Internally and externally maintained! This is the second generation of Tannoy's famous machine ARDEN. The warm and soft tone is attractive. It plays all kinds of music lusciously and gently. In particular, it works great with vacuum tube amplifiers, and the sense of orchestra scale and smooth playback of stringed instruments are satisfying enough to listen to. The exterior has been beautifully finished due to exterior maintenance. Serial 011093 016017 (Tomonori Asaine)
Maintenance information: 2024.4.18 Maintained (exterior repair/polishing/oil finish front and rear baffle/hakama repair/paint saran frame reinforcement painting/net replacement, batch polishing unit maintenance (high frequency magnetic circuit/in-gap cleaning/center adjustment diaphragm gap indirect attachment) ATT cleaning unit detachable)
Accessories: saran net
Main specifications: 2 way, 1 speaker, bass reflex system, floor type specification unit 3828, crossover frequency, 1 kHz, output sound pressure level, 91.5 dB, 8 ohms, dimensions W660 x H990 x D370 mm, weight 43 kg/book
Full internal and external maintenance completed in 2022! This is the second generation of Tannoy's famous machine ARDEN. The warm and soft tone is attractive. It plays all kinds of music lusciously and gently. In particular, it works great with vacuum tube amplifiers, and the sense of orchestra scale and smooth playback of stringed instruments are satisfying enough to listen to. The exterior has some impact scratches and board repair marks on one side of the hakama part. Serial 003354/003047 (Fujisawa Yukishi)
Maintenance information: 2022.9.23 Maintained (terminal screws, rust removal, acid washing, cleaning. Internal connection terminal (faston) replaced with a new one. ATT (SW type) contact cleaning. A frequency characteristic measurement check (~ 42 kHz) was performed, and the original capacitor was continuously used because the results were good. Check the input/output waveform and balance, and check the sound output. Unit maintenance (high range side: magnetic circuit gap cleaning/center adjustment) exterior repair/polishing/oil finish. Front and rear baffles/hakama repair/painting Saran net replacement)
Accessories: saran net
Main specifications: 2 way, 1 speaker, bass reflex system, floor type specification unit 3828, crossover frequency, 1 kHz, output sound pressure level, 91.5 dB, 8 ohms, dimensions W660 x H990 x D370 mm, weight 43 kg/book
The price has been drastically reduced. 2024/5/12 sales price 99,800 yen It has a well-balanced connection between all bands and a good sense of localization, and the three-dimensional grasp of sound is simple and can be reproduced with high quality. I think the AV settings are good along with the other Platinum series, but I think you can enjoy it regardless of genre even with 2CH as it is. There are 2 dents on the exterior and top plate, and a feeling of use can be seen such as dullness, abrasions, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.5.10 Operation confirmed
Accessories: zipper cross grill
Main Specifications: Input 20-150W Allowable Input (RMS) 75W Maximum Allowable Input (Instantaneous) 300W Efficiency 87dB (1W/1m) Impedance 8Ω Frequency Characteristics 40Hz to 20kHz (-6dB) LF (Woofer) 165 mm (6.5 inch), Multi-fiber Paper Cone MF (Mid) 165 mm (6.5 inch) HF (Tweeter) 25.4 mm (1 inch) Silk Dome Tweeter Crossover Type 3 Way, low loss passive type, hardwired crossover frequency 350Hz, 2.5kHz enclosure type bass reflex W235×H1,078×D300mm 17.1 kg
The disposal price has been reduced! (Member discounts are not applicable) 2024/3/7 sales price 398,000 yen Exterior maintenance completed! Replace network capacitors with SOLEN film capacitors. The unit is DENTECH Tune HDP385, and the enclosure is made by Shinkosha. The unit is attached by removing the back plate, and the net does not come off the front. Classical music also goes well with symphonies. The exterior is generally beautifully finished due to maintenance. Serial AYT71012 AYT71012 (Tomonori Asaine)
Maintenance information: 2024.3.7 Maintained (exterior repair/cleaning
Rear baffle paint saran net replacement unit maintenance (exterior cleaning, low range center adjustment, screw tightening, high frequency magnetic circuit slit cleaning/center adjustment) ATT cleaning/knob adjustment unit detachment)
2015.5.14 Maintained (network capacitors replaced with SOLEN. Unit edge replacement. Magnetic circuit overhaul and operation adjustment. Saran net partial cleaning net tear repair, complementary color correction)
Accessories: none
