 90 dB, W237 x H1080 x D310 mm, 25 kg/book
※It is inexpensive because there is wobble on one side. This is a speaker stand made by Dinaudio. I definitely recommend it to anyone who has a Dynaudio bookshelf type (Murakoshi Yoichi)
Accessories: none
Main specifications: top plate: approx. 235 x 190 mm base plate: approx. 300 x 245 mm height (spikes included): approx. 660 mm 12 kg
This is a rare KEF center speaker Q6C in stock. It is a well-balanced and well-organized sound character typical of the Q series. It seems to express a sufficient sense of sound field even when used in combination with Q1 for theaters. There is a bruise on the upper back corner. Serial 2027685G (Murakoshi Yoichi)
Maintenance information: 2024.4.25 sound output confirmed
Accessories: jumper plate, saran net
Main specifications: 2-way bass reflex low range/130mm Uni-Q high range/19mm Luminiumdome frequency characteristics 50Hz-27kHz crossover frequency 2.8kHz 89dB 8Ω W432xH160xD215mm 4.1 kg
The speaker cable is a conductor consisting of 350 cores in all, a 2.0m pair of end rod terminals, and is very heavy (about 2 kg per piece with only the core box part!). It has a unique presence, full of a sense of craftsmanship that cannot be found with other cables. Contrary to being rugged, the sound is detailed and smooth. As you raise the volume, you can see its true value. There are scuffs, fraying, and dirt on the sheath ※Since the core box is extremely heavy, installation requires ingenuity so that no load is applied to the cable and speaker terminals. The distance from the box to the cable terminal is approximately 15 cm. Connect the terminal side with the red seal in the middle of the sheath to the amplifier, and the terminal on the core box side to the speaker (Kojima Yosuke)
Accessories: none
Main specifications: total weight 4.8 kg
The speaker cable is a conductor consisting of 350 cores in all, a 2.0m pair of end rod terminals, and is very heavy (about 2 kg per piece with only the core box part!). It has a unique presence, full of a sense of craftsmanship that cannot be found with other cables. Contrary to being rugged, the sound is detailed and smooth. As you raise the volume, you can see its true value. There are scuffs, fraying, and dirt on the sheath ※Since the core box is extremely heavy, installation requires ingenuity so that no load is applied to the cable and speaker terminals. The distance from the box to the cable terminal is approximately 15 cm. Connect the terminal side with the red seal in the middle of the sheath to the amplifier, and the terminal on the core box side to the speaker (Kojima Yosuke)
Accessories: none
Main specifications: total weight 4.8 kg
RCA cable 1.0 m pair is a characteristic line cable that makes a careful overall sound and feels strong in the middle range of pianos, etc. The area around the plug is dull, and there are abrasions, fraying, and dirt on the sheath ※Since the core part is very heavy, installation ingenuity is necessary so as not to put a load on the plug or jack to be connected (the cable length at the end of the core box is about 15 cm) *Connect the terminal side with the red seal in the middle of the sheath to the output terminal, Connect the terminal side where the core box is located to the input terminal (Kojima Yosuke)
Accessories: none
Main specifications: total weight 1 kg
RCA cable 1.0 m pair is a characteristic line cable that makes a careful overall sound and feels strong in the middle range of pianos, etc. There is dull writing around the plug, and there are abrasions, fraying, and dirt on the sheath ※Since the core part is very heavy, installation requires ingenuity (the cable length at the tip of the core box is about 15 cm) *Connect the terminal side with the red seal in the middle of the sheath to the output terminal, and input the terminal side with the core box Please connect to the terminal (Kojima Yosuke)
Accessories: none
Main specifications: total weight 1 kg
RCA cable 1.0 m pair is a characteristic line cable that makes a careful overall sound and feels strong in the middle range of pianos, etc. The area around the plug is dull, and there are abrasions, fraying, and dirt on the sheath ※Since the core part is very heavy, installation ingenuity is necessary so as not to put a load on the plug or jack to be connected (the cable length at the end of the core box is about 15 cm) *Connect the terminal side with the red seal in the middle of the sheath to the output terminal, Connect the terminal side where the core box is located to the input terminal (Kojima Yosuke)
