XLR cable 3ch line selector High quality parts are used for the changeover switch, connector, and internal wiring, and the original sound quality is conveyed as it is. You can select up to 3 amplifiers (pre-amplifier or pre-main amplifier) for 1 source device. Also, you can select up to 3 source devices to be switched for 1 amplifier (preamp or premain amplifier). You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.5.14 continuity confirmed
Accessories: none
Main specifications: 1 input/3 output systems GND common to all input/output W250 x H64 x D117 mm 2.3 kg
The disposal price has been reduced! (Member discounts are not applicable) 2023/6/27 sales price 500 yen ORSONIC dry record cleaner. In addition to the velvet on the cleaner surface peeling off, there is an overall feeling of use (Asaine Tomoho)
Accessories: none
Unopened brand new (opened for photography) arm lifters that can smoothly operate tone arms without lifters, such as the RMG309i and RMG212i orthophone. Can also be used on the company's old models with a rotating shaft diameter of 20 mmφand RMA types for A shells (Oikawa Tetsuji)
Accessories: original box
Comes with original box! Digital needle pressure gauge for analog record players. Compatible with measurements from 0.01g to a maximum of 200g. The tray has a layout that makes it easy to place needles. The LCD screen is backlit and equipped with an auto off function. The exterior has a feeling of use such as dullness (Hiroki Aso)
Maintenance information: 2024.5.20 Operation confirmed
Accessories: none
Main specifications: AAA battery specification W93 x H17 x D115 mm dead weight 115.5 g
The price has been reduced. 2024/2/2 sales price 2,500 yen. ※Inexpensive because 1 bottle is out of stock. Orthophone speaker terminal joint cable Be sure to improve the sound quality of speakers compatible with bi-wiring with 7N ultra-high purity copper wire. One vinyl cover is short (Takasaki Atsushi)
Accessories: original box
Main specifications: 7N copper (diameter 1mm) +gold plating treatment approx. 150mm/book
This is a set of 4 small spikes. It has good cost performance, high rigidity that can withstand a single point load at point contact, and achieves stable point contact. There is a feeling of use on the exterior such as dullness and small scratches (Tamai Jun)
Accessories: none
Main specifications: diameter 20 mm x H9.9 mm 15.8 g (1 piece)
The price has been reduced! 2024/3/22 sales price 29,800 yen The tuning hole uniquely arranged on Oyaide's turntable plate thoroughly eliminates unnecessary vibrations that disrupt the record board's trace, and can also be used in combination with a stabilizer to correct the warpage of the record board and expect an appropriate trace. There are small scratches and dullness on the exterior (Tamura Eiji)
Accessories: instruction manual, original box
Main specifications: dimensions: 294 mm, thickest part: 5 mm, 670 g
This is a set of 4 small spikes. It has good cost performance, high rigidity that can withstand a single point load at point contact, and achieves stable point contact. There is a feeling of use on the exterior such as dullness and small scratches (Tamai Jun)
Accessories: none
Main specifications: diameter 20 mm x H9.9 mm 15.8 g (1 piece)
This is a set of 4 small spikes. It has good cost performance, high rigidity that can withstand single point loads at point contact, and achieves stable point contact. There is a feeling of use on the exterior such as dullness and small scratches (Tamai Jun)
Accessories: none
Main specifications: diameter 20 mm x H9.9 mm 15.8 g (1 piece)
The core model of the high-grade power plug “PC Series”. All PSE standard parts are completely non-magnetic. Due to the characteristics of silver+rhodium plating, it has high resolution, high response, and wide range characteristics. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Accessories: none
This is a model with PAD cryo treatment applied to the TOSHIBA 3P/2P conversion adapter. There are some cracks, but they are glued together (Oikawa Tetsuji)
Maintenance information: 2024.4.20 continuity confirmed
Accessories: none
2-row 6-piece outlet plate with corrosion-resistant aluminum alloy+full coated new metal. There is no problem with the appearance (Kanai Hidetsugu)
Accessories: none
Main specifications: W120 × H116 × D6.5 mm
This is a set of needle tip cleaning solution and brush. Normally, you can use a dry method with only a brush, and a wet method that uses liquid when the dirt is severe (Hiroki Aso)
Accessories: brush case
Speaker stand for the company's S-55twin. It is a size that is useful for other small and medium speakers. In addition to the exterior and veneer peeling on the side of the bottom, dullness and a feeling of use can be seen (Kobayashi Hitoshi)
Accessories: instruction manual
Main specifications: W310 x H498 x D350 mm weight 5.8 kg
Pioneer ceramic straight arms. This is a genuine arm for the company's record player, and is also compatible with PL-70L2 and P3a (Satoshi Yonejima)
Maintenance information: 2024.5.15 continuity confirmed
Accessories: No accessories
Main specifications: straight arm pipe compatible player PL-7L PL-70L2 P3a, etc.