Main specifications: used unit HPD385 frequency characteristics 20Hz to 20kHz allowable input 85W 92dB 8Ω W600 x H1075 x D380 mm approx. 42 kg/bottle
The price has been reduced! 2024/4/21 sales price 4,500 yen This is a genuine wood wax for TANNOY speakers. Approximately 10% have been used. Since fixation due to aging can be seen, quality cannot be guaranteed (Hiroki Aso)
Accessories: original box
Both the interior and exterior have been fully restored and refreshed! This is the second generation of Tannoy's famous machine ARDEN. The warm and soft tone is attractive. It plays all kinds of music lusciously and gently. In particular, it works great with vacuum tube amplifiers, and the sense of orchestra scale and smooth playback of stringed instruments are satisfying enough to listen to. It is beautiful due to exterior repairs (Sasaki Shota)
Maintenance information: 2024.5.10 Maintained (exterior repair/polishing/oil finish. Front and rear baffles/hakama repair/painting. Saran net replacement/frame repair/reinforcement. Unit maintenance: low range/edge exchange, magnetic circuit gap cleaning/center adjustment, high pass/magnetic circuit rust removal/gap cleaning/center adjustment. Network maintenance: frequency characteristic check, ATT cleaning, faston terminal replacement, terminal cleaning)
Accessories: none
Main specifications: 2 way, 1 speaker, bass reflex system, floor type specification unit 3828, crossover frequency, 1 kHz, output sound pressure level, 91.5 dB, 8 ohms, dimensions W660 x H990 x D370 mm, weight 43 kg/book
Power transformer primary: 100-105V secondary: 24-0-24V/0.18A, 6.3V/0.6A, 25-22.5-20-0-20-22.5-25V/2.6A W100 x H80 x D84 mm 3.2 kg (actual measurement, not including protrusions) There is dullness and abrasions on the body with stays (Kojima Yosuke)
Accessories: stay (main unit attached)
Output transformer sale push pull output 40W primary: 5KΩ secondary: 4-8-16Ω W84 x H119 x D79 mm 2.3 kg/piece No TANGO badge, there are abrasions and line scratches in places (Kojima Yosuke)
Accessories: none
The price has been drastically reduced. 2024/4/18 sales price 89,800 yen TANGO input transformer, line transformer using NN-600-600. The overall sound resolution is increased, and the sense of sound pressure is also enhanced. Recommended for those using speakers with horn drivers. TANGO badges are discolored, and there are tape marks and bumps on the chassis (Kojima Yosuke)
Maintenance information: 2024.4.18 Operation confirmed
Accessories: none
Main specifications: primary impedance 600 Ω (150 Ω split) secondary impedance 600 KΩ (150 kΩ split) primary inductance 70H W140 × H110 × D100 mm 1.8 kg (actual measurement, not including protrusions)
Choke transformer 3H/210mA DC resistance 55Ω (actual measurement 52.9 Ω) W50 x H82 x D57 mm approx. 0.8 kg (actual measurement, not including protrusions) original box, with TANGO badge (Kojima Yosuke)
Accessories: original box, TANGO badge
Output transparent pair for push-pull output 40W primary: 10 kΩ secondary: 4-8-16 ohms Usage: VT-62, VT-25, 6F6, 6V6, etc. W83 x H105 x D78 mm approx. 2.3 kg/piece (actual measurement, not including protrusions) with original box with scuffs and tape marks in places (Kojima Yosuke)
Accessories: original box
Unused item! Power supply/heater transformer custom product primary: 100V secondary: 5V/3A, 6.3V/2.5A, 600-550-535-0-80-535-80-535-550-600V/0.17A, CT-5V/1.5A × 2 W122 x H87 x D105 mm 5.3 kg (actual measurement, not including protrusions) mounting nut with original box (Kojima Yosuke)
Accessories: mounting nuts, original box
※Only 1 network coil attenuator Orient Hi-B cut core attenuation -1 to -20 dB (1 dB interval) maximum input 300 W usage frequency 200 Hz or more, line diameter 1.2 mm, W85 x H72 x D75 mm, approx. 1.1 kg/piece There is distortion in the washer part (Kojima Yosuke)
Accessories: none
Input transformer pair sale primary impedance 600 Ω (150 Ω split) secondary impedance 600 KΩ (150 kΩ split) primary inductance 70H W50 × H70 × D57 mm 0.75 kg/piece (actual measurement, not including protrusions) The badge is discolored, and there are scratches in places (Kojima Yosuke)
Accessories: specifications
Unused item! (Opened to confirm continuity) Power transformer primary: 100-105-110V secondary: 22-25V/AC5.5A x 2 (Bridge DC3.2A), 5.5V/AC1A x 2 W120 x H140 x D100mm 5.5 kg original box, with instructions, fixed stay, and fixing nut (Kojima Yosuke)
Accessories: original box, manual, fixed stay, fixed nut