Accessories: none
Main specifications: total weight 1 kg
G-shell oval needle model from the Herman era. The glossy, rich, and heavy sound is an appeal that never fades. It is an eternal cartridge that fully conveys the appeal of analog (Yasuhito Koshihama)
Maintenance information: 2024.4.25 storefront operation confirmed
Accessories: original box
Main specifications: G shell oval needle MC type output 0.2 mV needle pressure 3 to 4.5 g internal impedance 2 ohms dead weight 31 g
The price has been drastically reduced. 2024/4/23 Selling Price 298,000 yen Tannoy's hidden popular monitor speaker. The thick MDF enclosure is coated with a special dump material to suppress resonance. Tannoy's traditional 2-way coaxial sound is attractive, but the punchy sound that is a bit different from Arden and the like is attractive. There are small scratches and dullness throughout. Written in the instruction manual (Daiki Goto)
Maintenance information: 2024.4.23 Operation confirmed
Accessories: instruction manual
Main specifications: 38cm coaxial 2-way bi-wiring compatible, 400W, 8Ω, 38Hz to 25kHz, 98dB, W550 x H840 x D440 mm, 49.6 kg
The price has been reduced! 2024/4/25 sales price 1,280,000 yen An analog player produced by SME, a prestigious tonearm company. Vibrations are suppressed with a unique isolation system and high-quality aluminum, and stable sound reproduction is achieved with an elaborate set of parts unique to SME. The arm is equipped with a specially designed 309, so you can enjoy rich and stable analog sound. Serial 0105 (Tamura Eiji)
Maintenance Information: 2024.4.25 Operation confirmed
Accessories: instruction manual, connection cable, power cable, stabilizer, tool, original box
Main specifications: Compatible speed: 33, 45, 78 rpm Main unit: W370 x H170 x D350 mm Power supply unit: W170 x H68 x D305 mm Weight: 25.9 kg
The price has been reduced! 2024/4/19 sales price 79,800 yen ※1 unit only. Maintained! It is originally a professional mono amplifier, but there is only 1 unit. You can feel the strong power of the sound quality even with just one unit. It seems to be useful for mono and center speakers. There are scratches and paint peeling on the exterior. Serial Q001769 (Fujisawa Yukishi)
Maintenance information: 2024.4.19 Maintained (XLR speaker cable created (3 meters)). Electrolytic capacitor replacement. ATT cleaning. Solder correction. Rubber feet added. Bias offset check. Output audio check. Input ① GND ② HOT ③ GND (unbalanced) output ① not used ② is set to plus ③ minus 8 Ω load. (Also, a pop sound is made when the power is on and off, but this is a specification)
Accessories: speaker cable, power cable
Main specifications: 8 ohms W482.6 x H88 x D320 mm weight 13 kg
The price has been reduced! 2024/4/25 sales price 498,000 yen KLIMAX DSM/1 is a model created through a DSM/2 upgrade service. It is a car where you can fully enjoy the “KLIMAX” quality while keeping the simple structure typical of LINN. There are no noticeable scratches on the exterior. Serial 1427895 (Tamura Eiji)
Maintenance information: 2024.4.25 Maintained (removal of residual parts damaged in the output jack. RCA jack L R both replaced (made by WBT). Ver (4.104.518))
Accessories: power cable
Main Specifications: Support Files: FLAC, WAV, ALAC, AIFF, AAC, MP3, WMA Compatible Sampling Frequency: 44.1 to 192 kHz Compatible Bits: 16-24 Bits W381 x H80 x D280 mm Weight 2.7 kg
※Since it is cheap, it will be handed over as is. An attractive subwoofer with a tight, speedy bass range based on time domain theory. The sound that emits 360 degrees is a convenient item with a high degree of freedom of installation. There are scratches on the exterior. Serial Z0C00005 (Tamura Eiji)
Maintenance information: 2024.4.24 sweep test good
Accessories: instruction manual, power cable, original box
Main specifications: 16 cm subwoofer 16 cm (dual voice coil unit) playback frequency band 40 Hz to 200 Hz rated output 30 W x 2 crossover 40 Hz to 200 Hz (continuously variable) power consumption 46 W size W236 x H354 x D301 mm mass 16.2 kg
RCA cable, 1.0 m pair, 6N-7N hybrid conductor, twin core structure, thick and strong mid-range, this hidden name cable is recommended for vintage audio. There is dirt on the sheath (Tamura Eiji)
Maintenance information: 2024.4.24 continuity confirmed
Accessories: No accessories
The price has been drastically reduced! 2024/4/24 sales price 118,000 yen*Saran net is out of stock, scratches, etc.
