A speaker stand that suppresses standing waves around the speaker by placing the speaker at an angle to the horizontal or vertical direction. Acoustical characteristics can be obtained so that the entire room is enveloped in sound. Comes with exclusive sorbocaine (Kojima Yosuke)
Accessories: none
Main specifications: bottom surface W125 x D125 mm top plate φ60 height 190/145/110/90 mm weight 1.5 to 1.6 kg (actual measurement) /book
DALI's popular tall boy model. The high quality real wood finish exudes a sense of luxury. It features a mild, high-grade tone with a high texture, and demonstrates its strengths in acoustic sounds and female vocals. ※The dowels on the saran net are tight and difficult to remove, but this is the current situation. There are small scratches, saran net marks, and some stains on the base. Serial 9541340/9541340 (Takasaki Atsushi)
Maintenance information: 2024.5.23 sound output confirmed
Accessories: saran net, jumper, spike, spike holder
Main specifications: 3-way 3 speakers, frequency characteristics, 43 Hz to 25 kHz, crossover, 3.4 kHz, sound pressure level, 90 dB, impedance, 4 ohms, W170 x H845 x D220 mm, 11.7 kg
The 0.5 m HDMI cable connector is made of high-grade aluminum material, and the outer skin of the cable uses a slim nylon mesh cable that can be wired neatly and is less burdensome when bending. Compatible with 4K2K (60P), it is possible to faithfully transmit high quality video and sound (Tamura Eiji)
Maintenance information: 2024.5.24 Operation confirmed
Accessories: case
The HDMI cable is a 3.0 m high-grade connector, and a nylon mesh cable is used for the outer shell. It is possible to faithfully transmit high quality video and sound (Tamura Eiji)
Maintenance information: 2024.5.24 Operation confirmed
Accessories: none
The classic model for professional 1" screwdrivers. It is installed in many of the company's 43 series, etc., and it is a driver that is easy to balance even when combined with various woofers and tweeters. There is a feeling of use due to appearance, dullness, small scratches, abrasions, etc. (Takasaki Atsushi)
Maintenance information: 2024.5.24 sound output confirmed
Accessories: none
Main specifications: 1 inch driver, throat diameter: 25 mm, 16 ohms (measured 10/12 ohms), 118 dB, frequency characteristics, 800 Hz to 20 kHz, crossover frequency: 500 Hz or more, 5.1 kg
Maintained by the manufacturer! Rotel's pre-main amplifier. The successor to the company's RA-1062. A full-scale design that uses WBT terminals and other parts that cost more than the price. The unobtrusive and refreshing sound quality is compatible with a wide variety of genres. As for the exterior, there is a feeling of use such as scratches and dullness on the top plate. Serial 867-3031022 (Tomonori Asaine)
Maintenance information: Maintained on 2024.5.24 (volume rotation improvement implemented. Speaker relay contacts have deteriorated (both A/B), B has been replaced, and A improvements have been implemented. (Other maintenance carried out)
Accessories: remote control power cord
Main specifications: 75W+75W with MM input W431 x H99 x D358 mm 8.7 kg
Digital cable equipped with a 1.2 m XLR terminal hyperdigital isolator. The separation is good, and the sound quality is clean and sharp, and is typical of Saek. All the stickers on the isolation box have been peeled off (Kojima Yosuke)
Maintenance information: 2024.5.24 sync, sound output confirmed
Accessories: original box
Balance cable, 1.0m, pair notric plug, OFC conductor, pyramid, has a calm, balanced sound and has a unique thick air feel*The plug on the R side cable is attached in the opposite direction of conduction. There is friction around the plug and the sheath (Kojima Yosuke)
Accessories: none
Balance cable 1.5m Peer Noitric plug OFC conductor pyramid has a calm, balanced sound and a unique thick air feel. There is friction around the plug and the sheath (Kojima Yosuke)
Accessories: none
※Only 1 wooden horn is compatible with FOSTEX drivers, of course, but also JBL 1-inch drivers (3-point stop). It is a horn characterized by a broad sound unique to wood horns, which is different from metal horns (Takahashi Nobuyuki)
Main specifications: cutoff frequency 420 Hz throat 2.54 cm birch wood parallel plywood W444 × H90 × D293 mm 3.1 kg (actual measurement)
