Comes with an acrylic cover. A cartridge keeper that can hold 6 cartridge shells. The clearance is large and easy to handle. There are scratches and dirt on the exterior (Yonejima Satoshi)
Accessories: No accessories
Main specifications: W200 x H107 x D100 mm weight 450 g (actual measurement)
*Due to poor LOW volume, the specification has been changed so that only the low frequencies come out at full throttle. Other volumes can be used as normal. A pretty rare Yamaha channel divider. An electronic crossover network equipped with continuously variable crossover frequency, a 3-stage slope selector, and a Q control circuit. For 2 to 3 ways. The exterior has small scratches and dullness (Oikawa Tetsuji)
Maintenance information: 2024.4.24 Maintained (switches and volume contact repairs, LOW volume has passed circuitwise because parts cannot be obtained)
Accessories: none
Main specifications: crossover frequency Low-Mid: 50 Hz, 100 Hz, 200 Hz, 400 Hz, 800 Hz Mid-High: 800 Hz, 1.6 kHz, 3.2 kHz, 6.4 kHz, 12.8 kHz Low-Mid: 35 Hz to 1.13 kHz continuously adjustable by crossover fine adjustment knob, Mid-High: 565 Hz to 18.1 kHz continuously variable W435 × H72 × D349 mm 7.5 kg
The disposal price has been reduced! Member discounts are not applicable. 2024/4/18 sales price 40,000 yen*Currently sold. Comes with a remote control. Subwoofer system with built-in power amplifier using Yamaha's unique YST system. The deep bass is thick and has a sense of volume, and is excellent for reproducing movies and live sound sources. It is a heavy structure using the same wood as GT racks. There is a feeling of use on the exterior due to scratches, dullness, paint peeling, etc. Serial 101034 (Tomonori Asaine)
Maintenance information: 2024.4.18 Operation confirmed
Accessories: remote control instruction manual
Main specifications: floor-type anti-magnetic design amplifier output 120W cutoff frequency 30Hz to 130Hz power consumption 100W dimensions W580 x H440 x D440 mm weight 48 kg
※ Sub weight is missing. A long-selling player that Technics is proud of. It boasts a simple design that is easy to use, stable operation, and durability. Clear contours, high earthquake resistance, highly accurate tone arms, etc., all of these are attractive cars with a degree of perfection that exceeds the price. Exterior, slight small scratches, abrasions, etc. can be seen (Murakoshi Yoichi)
Maintenance information: 2024.4.17 sound output confirmed
Accessories: dust cover
Main specifications: Quartz control direct drive system speed 33.45 rotation speed fine adjustment range ± 8% (continuously variable) W453 x H162 x D360 mm approx. 12.5 kg
Technics machined aluminum EP adapter It's a convenient item to have for listening to singles. There is a feeling of use such as dullness (Hiroki Aso)
Accessories: none
Set of 4 classic TAOC basses. Made of high-carbon cast iron with excellent vibration handling capabilities. It can be used for a wide range of speakers from large to medium, and accurately reproduces sound images. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Accessories: none
Main specifications: W100×H200×D300mm 9.2 kg
The original appeal of Arden, where a simple, beautiful design and deep sound coexist with full internal and external maintenance utilizing original capacitors, has been revived. This is the second generation of Tannoy's famous machine ARDEN. The warm and soft tone is attractive. It plays all kinds of music lusciously and gently. The sense of scale of the orchestra and the smooth playback of stringed instruments are satisfying enough to listen to. There are repair marks on the edge of the cone paper on one side and the top surface on one side. The exterior has been beautifully finished due to exterior maintenance. Serial 0016190/0005927 (Murakoshi Yoichi)
Maintenance information: 2024.4.3 maintenance (exterior repair) 2022.5.30 maintained (output terminal contact cleaning. Chassis screw replacement. Internal connection terminal (faston) replaced with a new one. ATT (SW type) contact cleaning. A frequency characteristic measurement check (~ 42 kHz) was performed, and the original capacitor was continuously used because the results were good. Check the input/output waveform and balance, and check the sound output. Unit maintenance (low range side: edge replacement, magnetic circuit rust removal/gap cleaning/center adjustment, high range side: magnetic circuit rust removal/gap cleaning/center adjustment. Exterior repair/polishing/oil finish. Front and rear baffles/hakama repair/painting Saran net replacement. (Detachable unit)