It's cheap because it's not in good condition. ATC small bookshelf. The thick and powerful mid-low range is attractive. If you pair it with a good amplifier that has torque, you can enjoy it on a scale that greatly exceeds its size. There are scratches on the exterior. Serial 0819/0820 (Tamura Eiji)
Maintenance information: 2024.4.24 sweep test good
Accessories: No accessories
Main specifications: 2 way 2 speakers sealed impedance 8 ohms size W211 x H380 x D250 mm weight 11.4 kg
The disposal price has been reduced! (Member prices are not applicable) 2024/4/22 sales price 148,000 yen Maintained! A driver unit suitable for sound reproduction for large halls and theaters, modeled after the standard 2-inch 375. High frequency characteristics have been enhanced while retaining a vintage feel. The cymbals play a sound that makes you think of jazz. The paint is peeling off. Serial 32769, 32799 (Fujisawa Yukishi)
Maintenance information: 2024.4.22 maintained (diaphragm installation adjustment, pad dampener replacement)
Accessories: No accessories
Main specifications: frequency characteristics, 500 to 18 kHz, crossover, 500 Hz, 16 ohms, diameter: 175 mm, height: 145 mm, approx. 11.8 kg/bottle
The disposal price has been reduced! (Member discounts are not applicable) 2024/4/20 sales price 198,000 yen ※It is cheap because there is dirt, cigarette smell, and part of the stay is broken. Comes with stand 2505! 2 inch horn+ lens with huge slant plate. As nicknamed “Ghost Horn,” it has the size and presence. The sound of an exponential horn with an elliptical aperture creates a natural sound that is not very peculiar. The exterior has line scratches and paint peeling. Serial 17862, 18641 (Fujisawa Yukishi)
Accessories: stand
Main specifications: crossover frequency 800 Hz, throat diameter 50 mm, W914 x H305 x D483 mm, weight 10.5 kg (stand not included)
The price has been reduced. 2024/4/8 sales price 19,800 yen The company's senior center speaker. A diaphragm using Kevlar fiber, which has the characteristics of being lightweight and highly rigid, is used for the woofer and mid, and a tweeter capable of reproducing up to 50 kHz with unique technology is used. The highly rigid cabinet clearly reproduces vocal bands without damaging the low frequencies. There is a line scratch on the top plate (Kojima Yosuke)
Accessories: saran net
Main specifications: coaxial 2-way +2 woofer 6Ω 90dB crossover frequency 420Hz/3.2kHz W654 × H230 × D338 mm 22.2 kg
An original needle! This is Type 4 of the classic V15 series. The impression is that sharper resolution and a sense of dynamism have been added than Type 3. The tracing ability is extremely high, and it picks up the sound engraved in the sound groove without omission (Oikawa Tetsuji)
Maintenance information: 2024.3.31 operation confirmed
Accessories: none
Main specifications: mm type output voltage 4 mV needle pressure 0.75 to 1.25 g internal impedance 47 kΩ dead weight 7 g
The price has been reduced! 2024/4/21 sales price 99,800 yen This is DALI's HELICON series center speaker. If you use the company's HELICON series and are considering surround, please give it a try. The exterior is dull. Serial 7660180 (Fujisawa Yukishi)
Maintenance information: 2024.4.21 operation confirmed
Accessories: original box, saran net
Main specifications: 4Ω playback frequency band 49Hz to 27kHz W650 ✕ H210 ✕ D435mm weight 18.4 kg
The price has been reduced! 2024/4/23 sales price 65,000 yen caster specification! TAOC theater youth HT series wide rack. It also has sufficient load carrying capacity, so even those with large devices can use it without worry. Other than one scratch on the pillar, the condition is pretty good. *Shipping costs will be estimated separately. (FUJISAWA KOSHI)
Accessories: instruction manual, felt, logo seal, hex wrench
Main specifications: load capacity 200 kg/1 shelf spacing 180/230 mm W1,680 x H590 x D550 mm weight 65 kg
The price has been reduced! 2024/4/25 sales price 998,000 yen SME's current record player has arrived! Similar to the “Model 12A,” it uses a new-generation advanced electronic speed control unit, and detailed speed control is possible. The arm is equipped with the “M2-9R,” which can be said to be the successor to the “3009,” and is compatible with a wide range of cartridges. Please enjoy the one that represents this class. Serial 0075 (Tamura Eiji)
Maintenance Information: 2024.4.25 Operation confirmed
Accessories: instruction manual (English), belt, power cable, connection cable, original box, IFC weight, stabilizer, head shell
Main specifications: main unit: W420 x H90 x D320 mm Power supply unit: W220 x H85 x D200 mm Weight: 11.4 kg including power supply
The price has been reduced! 2024/4/18 sales price 59,800 yen ※Since it is a commercial device, it will be handed over as is. It's a very powerful sound unique to professional machines, and it pushes the sound forward and forward. Recommended for jazz and rock fans with large woofers. The exterior has scratches, bumps, etc. Serial JP01026 (Tamura Eiji)