This is a speaker system mounted on Altec's coaxial 8-inch unit 409-8E. The compatibility between Yonematsu, which has a good sound, and the bright and light 409-8E is excellent, and drinking drops to the medium to high range, which has a nice texture. The light, mid-range tone goes great with old sauces. There is dullness and small scratches (Sasaki Shota)
Maintenance information: 2024.5.23 Sound output test is good
Accessories: none
Main specifications: Unit used: 409-8E playback frequency band 85 to 18,000 Hz efficiency 97 dB W377 x H432 x D189 (top surface) 238 (bottom) mm 6.4 kg (actual measurement)
The price has been reduced! 2024/5/23 sales price 1,380,000 yen B&W 40th anniversary limited model of 500 units. Not only are diamond tweeters that reproduce extremely clear, natural high frequencies, but their ability to reproduce low frequencies with a sense of volume is also attractive. The low range is well balanced with the mid to high range, and the localization is clear, and it is expressed with a rich sense of color, especially in classical music. As for the exterior, there is a feeling of use such as a line scratch or dullness on the back. Serial 0002291 0002292 (Asaine Tomoho)
Maintenance information: 2024.5.23 sound output confirmed
2022.12.14 Maintained by the manufacturer (tweeter replacement operation test)
Accessories: saran net spike foot jumper sponge hex wrench
Main specifications: 2-way bass reflex playback frequency band 32 Hz to 33 kHz 8 ohms crossover frequency 3.8 kHz W230 x H930 x D375 mm 25 kg
Tannoy Mercury series small bookshelf. It uses network technology that follows the technology of the company's Prestige “SE” series. Silver-coated copper wire manufactured by Vandenhall is used for internal wiring to enhance sound quality. There are dust stains on the tweeter dome, small scratches such as peeling veneer on the upper front corner, and a feeling of use (Murakoshi Yoichi)
Maintenance information: 2024.5.23 sound output confirmed
Accessories: saran net
Main specifications: 2 way 8Ω 86dB W140 × H210 × D160 mm 2.2 kg
Maintained! Woofer unit used in A5. It is a 38cm Alnico magnet, and the open sound is truly Altec. There are repair marks on the edge (Sasaki Shota)
Maintenance information: 2024.5.23 Maintained (voice coil, grommet, tinsel, and connection terminal parts were polished, connected with aluminum solder, and improved contact. Edge crack repair)
Accessories: none
Main specifications: 38cm cone woofer unit impedance 16 ohms output sound pressure level 104 dB 12.4 kg
*This is a record player with Garrard 401 and Technica AT-1503/3 mounted on a 50Hz double arm cabinet. The powerful, thick, and energetic sound unique to rim drives is attractive, and you can enjoy the rich sound typical of analog. The exterior has peeling, scratches, erased characters, scratches, etc. Serial 42640 (Tamura Eiji)
Maintenance information: 2024.5.23 Maintained (dirt cleaning. Motor disassembly, inspection, lubrication and assembly. Motor spring rubber sleeve deterioration replacement. AC cord deterioration, replacement. Main bearing disassembly, bearing thrust wear, replacement, lubrication, oil sealant application, assembly. idler cleaning. Speed adjustment linkage adjustment. brake adjustment. Oil felt replacement. Mounting stud bolts missing or added; nuts, metal washers, and rubber washers added. Running test → OK. (*There is a slight loud noise when turning in the opposite direction, but this is the current situation)
Accessories: none
Main specifications: 50 Hz specification idler drive 33/45/78 rotation arm part: static balance type execution length 257 mm compatible cartridge 13.5 to 33 g (including shell) needle pressure range 0 to 3 g W540 x H180 x D640 mm
MC step-up transformer. It features a body structure that thoroughly eliminates magnetic noise. The sound is fresh and smooth. The range is also wide, and the sound quality is relaxed and elegant. There are a few small scratches. Serial T30905032 (Fujisawa Yukishi)
Maintenance information: 2024.5.23 Operation confirmed
Accessories: instruction manual
Main specifications: Compatible cartridge impedance 1.5 to 40 ohms load impedance 47 kΩ boost ratio 26 dB W133 x H85 x 129 mm 1 kg
This new model uses an unprocessed HiFC conductor for the 1.8 m pair speaker cable and improved the company's popular model SP #79Mk -2. The sound is clear and clear. (FUJISAWA KOSHI)