Accessories: saran net
Main specifications: 2 way, 1 speaker, bass reflex system, floor type specification unit 3828, crossover frequency, 1 kHz, output sound pressure level, 91.5 dB, 8 ohms, dimensions W660 x H990 x D370 mm, weight 43 kg/book
The disposal price has been reduced! (Member prices are not applicable) 2023/4/15 sales price 148,000 yen Overhauled by the manufacturer! The maniacal 300B power amplifier is now in stock in kit type. This is a product that Sun Valley/Kit stores were fully satisfied at the time and took on a new challenge. You can enjoy the sound unique to Sun Valley, which is plump and has a good tone. The exterior is dull, but there are no noticeable scratches. (FUJISAWA KOSHI)
Maintenance information: 2024.4.15 Maintained by the manufacturer (after fixing production issues, measurement and aging (5H) were completely reworked, and the 300B1 was replaced due to poor output (insufficient output). Since this product is a circuit with a transformer arranged at the input part, the input impedance is designed to be lower than a normal vacuum tube amplifier. Therefore, we recommend using the input volume at the maximum position unless there are special circumstances)
Accessories: power cord, manufacturer measurement table
Main specifications: 300B single power amplifier vacuum tube configuration: first stage 6C6 x 2, output stage 300B with adjustable ham balance only wiring method: all manual wiring bonnet: none Rated output: 8W+8W/8Ω, THD 10% frequency characteristics: 25Hz to 40kHz (1W, -3dB) gain: 25dB power consumption: rated 90W output impedance: 4,8,16Ω (select any system during production) ) Size (including vacuum tube and protrusions) W330 x D280 x H210 mm, weight approx. 12.5 kg
Pair tube military high reliability tube 6V6GT equivalent tube black base smoke measurement value 84/84 (rejected value 46), all but the printing on the top of the tube with white box has disappeared, but it was determined that it was CV511 based on the structure ※The pair was determined based on the gM value measured by the test machine TV-7 (Kojima Yosuke)
Accessories: white box
Pair tube military high reliability tube 6V6GT equivalent tube tea base smoke code: 7220/7220 measured value 90/88 (rejected value 46) with original box*Pairs are judged based on gM values measured by testing machine TV-7 (Kojima Yosuke)
Accessories: original box
Pair tube military high reliability tube 6V6GT equivalent tube tea base smoke code: 7220/7220 measured value 92/92 (rejected value 46) with original box*Pairs are judged based on gM values measured by testing machine TV-7 (Kojima Yosuke)
Accessories: original box
Real sound processor for home theaters Just by connecting to a home theater speaker, the sound image and localization become clear, the live feeling increases, and the surround effect is enhanced. There are tape marks on the exterior. Serial 001288 (Tamura Eiji)
Maintenance information: 2024.4.24 Operation confirmed
Accessories: none
Main specifications: Compatible impedance of 4 ohms to 6 ohms is desirable, maximum output of 1 kW or less is desirable, W113 x H41 x D56 mm, mass approx. 170 g
Maintained! It is a control amplifier that shines with a good sense of design such as the meter on the front panel. The sound quality makes you feel calm and natural. Recommended for those with high phono input quality and listening to records. As for the exterior, there is rust on the top plate. Serial 200655 (Fujisawa Yukishi)
Maintenance information: 2024.4.21 Maintained (micro relay and resistor replacement, diode replacement. MONITOR lever SW replacement, volume VOL exchange Other head amplifier transistor deterioration replacement, power supply resistance, capacitor replacement, application of polishing grease to each other SW disassembly contact, confirmation of sound output for each input/output connection)
Accessories: No accessories
Main specifications: phono input: 2 systems (MC head amplifier built into PHONO1) W430 x H170 x D320 mm weight 11.2 kg
A popular SME classic headshell with a stylish design. It's lightweight, which is essential for light needle pressure arms and heavy cartridges, and after all, this is the best fit for SME arms (Sasaki Shota)