Maintenance information: 2024.4.18 Operation confirmed
Accessories: none
Main specifications: 240W+240W (8Ω) 480W (16Ω MONO) with peak output meter W480 × D413 × H183 mm 20.5 kg
The price has been drastically reduced! 2024/3/28 sales price 398,000 yen Electric has been maintained, including replacing a new windshield panel! A pre-main amplifier with a built-in McIntosh traditional output transformer. You can enjoy the rich and rich sound world typical of Macintosh. This is one that combines the appeal of the sounds of modern and old McKinn. The sense of power that makes you feel the strength is similar to that of a separate amplifier. The exterior is dull. Serial JLF1440 (Fujisawa Yukishi)
Maintenance information: 2024.4.24 Manufacturer maintained (various solder fixes on the driver board. windshield panel replacement Switch bezel fixing O ring replacement IC exchange. Capacitors were replaced at various other locations. Filter capacitor replacement. Other relays, transistors, etc. have been replaced, but please note that the pop noise of this unit is difficult to completely remove due to product specifications, so it can be heard slightly depending on when the power is turned on. Replace all front lamps. Lamp fixing grommet replacement There is a difference in meter runout when the volume is low, but when the output is raised by about 3/4, the difference is not very noticeable. Due to specifications due to individual differences in parts, improvements are difficult, so adjustments were made so that they fit at a position of approximately half a meter. Same confirmation and other inspections. *The VOL position is 05, which is the normal level of around 9 o'clock, but this is a specification. (If you are concerned, lower the CD level.)
Accessories: remote control, instruction manual
Main specifications: 150W+150W (8/4/2Ω) phono input MM dimensions W445 x H179 x D508 mm weight 30 kg
*Both the main body and ottoman are inexpensive because the leather is torn and leaves a feeling of use. Ottoman with optional swing table Scandinavian design stressless chair. It is the best recliner that reclines naturally by simply putting weight on the backrest, and lifts up the backrest at the same time as the body is raised ※Shipping is estimated separately. In addition to the exterior, as described above, a feeling of use can be seen, such as dullness, threads, etc. (Kobayashi Hitoshi)
Accessories: none
Main specifications: W75×H96-106×D75mm ottoman W55×H40×D41mm
The price has been reduced! 2024/4/22 sales price 36,800 yen Quad bookshelf type speaker with a mirror finish that exudes a sense of luxury. It has wide bandwidth and cuts while retaining shadows unique to European speakers, and plays jazz and rock with rich musicality. The exterior has a feeling of use over time, such as dullness and scratches. ※This is a general-purpose jumper cable (Hiroki Aso)
Maintenance information: 2024.4.22 sound output checked (good sweep test)
Accessories: Saran net jumper cable (general purpose)
Main specifications: 2 way rear W bass reflex bookshelf type 6Ω 86db frequency characteristics 45 to 43 kHz W190 x H330 x D265 mm 6.0 kg
The disposal price has been reduced! (Member discounts are not applicable) 2024/3/10 sales price 69,800 yen Maintained! A stereo premain amplifier developed by inheriting CA-1000 technology. It is an amplifier that can evaluate pure sound quality without habit. The straight tone and glossy high frequencies give an impression. Even though it's an old model, it doesn't feel that the range is narrow, and it goes perfectly with rock, jazz, drums, and wind music. The exterior is dull, scratched, etc. (Tamai Jun)
Maintenance information: 2024.3.10 Maintained (speaker terminal replacement, power cord replacement, power supply circuit, tone control circuit, main amplifier circuit, etc., deterioration resistance and transistor exchange switch and volume contacts disassembly polishing input/output pin jack polishing*The circuit is not stable immediately after turning on the power supply, so when the filter or tone switch is switched, it makes a crackling sound. (If you wait a little while, it won't bother you)
Accessories: none
Main specifications: output 45W+45W (8Ω, Class B operation) 10W+10W (8Ω, Class A operation) 20Hz-20kHz power consumption rating 190W maximum 300W external dimensions 436 x H144 x D323 mm weight 13.5 kg
The disposal price has been reduced. Member prices are not applicable. 2024.3.28 Sales price 278,000 yen First arrival! This speaker system is the highest-end model in the reference series announced on the 25th anniversary of KEF. The expansive spatial expression and fresh, glossy sound are attractive. It seems that the previous owner replaced the woofer edge with chamois leather, so durability is also safe. *The equalizer KUBE is included, but operation has not been confirmed due to 220V specifications. Even without an equalizer, it can be used as a normal speaker without any problems. Jumper cables are replacements (Oikawa Tetsuji)