Maintenance information: 2024.5.23 continuity confirmed
Accessories: No accessories
RCA cable 1.2m pair finished LINN black cable If you're a fan of the company, you can't miss this classic cable. You can hear a soft, smooth, detailed, and well-organized sound. (FUJISAWA KOSHI)
Maintenance information: 2024.5.23 continuity confirmed
Accessories: original box
The RCA cable uses 102 SSC as the 1.0 m pair conductor and polymer polyolefin as the insulator. This is Oyaide's proud work, which is particular about precision processing. I am overwhelmed by how clear the sound quality surpasses the previous model. (FUJISAWA KOSHI)
Maintenance information: 2024.5.23 continuity confirmed
Accessories: No accessories
Pickering's classic headshell. The aluminum press finish has just the right amount of sound. The overhang is adjustable, and the wide mounting width makes this model easy to use. There is a slight screw scratch. (FUJISAWA KOSHI)
Maintenance information: 2024.5.23 continuity confirmed
Accessories: No accessories
Main specifications: aluminum stamping weight 8.2 g
A multi-combination structure that allows you to select 7 weights by combining 3 types of stabilizers. It makes it possible to fine-tune the sound quality for each record, and it can also be used on record players that are not compatible with heavy stabilizers. (FUJISAWA KOSHI)
Accessories: instruction manual
Main specifications: W69 x H27 mm (when all parts are attached) under (polycarponet) 70g inner (brass+gold plated) 90g upper (brass+uredium plated) 160g
DENON's classic MC cartridge. The balance of localization and sound is excellent, and all music genres can be played without difficulty. This cartridge can be recommended to a variety of people, from analog beginners to experts. There are no needle bends. Serial 4623 (Fujisawa Yukishi)
Maintenance information: 2024.5.23 Operation confirmed
Accessories: needle cover
Main specifications: MC type output voltage 0.3 mV playback frequency 20 Hz to 45 kHz electrical impedance 40 ohms needle tip 16.5 microns round needle pressure 2.2 to 2.8 g dead weight 8.5 g
Tokyo soundproof turntable seat using vibration-absorbing rubber. The vibration convergence time is overwhelmingly fast, and it effectively absorbs unwanted vibrations in the frequency band that is important for music playback. (FUJISAWA KOSHI)
Accessories: case
Main specifications: size 4 mm thick x 291 mm diameter weight 330 g
Comes with original box! Antistatic brush for audio Uses the core-sheath composite conductive acrylic fiber “COREBRID TMB/Core Brid TMB,” which was developed by Mitsubishi Chemical Corporation and is the only one produced in the world. Produced domestically using traditional manufacturing methods, this brush removes static electricity from analog records, CDs, Blu-rays, etc., so you can enjoy the original sound quality and images. (FUJISAWA KOSHI)
Accessories: original box
An EAR stereo power amplifier boasting a large 70W output with a KT90 parallel push configuration. While having the torque to drive large speakers, the beautiful sound that is glossy and intense is an appeal unique to EAR vacuum tube amplifiers. It also supports balanced inputs, so you can enjoy various combinations from vintage to high-end systems. It is slightly dull and has threads. Serial 010113 (Takasaki Atsushi)
Maintenance information: 2024.5.23 Operation confirmed
Accessories: manual, power cord, cleaning cloth
Main specifications: 60W+60W (8Ω) class A parallel push-pull vacuum tube ECC83 x 2, ECC82 x 2, KT90 x 8 W405 x H165 x D405 mm 24 kg
Maintained in 2015. The 606 is thick and unimaginable from its compact exterior. The good sound unique to QUAD allows you to enjoy not only classical music, but also jazz vocals in a mild way. The high level of musicality that makes you enjoy the music with a pleasant tone stands out. There is deterioration in exterior paint (Murakoshi Yoichi)
Maintenance information: 2015.9.12 maintenance completed (internal power transfer → malt plane deterioration → dismantling and reinstallation, exchange of both channel in-board bypass C, gain setting C, etc., TR check → OK, operation inspection check)
Accessories: power cord
Main specifications: output 140W+140W (8Ω) W321×H140×D238mm 12kg