Accessories: none
Main specifications: aluminum stamping dead weight 8g
A popular SME classic headshell with a stylish design. It's lightweight, which is essential for light needle pressure arms and heavy cartridges, and after all, this is the best fit for SME arms (Sasaki Shota)
Accessories: none
Main specifications: aluminum stamping dead weight 8g
original needle. It combines the delicate expressive power unique to light needle pressure with an energetic, thick sound typical of Type 3. Recommended for those who listen to jazz and rock (Sasaki Shota)
Maintenance information: 2024.4.25 Sound output operation confirmed
Accessories: none
Main specifications: mm type frequency range 10 Hz to 25,000 Hz output voltage 3.5 mV needle pressure 0.75 g to 1.25 g weight 6 g
original needle. It combines the delicate expressive power unique to light needle pressure with an energetic, thick sound typical of Type 3. Recommended for those who listen to jazz and rock (Oikawa Tetsuji)
Maintenance Information: 2024.4.25 Operation confirmed
Accessories: none
Main specifications: mm type frequency range 10 Hz to 25,000 Hz output voltage 3.5 mV needle pressure 0.75 g to 1.25 g weight 6 g
A sound field tuning panel with strong stainless steel ribs with a thickness of 3 mm attached to Cirlogic's wooden tuning panel to give it the ability to contain deep bass. The hollow structure of coniferous plywood and pine wood enhances the transparency of sound quality. There are various ways to use it depending on the installation method, and it is versatile, such as expanding the listening point and enjoying sound quality with a comfortable sound field even in the living room, or absorbing boomy sound quality and enjoying fresh sound quality. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Accessories: none
Main specifications: Dimensions W910 x H1300 x D61 mm 26.6 kg (actual measurement)
The price has been reduced! 2024/4/23 sales price 118,000 yen This is a Rotel premain amplifier with a built-in D/A converter. It comfortably sounds modern sources with delicate and highly transparent sound quality. It is a convenient product that can also be used for high quality playback for display, with a wide selection of 3 types and 6 systems of D/A inputs. Serial 702-3421046 (Fujisawa Yukishi)
Maintenance information: 2024.4.23 Operation confirmed
Accessories: remote control, instruction manual, power cord, original box
Main specifications: built-in D/A converter (optical coaxial USB) rated output 120W+120W W431 x H150 x D350 mm weight 13.7 kg
The price has been drastically reduced. 2024/2/23 sales price 99,800 yen with box! RME audio interface. A rich 18-in/18-out audio channel, a high-performance digitally controlled preamp, and an AD/DA converter all support operation at 192 kHz. Achieving the performance required in professional settings with a half-rack size body (Sasaki Shota)
Maintenance information: 2024.2.23 Operation confirmed
Accessories: instruction manual, power cable, connection cable, setup disc, original box
Main specifications: maximum 192 kHz compatible coaxial input/output x 1 system maximum 192 kHz (S/MUX4) compatible optical input/output x 1 system analog input/output can be used simultaneously 8 channel AD/DA converter, mixing console, external effects insert function, word clock (BNC) input/output x 1 system MIDI input/output, 2 MIDI input/output systems, W216 x H46 x D145, weight 1.1 kg
MARK LEVINSON JC-2 power supply box produced by Rizaye. Operation has been confirmed. The main unit connection cable is not included. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.4.21 Operation confirmed (sound output confirmed on JC-2)
Accessories: power cable
Main specifications: W140 x H83 x D204 mm 1.1 kg
It is a model designed to further enhance the results of the regular type, with the main focus on thoroughly eliminating sound quality deterioration factors such as mechanical vibration and electrical vibration. 4-tier rack for analog players with decoupler The exterior has dullness and scratches (Satoshi Yonejima)
Accessories: No accessories
Main specifications: shelf size/1st tier 160mm/ 2nd tier 180mm/ 3rd tier 60mm W600 ✕ H540 ✕ D475mm 8.8 kg
Quadra 180mm pole set of 4 The neck is curved rather than straight. There is oxidation on the exterior (Tamura Eiji)
Accessories: head part of the head