A compact, high CP, and easy headphone amplifier. The sound is bright and has good visibility. A well-balanced model that works well with everything from pop to rock. Serial 32741 (Fujisawa Yukishi)
Maintenance information: 2024.5.18 Operation confirmed
Accessories: instruction manual, AC adapter
Main specifications: output 330 mw/30 ohm, 60 mw/300 ohm headphone amplifier connection, 30 ohm gain, 11 dB S/N ratio, 87 dB frequency characteristics, 30 to 20 kHz, input/output RCA, 1 system each, W103 x D127 x H38 mm, 1.40 kg
The price has been reduced. 2023/6/27 sales price 15,000 yen Qables Potaan is 192 kHz compatible. It supports up to 192 kHz/24 bit via the SPDIF digital input terminal and 48 kHz/16 bit via USB. For those looking for high quality sound anywhere easily (Oikawa Tetsuji)
Maintenance Information: 2023.6.27 Operation confirmed
Accessories: connection cord, case
Main specifications: W70 x H23 x D126 mm 200 g
The disposal price has been reduced. Member prices are not applicable. 2023/12/10 sales price 25,000 yen*Since the output terminal has been remodeled to an XLR terminal, it is inexpensive. It is a pretty niche product that uses 2 stereo amplifiers so that it can be used like a mono amplifier. Actually, it seems to be a product intended for use with the company's 405-2. There is a lot of dullness on the exterior due to aging (Fujisawa Yukishi)
Maintenance information: 2023.6.4 sound output confirmed
Accessories: none
Main specifications: W80xH47xD140mm approx. 1.0 kg/unit
Set of 4 This is a black pole, an option for 180mm pole (19mm diameter) quadraspires. Please use it as an additional pole for Q4, Q4D, etc. There are small scratches and dullness on the exterior (Mizusaki Ryo)
Accessories: none
Key Specifications: 180mm length/19mm diameter optional pole
100mm pole (19mm diameter) set of 4 black color Please use it to add shelves or extend poles for Q4, Q4D, etc. There are abrasions and line scratches in places (Mizusaki Ryo)
Accessories: none
Key Specifications: 100mm length/19mm diameter optional pole
Set of 4 This is a black pole, an option for 180mm pole (19mm diameter) quadraspires. Please use it as an additional pole for Q4, Q4D, etc. There are small scratches and dullness on the exterior (Mizusaki Ryo)
Accessories: none
Key Specifications: 180mm length/19mm diameter optional pole
Set of 4 This is a black pole, an option for 180mm pole (19mm diameter) quadraspires. Please use it as an additional pole for Q4, Q4D, etc. There are small scratches and dullness on the exterior (Mizusaki Ryo)
Accessories: none
Key Specifications: 180mm length/19mm diameter optional pole
Set of 4 This is a black pole, an option for 180mm pole (19mm diameter) quadraspires. Please use it as an additional pole for Q4, Q4D, etc. There are small scratches and dullness on the exterior (Mizusaki Ryo)
Accessories: none
Key Specifications: 180mm length/19mm diameter optional pole
Set of 4 140mm pole (19mm diameter) black pole Please use it when adding shelves such as Q4 or Q4D. The exterior has dullness and small scratches (Mizusaki Ryo)
Accessories: none
Key Specifications: 140mm length/19mm diameter optional pole
Set of 4 140mm pole (19mm diameter) black pole Please use it when adding shelves such as Q4 or Q4D. The exterior has dullness and small scratches (Mizusaki Ryo)
Accessories: none
Key Specifications: 140mm length/19mm diameter optional pole
Set of 4 140mm pole (19mm diameter) black pole Please use it when adding shelves such as Q4 or Q4D. The exterior has dullness and small scratches (Mizusaki Ryo)
Accessories: none
Key Specifications: 140mm length/19mm diameter optional pole
Set of 4 140mm pole (19mm diameter) black pole Please use it when adding shelves such as Q4 or Q4D. The exterior has dullness and small scratches (Mizusaki Ryo)
Accessories: none
Key Specifications: 140mm length/19mm diameter optional pole
Quadra Spire Center Speaker Stand This stand allows you to adjust the angle according to the listening position. As for the exterior, felt is attached to the bottom (Tamura Eiji)
Accessories: No accessories
Main specifications: W375 x H111 x D290 mm
Granite speaker stand by Ishizo Unkei. It has been mirrored and has a careful finish. It contributes to damping the vibration and tightening of the sound of small speakers (Ryo Mizusaki)
Accessories: none
Main specifications: top plate W160 x D220 mm bottom surface W220 x D270 mm height 605 mm weight 17.3 kg
A plug adapter that converts a micro jack to a stereo mini plug. It is convenient for converting plugs into headphones, etc. The appearance is good with little feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.4.21 continuity confirmed
Accessories: none
Main specifications: total length 8 cm
Micro jack to stereo mini plug adapter It is used when converting a micro plug to a stereo mini plug. There are cracks in the plastic packaging due to aging (Murakoshi Yoichi)
Maintenance information: 2024.4.21 continuity confirmed
Accessories: package
RCA relay plug Mono Lou Mono Pairs Adopts a metal body. You can see the exterior, disappearing characters, dullness, and feeling of use (Kobayashi Hitoshi)
Accessories: none
Parallel adapter for stereo mini plugs There are many ways to use it, such as two people enjoying music at the same time from a single earphone terminal. There is a slight feeling of use (Murakoshi Yoichi)
Accessories: none
Standard plug to mini jack plug adapter. A microphone with a mini plug can be used as a microphone terminal on a tape deck, etc. (Mizushima Itsuro)
Accessories: none
Real sound processor for home theaters Just by connecting to a home theater speaker, the sound image and localization become clear, the live feeling increases, and the surround effect is enhanced. There are tape marks on the exterior. Serial 001288 (Tamura Eiji)
Maintenance information: 2024.4.24 Operation confirmed
Accessories: none
Main specifications: Compatible impedance of 4 ohms to 6 ohms is desirable, maximum output of 1 kW or less is desirable, W113 x H41 x D56 mm, mass approx. 170 g
SWING velvet record cleaner. On the exterior, there is a feeling that the case lid is missing, faded, dull, etc. (Kobayashi Hitoshi)
Accessories: case bottom
Main specifications: W88 x H60 x D33 mm, weight 18 g (main unit only)