Refresh yourself with internal and external maintenance! This is an attractive mid-size model with the large 38cm HPD385 unit pressed into a compact enclosure. It has good phase characteristics, and its highly textured, and moist tone makes classical music and vocals sound pleasant. The exterior has been beautifully finished due to maintenance. Serial 509925 509926 (Hiroki Aso)
Maintenance information: 2024.5.23 Maintained (exterior cleaning/repair/touch-up front baffle coating unit maintenance (edge damping agent coating high range side magnetic circuit rust removal/gap cleaning/center adjustment) ATT cleaning unit detached)
Accessories: saran net
Main specifications: coaxial 2-way speaker, front bass reflex system, 8Ω, 91 dB, W540 x H840 x D310 mm, 32 kg
The price has been reduced! 2024/5/23 sales price 148,000 yen This is a Venere series bookshelf model designed with a sharp form, breaking away from conventional classical styles. It is a speaker with an excellent glossy, smooth high frequency, and you can enjoy a particularly beautiful sound with stringed instruments and vocals. Serial 0077513 0077513 (Yamato Yuki)
Maintenance information: 2024.5.23 Operation confirmed
Accessories: Saran net original box jumper plate
Main specifications: Wave reflex bookshelf type unit tweeter 29 mm high resolution silk soft dome woofer 180 mm cone type frequency characteristics 45 Hz to 25,000 Hz output sound pressure level 88 dB/w/m 6 ohms size W276 x H1,130 x D391 mm 7.0 kg (1)
A typical woofer attached to first-class products such as the Exclusive2402 and Westlake Audio. It is a highly stable model that can withstand professional use. The response speed is fast and the sound that makes it stand up well is attractive. The exterior is generally beautiful (Tomonori Asae)
Maintenance information: 2024.5.23 sound output confirmed
Accessories: none
Main specifications: 40cm cone woofer frequency characteristics 28 Hz to 1000 Hz 8 ohms (measured 7.9 ohms) output sound pressure level 97 dB dimensions diameter 400 mm x depth 167 mm 11 kg/1
Celestion bookshelf speakers Using a felt fiber cone for the woofer diaphragm and a titanium diaphragm for the tweeter, the mid-range is slightly glittering. It creates what is called a British sound. The exterior has dullness and small scratches (Takahashi Nobuyuki)
Maintenance information: 2024.5.23 sound output confirmed
Accessories: saran net
Main specifications: 2-way 2-speaker sealed unit, 15 cm cone type, 2.5 cm dome type for low range, frequency characteristics, 75 Hz to 20 kHz, impedance 8 ohms, size W 185 mm x H310 mm x D 215 mm, weight 4 kg
Everything from the motor power supply to the tone arm has been fully maintained! New dust cover created! A player with a long-arm Ortofon AS-309S mounted on a TD-127. It comes with a dedicated optional weight, so you can use heavyweight cartridges such as SPUs. It has a high ability as a system, and it is a player that can play vividly regardless of genre, from classical to rock ※ The lifter works electrically, but since there is no sensor on the tone arm, auto stop or auto lift up is not possible (Oikawa Tetsuji)
Maintenance information: 2024.5.22 Maintained (deteriorated parts on the board, semi-fixed VOL for rotation speed adjustment, semi-fixed VOL replacement for sensor sensitivity adjustment. Front panel pitch adjustment VOL disassembly/contact polishing. Resolder the board. Disassemble and clean the arm. Drive belt replacement. Indicator lamp replacement. Grease up the platter bearing. Lubricate the motor shaft and disassemble and clean the clutch part. Floating, turntable rotation speed check, arm needle pressure check. Check the sound output. Chassis cleaning. (Comprehensive operation confirmation inspection)
Accessories: copy of instruction manual, optional weight
Main specifications: belt drive floating suspension 33/45/78rpm turntable 30cm zinc alloy 3.2kg double 16-pole synchronous motor speed fine adjustment range ± 6% W555 × H200 × D460 mm 20.4 kg
Fully maintained! The 38 series is the most popular 38FD. It has a warm tone with a warm tone, and there is plenty of warmth in the bass and mids, so you can enjoy the true essence of lackstone where you can enjoy the afterglow of the tone. There is slight rust on the back, but there are no major scratches other than that (Oikawa Tetsuji)
Maintenance information: 2024.5.22 maintained (solder correction, input/output waveform confirmation, load test (1kHz sine wave, at 8Ω load: 27W+27W), sound output test)