※The pole size is 32 mm in diameter, but the casters are inexpensive because they are 19 mm in diameter. Quadraspires 4-tier rack. In addition to excellent design, the structure based on theory is also attractive, as the shelf board has sufficient rigidity even though it has a simple structure, and is subtly curved and cut so that vibration components gather at the four corners. The exterior is dirty and dull (Yonejima Satoshi)
Accessories: casters
Main specifications: W588 x H515 x D395 mm (actual measurement) 1st stage 100 mm, 2nd stage 140 mm, 3rd stage 180 mm 12 kg (actual measurement)
The 1.8 m PSE standard MK2 power cable is not only flexible and easy to use, but the sound quality has also been brushed up with fewer habits. You can get clear, sharp sound. There is a frayed sheath (Tamura Eiji)
Maintenance information: 2024.4.24 continuity confirmed
Accessories: none
The 1.8 m PSE standard MK2 power cable is not only flexible and easy to use, but the sound quality has also been brushed up with fewer habits. You can get clear, sharp sound. There is a frayed sheath (Tamura Eiji)
Maintenance information: 2024.4.24 continuity confirmed
Accessories: none
3P power plug 125V/15A specification. The thickness from the low to medium range is natural, and the unplated brass sound has no habit compared to other plated plugs, so you can use it with peace of mind. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Accessories: none
G-shell oval needle model from the Herman era. The glossy, rich, and heavy sound is an appeal that never fades. It is an eternal cartridge that fully conveys the appeal of analog (Yasuhito Koshihama)
Maintenance information: 2024.4.25 storefront operation confirmed
Accessories: original box
Main specifications: G shell oval needle MC type output 0.2 mV needle pressure 3 to 4.5 g internal impedance 2 ohms dead weight 31 g
RCA cable, 1.0 m pair, 6N-7N hybrid conductor, twin core structure, thick and strong mid-range, this hidden name cable is recommended for vintage audio. There is dirt on the sheath (Tamura Eiji)
Maintenance information: 2024.4.24 continuity confirmed
Accessories: none
This standard cartridge is particularly famous in the company's MC series. It has good stretch in the high range and a texture that feels good against the skin, has thickness and density in the mid-range, and it is a tone that makes you feel a sense of temperature (Oikawa Tetsuji)
Maintenance Information: 2024.4.25 Operation confirmed
Accessories: none
Main specifications: MC type output voltage 0.09 mV needle pressure 1.7 g playback frequency band 20 to 20,000 Hz load resistance 10 ohms internal impedance 3 ohms dead weight 7 g
Comes with original box! An A-shell oval needle characterized by the SPU's original direct sound. The sharp, firm, and powerful mid-low range and detailed expressiveness are attractive. There are fewer incidental sounds than the G-shell elliptical type, so you can enjoy an even more direct tone. Serial 924201 (Fujisawa Yukishi)
Maintenance information: 2024.4.6 operation confirmed
Accessories: original box, needle cover
Main specifications: MC type 0.2 mV 3 to 4.5 g internal impedance 2 ohms load resistance 47 kΩ oval needle dead weight 23.6 g (mounter and screws included)
※Since the cantilever is slightly raised, it is inexpensive. Mid-range models in the MC Star series, which come in 3 types. Both models have different sounds, and they are all unique, but 20W is a model that places particular emphasis on the mid-range. The sound is warm in tone, and has an extrusive, and comfortable sound that goes through the SPU. The wooden body made of Yamanaka lacquer, which is a traditional Japanese craft, is also beautiful.
Maintenance Information: 2024.4.25 Operation confirmed
Accessories: none
Main specifications: MC type output voltage 0.5 mV suitable needle pressure 2.3 g recommended load impedance 10 to 200 ohms dead weight 10.5 g
Comes with original box SPU synergy with the highest output in the SPU lineup. Using a G-shell containing neodymium magnets and zinc powder, it combines a modern, energetic sound with a rich sound typical of an orthophone. The stylus is good (Sasaki Shota)
Maintenance information: 2024.4.25 Sound output operation confirmed
Accessories: original box
Main specifications: MC type output voltage 0.5 mV diamond oval needle frequency characteristics 20 to 20,000 Hz needle pressure 3 g dead weight 30 g