Maintenance information: 2024.3.28 Operation confirmed
Accessories: dedicated equalizer KUBE 107/2
Main specifications: 3 way 4 speakers 4 ohms 90 dB W330 x H1170 x D475 mm 45.8 kg
The price has been reduced. 2024/4/25 sales price 698,000 yen Manufacturer maintenance including all output tube replacements in 2020! McKinn's tube power amplifier. While it has a smooth and glossy tone, the delicate tone with an extremely high sense of SNR is truly a modern vacuum tube amplifier. The modern McKinn sound, which has no conventional noise and is highly transparent yet thick and glossy, is attractive. The meter is cloudy and burnt (Oikawa Tetsuji)
Maintenance information: 2020.4.14 Electric maintenance completed (vacuum tube pre-replacement, front lamp replacement, on main PCB, various resistors, diode replacement, capacitor replacement, bias adjustment, operation inspection)
Accessories: instruction manual, power cable, original box
Main specifications: KT88 parallel push stereo 100W mono 200W with balanced input W445 x H257 x D432 mm weight 40 kg
The price has been reduced. 2024/4/25 sales price 278,000 yen Maintained! A stereo power amplifier limited to 200 units. The careful, natural, and delicate sound that can be heard for a long time, backed by artistic internal wiring, is the true essence of Wesugi amplifiers. Modern speakers also drive quietly and firmly (Yasuhito Koshihama)
Maintenance information: 2024.4.25 Maintained (*confirmed above, lots of dust and dirt* input volume replacement, solder correction, misalignment correction, vacuum tube pin cleaning mold, dirt cleaning, foreign matter removal, bottom plate mounting reversed* bias check output audio check (output approx. 40W confirmed)
Accessories: none
Main specifications: 40W+40W vacuum tube ECC83 x 1 ECC82 x 2 EL34 x 4 W365 x H232 x D310 mm 31 kg
The price has been reduced! 2024/4/25 Sales price 198,000 yen Maintained by the manufacturer! Tubular premain amplifier equipped with 300B. In addition to combining a vacuum tube with a modern design, it is easy to use with easy bias adjustment. Since it can also be used as a power amplifier using the PRE-IN terminal, it is also recommended for those considering separating them in the future. Serial 05050050 (Hiroki Aso)
Maintenance information: 2024.4.25 Maintained (maintenance including restoration of the contact point of the selector polishing volume ※ vacuum tubes can still be used, but they have deteriorated appropriately over time, so please understand that this is a current product)
Accessories: power cable
Main specifications: maximum output 18W+18W (8Ω) vacuum tube 300B/A grade push-pull input terminal input RCA4 system
(4 rear systems, 1 tape out system) output terminals 6/8/16 ohm, 1 system each, TRIODE original 300B power consumption 220W size 440 x depth 320 x height 200 mm weight 20 kg
The price has been drastically reduced. 2024/4/24 sales price 248,000 yen with dedicated stand DK-205! A masterpiece of Diatone. The DS-205, which makes you feel the design of yesteryear, has arrived! The small aperture woofer is played in a large capacity enclosure, and the deep sound, which also has a soft, puffy texture, is attractive. It is a gem that is highly appreciated by music fans. Compared to the R305, etc., it is one size smaller and easier to handle. There are repair marks on the side molding, front of the stand, etc., and dents and abrasions are scattered (Kanai Hidetsugu)
Maintenance information: 2024.4.24 sound output confirmed
Accessories: dedicated stand, saran net, jumper cable (replacement)
Main specifications: 2-way 2-speaker bass reflex output sound pressure level 88dB impedance 4Ω anti-magnetic design size W482 x H700 x D362 mm weight 26 kg stand H450 x H230 x D351 mm weight 9 kg
Maintenance is being carried out in 2020. It's a famous machine you can't miss when talking about Marantz sounds of yesteryear. It has a good mid-range fat transfer, and its pleasant tonal feel is an appeal that cannot be obtained anywhere else. You can enjoy the Marantz sounds of the good times. There is some rust and small scratches on the exterior. Serial 8-4160 (Murakoshi Yoichi)
Maintenance information: 2020.11.18 maintained (AC code deterioration exchange, 40/40/20 μF and other deterioration replacement, 3 external paint, 20 μF x 2 deterioration exchange, selenium deterioration countermeasures → diode addition · vacuum tube 6BH6 noise exchange · vacuum tube socket and RCA jack caulking repair ※ other operation checked (measured at 32 to 41 W SP: 8 Ω with rated output AC 100 to 117 V) *A2 The EL34 vacuum tube guide pin is broken, but there is no problem with performance. (Part of the SP terminal on the right channel is missing.)