2023.12.17 Maintained (oil capacitor, block capacitor, electrolytic capacitor, film capacitor, fixed resistor, rectifier diode, DIN terminal, power supply SW, monitor SW, master VR, balance VR, rear panel VR, VR, rear panel VR replacement, RCA terminal polishing, lever SW disassembly and cleaning and application of grease to prevent oxidation and sulfation, replacement of 2 vacuum tube main parts, 50CA10 replacement, cabinet exterior repair/polishing/oil finish, input/output waveform Check, check for residual noise,
Load test (1 kHz sine wave, 27W+27W at 8 ohm load), sound output test)
Accessories: power cable, instruction manual
Main specifications: 30W+30W (4, 8, 16 ohms) line input 4 systems phono 2 systems (mm) W476 x H190 x D335 mm 18 kg
A CD player equipped with a DSD-compatible USB-DAC. The high quality playback sound is attractive due to the overwhelming amount of information and detail. The USB-A terminal on the front supports playback of iPods and USB memory devices, and a USB-B terminal (compatible only with PCs of the same age) is mounted on the back. There is a line scratch on the top plate, and the tray is slightly sticky (Oikawa Tetsuji)
Maintenance information: 2024.5.22 operation confirmed
Accessories: remote control, instruction manual, power cable, original box
Main specifications: 192 kHz/32 bit compatible DAC circuit, optical digital input x 1, USB (Type B) x 1, USB (Type A) x 1, analog audio output (L/R) x 1, optical digital output x 1, coaxial digital output x 1, W434 x H134 x D331 mm 8.2 kg
Maintained! Comes with a remote control. This model was created by gathering the know-how of the Integra series. There are only models produced with a thorough emphasis on sound quality, which is a bit different from other Integra series, and has a relaxed, relaxed sound. The exterior has dullness, threads, and small scratches. Also, the SP terminal has been replaced. Serial 6301012428 (Yonejima Satoshi)
Maintenance information: 2024.5.22 Maintained (push switch and remote wire switch disassembly contacts are polished and contact cleaner applied. Volume contact correction. (Remote control operation check OK)
Accessories: remote control, instruction manual
Main specifications: 155W+155W (6Ω) 120W+120W (8Ω) damping factor 400 (8Ω) frequency characteristics 2Hz to 100kHz W471 ✕ H170 ✕ D430 mm 26.6 kg
Maintained! NAKAMICHIN's pre-main amplifier is in stock for the first time in a while. Simple design like an English amp. The thick, energetic sound typical of Nakamichi is attractive. The exterior has dents, dullness, and small scratches on the top plate. Serial 07436 (Yonejima Satoshi)
Maintenance information: 2024.5.22 Maintained (output relay replaced. (Switch and volume contact correction)
Accessories: No accessories
Main specifications: 80W+80W (8Ω) equipped with Phonomm/MC W430 x H125 x D360 mm weight approx. 15.0 kg
*The 2-tier rack decoupler spike holder is not included. You can see the attention to design and sound quality at a high level, such as slits that have been carefully thought out for heat dissipation effects and resonance, and solid aluminum pillars. There are some threads and bumps on the exterior (Tamura Eiji)
Accessories: none
Main specifications: W597 x H455 x D475 mm between shelves 326 mm
Luxpremain entry model. You can enjoy solid LUXMAN sound at an affordable price. We recommend combining it with European speakers that are glossy, soft, and have a good tone. The exterior is dull and there are abrasions and small scratches on the top plate. Serial M90410348A (Yonejima Satoshi)
Maintenance information: 2024.5.22 operation confirmed
Accessories: remote control, instruction manual, power cord
Main specifications: 70W+70W (8Ω) line input 4 systems (RCA x 4, XLR x 1), 1 phono system (MM), 2 tape systems W467 x H151 x D439 mm 13 kg
A full-range speaker with a high BOSE interior. 1 bottle only. An indoor speaker with high efficiency and clear sound quality. It is optimally designed for low-volume background music. The exterior has yellowness, dullness, dirt, scratches, etc., and there is a feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.5.19 Operation confirmed
Accessories: mounting hardware
Main specifications: 5.7 cm full range driver x 1 allowable input 16 W impedance 8 ohms maximum sound pressure level 96 dB playback frequency band 90 Hz to 16 kHz W251 x H125 x D119 mm mass 1.8 kg
