Sony ND-14G equivalent. Replacement needle for VL-14GS (2) It is unopened and operation has not been checked (Kobayashi Hitoshi)
Accessories: original box
Equivalent to PIONEER PN-330M/2 PC-330/2 replacement needle It is unopened and operation has not been checked (Hiura Katsutsugu)
Maintenance information: operation unconfirmed
Accessories: original box
Replacement needle for Hitachi DS-ST35 It is unopened and operation has not been checked (Hiura Katsutsugu)
Maintenance information: operation unconfirmed
Accessories: original box
Replacement needle for Hitachi DS-ST35 It is unopened and operation has not been checked (Hiura Katsutsugu)
Maintenance information: operation unconfirmed
Accessories: original box
PIONEER PL-N9 compatible equivalent Replacement needle for PL-C9 It is unopened and operation has not been checked (Hiura Katsutsugu)
Accessories: original box
SONY ND-200G equivalent Replacement needle for XL-20G It has not been opened and the operation has not been checked (Kobayashi Hitoshi)
Maintenance information: operation unconfirmed
Accessories: original box
Sony ND-138G equivalent Replacement needle for VL-38G. It is unopened and operation has not been checked (Hiura Katsutsugu)
Maintenance information: operation unconfirmed
Accessories: none
Victor DT-27 0.5mm SUPER DX equivalent Replacement needle for MD-1012Z It is unopened and operation has not been checked (Hiura Katsutsugu)
Accessories: original box
Equivalent to Victor ST-56. Replacement needle for MD-1056Z It is unopened and operation has not been checked (Hiura Katsutsugu)
Accessories: original box
Equivalent to Victor ST-56. Replacement needle for MD-1056Z It is unopened and operation has not been checked (Hiura Katsutsugu)
Accessories: original box
Equivalent to Victor ST-56. Replacement needle for MD-1056Z It is unopened and operation has not been checked (Hiura Katsutsugu)
Accessories: original box
Equivalent to PIONEER PN-330M/2 PC-330/2 replacement needle It is unopened and operation has not been checked (Hiura Katsutsugu)
Maintenance information: operation unconfirmed
Accessories: original box
Equivalent to PIONEER PN-330M/2 PC-330/2 replacement needle It is unopened and operation has not been checked (Hiura Katsutsugu)
Maintenance information: operation unconfirmed
Accessories: original box
Equivalent to PIONEER PN-330M/2 PC-330/2 replacement needle It is unopened and operation has not been checked (Hiura Katsutsugu)
Accessories: original box
Sony ND-131G equivalent VM-1200G replacement needle It is unopened and operation has not been checked (Hiura Katsutsugu)
Maintenance information: operation unconfirmed
Accessories: original box
Replacement needle for XL-25 (A), equivalent to SONY ND-25E. It is unopened and operation has not been checked (Murakoshi Yoichi)
Maintenance information: operation unconfirmed
Accessories: original box
Replacement needle for XL-25 (A), equivalent to SONY ND-25E. It is unopened and operation has not been checked (Murakoshi Yoichi)
Maintenance information: operation unconfirmed
Accessories: original box
Sony ND-150G equivalent. XL-150G replacement needle It is unopened and operation has not been checked (Hiura Katsutsugu)
Maintenance information: operation unconfirmed
Accessories: original box
SONY ND-200G equivalent Replacement needle for XL-20G It has not been opened and the operation has not been checked (Kobayashi Hitoshi)
Maintenance Information: Unopened
Accessories: original box
Victor DT-41 equivalent. Replacement needle for MD-1041Z It is unopened and operation has not been checked (Hiura Katsutsugu)
Accessories: original box
Victor DT-25H equivalent. Replacement needle for EG-82476 and MD-1011Z. It is unopened and operation has not been checked (Hiura Katsutsugu)
Accessories: original box
Victor DT-25H equivalent. Replacement needle for EG-82476 and MD-1011Z. It is unopened and operation has not been checked (Hiura Katsutsugu)
Accessories: original box
Victor DT-25H equivalent. Replacement needle for EG-82476 and MD-1011Z. It is unopened and operation has not been checked (Hiura Katsutsugu)
Accessories: original box
Equivalent to the HITACHI DS-ST55. Replacement needle for MT-55 It is unopened and operation has not been checked (Hiura Katsutsugu)
Accessories: original box
Equivalent to Hitachi DS-ST26 Replacement needles for VFS-260 and VFS-261. It is unopened and operation has not been checked (Hiura Katsutsugu)
Accessories: original box
Victor DT-41 equivalent. Replacement needle for MD-1041Z It is unopened and operation has not been checked (Hiura Katsutsugu)
Accessories: original box
Speaker cable 2.0m pair High quality speaker cable using PC Triple C conductors. There is dullness and a feeling of use (Kanai Hidetsugu)
Maintenance information: 2024.5.3 continuity confirmed
Accessories: none