Unused item! Power supply/heater transformer custom product primary: 100V secondary: 5V/3A, 6.3V/2.5A, 600-550-535-0-80-535-80-535-550-600V/0.17A, CT-5V/1.5A × 2 W122 x H87 x D105 mm 5.3 kg (actual measurement, not including protrusions) mounting nut with original box (Kojima Yosuke)
Accessories: mounting nuts, original box
Unused item! (Opened to confirm continuity) Power transformer primary: 100-105-110V secondary: 22-25V/AC5.5A x 2 (Bridge DC3.2A), 5.5V/AC1A x 2 W120 x H140 x D100mm 5.5 kg original box, with instructions, fixed stay, and fixing nut (Kojima Yosuke)
Accessories: original box, manual, fixed stay, fixed nut
Unused item! Power supply/heater transformer custom product primary: 100V secondary: 5V/3A, 6.3V/2.5A, 600-550-535-0-80-535-80-535-550-600V/0.17A, CT-5V/1.5A × 2 W122 x H87 x D105 mm 5.3 kg (actual measurement, not including protrusions) mounting nut with original box (Kojima Yosuke)
Accessories: mounting nuts, original box
Power transformer primary: 100-105V secondary: 24-0-24V/0.18A, 6.3V/0.6A, 25-22.5-20-0-20-22.5-25V/2.6A W100 x H80 x D84 mm 3.2 kg (actual measurement, not including protrusions) There is dullness and abrasions on the body with stays (Kojima Yosuke)
Accessories: stay (main unit attached)
※Sold as 1 piece output transformer for single output 7W hammer tone color primary: 5 kΩ secondary: 4-6-8 Ω W50 x H81 x D58 x 57 mm 0.86 kg (actual measurement, not including protrusions) with original box (Kojima Yosuke)
Accessories: original box
Output transformer sale push pull output 40W primary: 8 kΩ secondary: 4-8-16 Ω W83 x H104 x D 78 mm 2.3 kg/piece There are abrasions and line scratches in places (Kojima Yosuke)
Accessories: none
Power transformer primary: 100V secondary: 5V/3A, 2.5-6.3V/5.2 A x 2, 6.3V/3A, 360-400-450V/170mA W120 x H95 x D105 mm 5.3 kg (not including protrusions) There are abrasions and line scratches in places (Kojima Yosuke)
Accessories: none
※Since it is inexpensive, it will be handed over as is. Tamban 10cm full range unit. An ultra-thin PP diaphragm with reinforced ribs is used. The sound is clear and crisp. A 6-8 liter bass reflex box is recommended (Tamura Eiji)
Maintenance information: 2023.10.1 sweep check OK
Accessories: none
Main Specifications: Rubber Edge Impedance 4 Ohms Sound Pressure Level 87 dB Frequency Band 63 to 17,000 Hz Maximum Input 40 W Baffle Aperture Diameter 94 mm Weight 380 g
Line matching transformer sold 1 piece Primary: 600 Ω - CT Secondary: 600 ohms Output 10 dBm Frequency Range 50 to 10 kHz W44 x H65 mm 0.25 kg/piece There are bumps and paint peeling in places (Yosuke Kojima)
Accessories: none
Unused item! Power transformer primary: 90-100-110V secondary: 6.3V/3A x 2, 400-325-0-325-400V/230mA, 5V/3A W122 x H150 x D102 mm 5.4 kg (actual measurement) (Kojima Yosuke)
Accessories: none
* It seems to be an output transformer from the specifications; sold 1 piece, primary: 10 kΩ, secondary: 600 ohms, W76 x H71 x D43 mm, 0.6 kg (actual measurement, not including protrusions), there is paint peeling in places (Kojima Yosuke)
Accessories: none
* Since there are difficulties with the attachment part on both sides, it is inexpensive. Line matching transformer sold primary: 600 ohms, output 10 dBm, frequency range, 50 to 10 kHz, W44 x H65 mm, 0.25 kg/piece, the head of the mounting bolt on one side is flying off, and there is distortion in the screw hole on the other side (Kojima Yosuke)
Accessories: none
Choke transformer 10H/120mA DC resistance 110Ω (actual measurement 112.2Ω) W68 x H91 x D71 mm 1.6 kg The paint is peeling off in places, and there are rust stains (Kojima Yosuke)
Accessories: none
Screwdriver Transpair sale 1st order: 5 kΩ 2nd order: 5 kΩ CT/1.25 ksplit DC30mA 50 to 15 kHz output level 30dBm W76 × H83 × D44mm 0.7 kg (actual measurement, including protrusions) One side with original box seems to be an unused item due to the state of the terminal! (KOJIMA Yosuke)
Accessories: original box
Output transformer sold 1 piece Primary: 14 kPPΩ Secondary: 600 Ω WW76 × H71 × D43 mm 0.6 kg (actual measurement, protrusions not included) There are paint peeling and seal marks in places (Kojima Yosuke)
Accessories: none
Line matching transformer sold 1 piece Primary: 600 Ω Secondary: 600 Ω Winding Ratio 1:1 Output 10 dBm Frequency Range 50 to 10 kHz W34 x H42 x D22 mm Approx. 0.1 kg (Yosuke Kojima)
Accessories: none
Pair tube, metal, brown base, made in America, measured value 66/64 (rejected value 44) with original box (some written), sticker is attached to the base part, and there is a getter burn ※ The pair was determined based on the GM value measured with the test machine TV-7 (Kojima Yosuke)
Accessories: original box