*Some SP terminal plates and screws on the OUT side are missing. A full-range speaker with a high BOSE interior. An indoor speaker with high efficiency and clear sound quality. It is optimally designed for low-volume background music. The exterior has yellowness, dullness, dirt, scratches, etc., and there is a feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.5.19 Operation confirmed
Accessories: mounting hardware, instruction manual
Main specifications: 5.7 cm full range driver x 1 allowable input 16 W impedance 8 ohms maximum sound pressure level 96 dB playback frequency band 90 Hz to 16 kHz W251 x H125 x D119 mm mass 1.8 kg
Currently sold. The tuner's auto tuning is not working, but the current situation is. This K series CD/USB receiver is compatible with playback of iPods/iPhones, USB memory devices, etc. This is a flat, unobtrusive amplifier with a straightforward sound. It can also be connected to a PC and is recommended for those who want to get started with desktop audio. Appearance, dullness, small scratches, and a feeling of use can be seen (Kobayashi Hitoshi)
Maintenance information: 2024.5.19 operation confirmed (tuner auto tuning not working, other operations confirmed)
Accessories: remote control, power cord
Main specifications: 50W+50W W245 x H104 x D309 mm weight 5.7 kg
The classic 101 mm small speaker. The sound, which has been compiled in one small full-range shot, makes all kinds of popular music sound cheerfully. The exterior and color are different due to discoloration of the saran net, and overall a feeling of use such as dullness, abrasions, etc. can be seen (Kobayashi Hitoshi)
Maintenance information: 2024.5.19 Operation confirmed
Accessories: none
Main specifications: 1 way 1 speaker impedance 6 ohms maximum input 150 W output sound pressure level 86 db W232 x H154 x D172 mm 2 kg
*Some SP terminal plates and screws on the OUT side are missing. A full-range speaker with a high BOSE interior. An indoor speaker with high efficiency and clear sound quality. It is optimally designed for low-volume background music. The exterior is dull and has scratches (Kobayashi Hitoshi)
Maintenance information: 2024.5.19 Operation confirmed
Accessories: mounting hardware, instruction manual
Main specifications: 5.7 cm full range driver x 1 allowable input 16 W impedance 8 ohms maximum sound pressure level 96 dB playback frequency band 90 Hz to 16 kHz W251 x H125 x D119 mm mass 1.8 kg
The price has been drastically reduced! 2024/5/21 sales price 1398,000 yen B&W 40th anniversary limited model of 500 units. Color white. Not only are diamond tweeters that reproduce extremely clear and transparent high frequencies, but their ability to reproduce well-balanced low frequencies is also attractive. The localization is also clear throughout the entire area, and classical music and vocals are reproduced with high quality. There is a line scratch on the base part on one side, a slight thread on the TW dome (no dents), and dents on the grill edge. Serial 0003431,0003432 (Fujisawa Yukishi)
Maintenance information: 2024.5.21 operation confirmed
Accessories: instruction manual, spike, rubber foot, jumper cable
Main specifications: 2-way bass reflex playback frequency band 32 Hz to 33 kHz impedance 8 ohms crossover frequency 3.8 kHz output sound pressure level 88 dB W230 x H930 x D375 mm 25 kg
Maintained! It is the 5th generation of the 907, the top model in the D series that continues to be popular. Brush-ups have been made, such as strengthening the power supply section from the previous game, and the ability to reproduce the low frequency range has been improved. Precision is also added to the wild Sansui sound that feels torque, making it fun to listen to classical music. The exterior has line scratches, threads, and chips in the corners. Serial 605104895 (Fujisawa Yukishi)
Maintenance information: 2024.5.21 maintained (tone, subsonic, CD direct, muting, input selector (all), reck-out, phono selector switch disassembly polishing grease application, output relay replacement, protector transistor replacement, power supply unit, constant current diode, resistor exchange, selector lamp replacement, adjustment volume replacement, solder repair, SP selector fixed, master volume, other VR Cleaning, internal inspection cleaning, adjustment inspection, operation confirmation. (*Relay operation takes 15 to 20 seconds)