Accessories: instruction manual (for replicas, Japanese copy)
Main specifications: 35W+35W vacuum tube 6CG7/6BH6/EL34 W348 × H191 × D273mm 22.5 kg
High output MC cartridge for mono LPs only. Plays deep sound that was not produced with stereo cartridges. It has the vividness unique to Technica, but the three-dimensional effect and intensity are an appeal unique to mono (Oikawa Tetsuji)
Maintenance Information: 2024.4.25 Operation confirmed
Accessories: needle cover
Main specifications: high output MC type output 1.2 mV needle pressure 2.0 g impedance 40 ohms dead weight 6.8 g
This standard cartridge is particularly famous in the company's MC series. It has good stretch in the high range and a texture that feels good against the skin, has thickness and density in the mid-range, and it is a tone that makes you feel a sense of temperature (Oikawa Tetsuji)
Maintenance Information: 2024.4.25 Operation confirmed
Accessories: none
Main specifications: MC type output voltage 0.09 mV needle pressure 1.7 g playback frequency band 20 to 20,000 Hz load resistance 10 ohms internal impedance 3 ohms dead weight 7 g
original needle. It combines the delicate expressive power unique to light needle pressure with an energetic, thick sound typical of Type 3. Recommended for those who listen to jazz and rock (Oikawa Tetsuji)
Maintenance Information: 2024.4.25 Operation confirmed
Accessories: none
Main specifications: mm type frequency range 10 Hz to 25,000 Hz output voltage 3.5 mV needle pressure 0.75 g to 1.25 g weight 6 g
original needle. It combines the delicate expressive power unique to light needle pressure with an energetic, thick sound typical of Type 3. Recommended for those who listen to jazz and rock (Sasaki Shota)
Maintenance information: 2024.4.25 Sound output operation confirmed
Accessories: none
Main specifications: mm type frequency range 10 Hz to 25,000 Hz output voltage 3.5 mV needle pressure 0.75 g to 1.25 g weight 6 g
Comes with original box SPU synergy with the highest output in the SPU lineup. Using a G-shell containing neodymium magnets and zinc powder, it combines a modern, energetic sound with a rich sound typical of an orthophone. The stylus is good (Sasaki Shota)
Maintenance information: 2024.4.25 Sound output operation confirmed
Accessories: original box
Main specifications: MC type output voltage 0.5 mV diamond oval needle frequency characteristics 20 to 20,000 Hz needle pressure 3 g dead weight 30 g
This model commemorates the 250th anniversary of J.S. Bach's death. Uses a 6N silver wire coil. It is a cartridge that excels in even more delicate spatial expression while retaining the feel of an orthophone. The know-how of the masterpiece Jupiter has been fully introduced, and the high cost performance stands out. The cantilever is slightly to the right, and there is a small scratch and dullness on the body (Sasaki Shota)
Maintenance information: 2024.4.25 Sound output operation confirmed
Accessories: nothing
Main specifications: output voltage 0.45 mV frequency characteristics 20 Hz to 35 kHz internal resistance value 5 ohms, suitable elliptical needle pressure 2.5 g, dead weight 10 g
※Since the cantilever is slightly raised, it is inexpensive. Mid-range models in the MC Star series, which come in 3 types. Both models have different sounds, and they are all unique, but 20W is a model that places particular emphasis on the mid-range. The sound is warm in tone, and has an extrusive, and comfortable sound that goes through the SPU. The wooden body made of Yamanaka lacquer, which is a traditional Japanese craft, is also beautiful.
Maintenance Information: 2024.4.25 Operation confirmed
Accessories: none
Main specifications: MC type output voltage 0.5 mV suitable needle pressure 2.3 g recommended load impedance 10 to 200 ohms dead weight 10.5 g