Full maintenance from capacitor replacement to re-soldering of each board, etc.! The first memorable luxury model in the Sansui 07 series in the era when there was no 907. Starting with the newly developed dual FET at the time, the company's consistent commitment to adopting quadruple detent volumes and large electric power transformers independently on the left and right has already been established. Compared to models from the 80s and 90s, the sense of fulfillment in the phono section is amazing. There is a feeling of use due to appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.4.16 Maintained (capacitor, semi-fixed resistor, transistor, resistor, protection relay SP terminal, heat dissipation sheet replacement. SW type terminal cleaning, contact grease coating. Re-solder flux cleaning for each board. Each circuit adjustment, RCA terminals, interior and exterior cleaning. (Various tests)
Accessories: copy of instruction manual
Main specifications: 85W+85W W430 x H168 x D389 mm 16.8 kg
Maintained! A pre-main amplifier that inherits the sound of the D series and has achieved even lower distortion. A model where you can feel the uniqueness of Sansui at the time in the extrusion of low frequencies and sound creation. It's energetic, playable, and goes great with jazz and rock, and is compatible not only with MMs but also with MC, making it great for analog fans. There is a feeling of use such as dullness, abrasions, corrosion, dirt, etc. (Kobayashi Hitoshi)
Maintenance information: 2023.11.21 Maintained (balance, main volume, output relay, power supply floating resistor, Mylar capacitor, equalizer section op amp replaced. Input selector and other rec outs, tone, subsonic, and muting switches are disassembled and polished grease is applied. (Each volume, switch cleaning, solder repair, interior and exterior inspection and cleaning, adjustment inspection.)
Accessories: copy of the instruction manual
Main specifications: 75W+75W (8Ω) PHONO (MM/MC) W445 x H163 x D403 mm 12.4 kg
※It is cheap because it is in poor condition. We will sell it as is. A memorable speaker released as the first release by Sansui. The mid to high frequencies are sharp, and the low frequencies also play a firm and well-balanced tone. This is a speaker I'd like to play with Old Sansui's AU-777 etc. In addition to the exterior, dirt on the woofer cone paper, cracks on the baffle surface around the TW, and cracks on the inside of the saran net on one side, a feeling of use can be seen due to defective parts of the SP terminal, dullness, scuffs, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.5.7 operation confirmed
Accessories: none
Main specifications: W360 x H624D x 306 mm 16.85 kg
SANYO/OTTO ST-7D stylus It appears to be unused. Operation has not been confirmed since there is no main unit (Murakoshi Yoichi)
Maintenance Information: Operation Unconfirmed
Accessories: original box
SANYO/OTTO ST-7D stylus It appears to be unused. Operation has not been confirmed since there is no main unit (Murakoshi Yoichi)
Maintenance Information: Operation Unconfirmed
Accessories: original box
OTTO ST-7D stylus For MG8, MGT-2, and MGT42K It seems unused, but it's junk because the needle hasn't come out of the body due to deterioration of the damper. Please use it as a parts remover. There is dullness on the exterior ※ member prices are not applicable and there is no guarantee for junk items, and they are sold as is (Kobayashi Hitoshi)
Maintenance information: Operation unconfirmed (the cantilever has sunk due to damper deterioration. (As for junk items, they will be handed over as is.)
Accessories: original box
SANYO/OTTO ST-7D stylus It appears to be unused. Operation has not been confirmed since there is no main unit (Murakoshi Yoichi)
Maintenance Information: Operation Unconfirmed
Accessories: original box
OTTO ST-4D stylus It appears to be unused. Operation has not been confirmed since there is no main unit (Murakoshi Yoichi)
Maintenance Information: Operation Unconfirmed
Accessories: original box
The price has been reduced. 2024/4/15 sales price 35,000 yen It is a high-end masterpiece that has been loved by Sennheiser for a long time. As a studio monitor, it demonstrates its power without regret. It expresses delicate sound and clear space, and provides both vocals and performances with high resolution. There is a slight feeling of use on the earpads (Kanai Hidetsugu)
Maintenance information: 2024.4.15 sound output confirmed
Accessories: original box, instruction manual, cable
Main specifications: dynamic open air, 300 ohms, 103 dB, playback frequency band 10 to 39,500 Hz, cable length: 3.0 m, mass: approx. 260 g
Shure's final high-end cartridge model. It has a smooth sound that is different from the thick, jazz-friendly series, and vocals and classical music are carefully reproduced. There is a slight feeling of use (Takasaki Atsushi)
Maintenance information: 2024.3.7 sound output confirmed
Accessories: none
Main specifications: mm type oval needle frequency band 20 Hz to 22 kHz needle pressure 0.75 to 1.5 g (appropriate 1.25 g) dead weight 7 g