Accessories: No accessories
Main specifications: 160W+160W (8Ω) PHONO (MM/MC) compatible W466 x H161 x D431 mm 26 kg
Maintained! Best buy model from the late 90s. It inherits the traditional diamond actuation circuit, and is characterized by a well-balanced sound with a refined circuit configuration, such as a sense of SN in the mid-high range, and the certainty of the outline in the low range. The exterior has scratches, etc. Serial 608024137 (Fujisawa Yukishi)
Maintenance information: 2024.5.21 maintained (input selector, power amplifier direct, reck-out, processor, MM/ MC changeover switch disassembly, polishing grease application, speaker 1/2 tone, ride ness, subsonic switch replacement, output relay replacement, solder repair, protector capacitor replacement, adjustment inspection, operation confirmation)
Accessories: No accessories
Main specifications: 80W+80W (8Ω) phono (MM/MC) switching dimensions W432 x H165 x D450 mm weight 18 kg
Maintained! The mid-range α series uses an α-X balance circuit that blocks the effects of noise and distortion from the ground. The smooth, stretchy sound quality is attractive. Designed with CD playback in mind, the sound separation is good, and it is a classic premain that will keep you entertained regardless of genre. There are line marks and threads on the exterior. Serial 437100950 (Fujisawa Yukishi)
Maintenance information: 2024.5.21 maintained (tone, source switch, MM/MC switch disassembly, polishing grease application, power amplifier circuit transistor, adjustment volume replacement, output relay replacement, power supply part solder repair and other main parts solder repair, each volume, switch cleaning, interior and exterior inspection and cleaning, operation confirmation)
Accessories: No accessories
Main specifications: 90W+90W (8Ω) W448 x H160 x D441 mm 16.0 kg
Maintained! A prime amplifier developed during the heyday of CDs and gained popularity. The powerful, punchy sound quality, which combines the quality of the mid-high range with the power of the low frequencies, is attractive. There is room not found in lower models, and you can enjoy the sound with a sense of scale typical of SANSUI. The appearance is fine, with no noticeable scratches, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.5.21 maintenance completed (tone and other switch disassembly polishing grease application (loudness, turnover, subsonic, muting, processor, input selector, power amplifier direct, source direct, tape, reckout switch), output relay, headphone relay replacement, power supply transistor replacement, power amplifier circuit transistor replacement, resistor, adjustment volume replacement, solder repair , interior and exterior inspection and cleaning, bias, DC adjustment, confirmation of each input/output, operation inspection)
Accessories: copy of instruction manual
Main specifications: Advanced α-X circuit equipped with 160W+160W (8Ω) damping factor 150 (8Ω) Phonomm/MC compatible W460 x H159 x D446 mm weight 33 kg
A long-selling Technica model that includes a shell and cartridge. The sound quality is clear and bright, and it makes popular music in general bouncy. The exterior has a feeling of use such as dullness (Jun Tamai)
Maintenance information: 2024.5.21 sound output confirmed
Accessories: original box
Main specifications: VM type playback frequency band 20 to 20,000 Hz output voltage 5 mV needle pressure 1.5 to 2.5 g H26 x W36 x D67.5 mm dead weight 19.5 g (including shell)
The price has been drastically reduced. 2024/5/20 sales price 198,000 yen Kappa series improved model Renaissance 90. The mid-high range is composed of EMIM and EMIT special units, and the sound is extremely delicate and clear. The deep sound field space and glossy, moisturized mid to high frequencies are unique to ribbon units. It has high resolution throughout the entire range and is suitable for classical and vocal styles. There are small scratches and line wounds, and there are repair marks of broken decorative plates at the foot (Oikawa Tetsuji)
Maintenance information: 2013.12.15 Maintained (exterior repair and cleaning. (Back side urethane deteriorated, replaced with substitute urethane)
Accessories: spikes
Main specifications: 4 way 4 speakers sealed floor type EMIT tweeter EMIM mid-range ribbon type 87dB 4Ω 250W W435 x H1245 x D315 mm 35.8 kg