The price has been reduced! 2023/6/24 sales price 178,000 yen Maintenance has been carried out and deteriorated capacitors etc. have been replaced! A newly created power supply is included. Genuine RF MC cartridge head amplifier The RCA terminal specification makes it easy to use, and has a separate power supply structure. The delicate, clear, and powerful sound is attractive (Daiki Goto)
Maintenance information: 2023.6.24 maintained (new power supply manufactured because the power module is defective but cannot be repaired, all deteriorated capacitors replaced, pin jack deterioration replaced, gain changeover switch replaced due to poor contact, each gain readjusted, operation inspected, (there are no current problems with the module)
Accessories: copy of instruction manual
Main specifications: Gain can be adjusted in 3 levels; input impedance can be used up to 45 ohms W175 x H60 x D210 mm 1.4 kg
The disposal price has been reduced (member prices are not applicable). 2024/2/16 sales price 378,000 yen ※The power supply part has been newly created. Other internally deteriorated parts have been restored! 2-way 100Hz specification An electric crossover coveted by Mark Levinson fans. You can see how well the early Levinson was built can be seen from the feel of the knobs that seem to make you addicted. You can listen closely to Levinson's unique sounds even on Divider. The exterior has scratches on the front top plate and other threads (Mizusaki Ryo)
Maintenance information: 2024.2.16 Maintained (*Since there is no power source, new power supply and connection cable were manufactured, noise appears in the LChLow output, transistor defects in the low pass module were replaced, re-encapsulated, readjusted due to left and right level differences, 4 volume contacts were cleaned, specs were inspected, and blocking characteristics were inspected. The crossover is 100Hz)
Accessories: Power supply unit (newly created, non-genuine), power cable, copy of instruction manual
Main specifications: 2 way (100 Hz specification) closed module type RCA Remo input/output size (main unit) W483 x H51 x D156 mm 2.8 kg size (power supply part) W101 x H101 x D256 mm 2.2 kg
It was maintained in 2019. A special edition of the PM-80. A popular Marantz model from the 90s that has both luster and strength. This is a geeky model where you can enjoy the difference in tone by switching between A grade and AB grade. There is a feeling of use, dullness, and small scratches. Serial MZ009046030013 (Murakoshi Yoichi)
Maintenance information: 2019.7.11 maintenance completed (speaker relay replacement, source/TAPE switch push button SW6 wear replacement, other MM/MC switching SW/INPUT selector switch SW disassembly contact polishing cleaning, idling CLASS A · B confirmation adjustment, confirmation of solder cracks on each board, partial repair, confirmation of sound output for each input/output connection)
Accessories: instruction manual (copy)
Main specifications: AB class 100W+100W (8Ω) A grade 20W+20W (8Ω) size W454 x H165 x D380 mm weight 17.5 kg
LUXMAN's classic line selector. It is an easy-to-use and convenient model that outputs from 1 input system to 4 systems, and conversely, outputs from 4 input systems to 1 system. The exterior has been changed to dullness and rubber feet. Serial 20220398 (Tamura Eiji)
Maintenance information: 2024.6.6 operation confirmed
Accessories: none
Main specifications: 1 system, 4 systems input/output W160 x H65 x D95 mm, 530 g
Full maintenance was carried out to replace all deteriorated parts such as capacitors and vacuum tubes! 38 FD, the most popular of the 38 series, is now in stock! The warm tone has plenty of warmth in the bass and mids, and you can enjoy the true essence of lackstone, where you can enjoy the afterglow of the tone. The exterior has a beautiful finish due to exterior maintenance, but rust etc. on the back remain. Serial 101 20007 (Tomoho Asaine)
Maintenance information: 2024.6.6 maintained (parts replacement, input/output waveform check, load test (1kHz sine wave, 8Ω load: 30W+30W, OK), sound output test) 2020.4.2 maintained (vacuum tube (50CA10), electrolytic capacitor, block electrolytic capacitor, coupling capacitor, vacuum tube socket, headphone jack, micro switch, rectifier diode, semi-fixed resistor, fuse replacement. Complete disassembly of SW/VOL contacts, polish, and apply grease to prevent oxidation and sulfidation. Circuit readjustment, input/output waveform confirmation, load test (1kHz sine wave, 8Ω load: 30W+30W), distortion adjustment (maximum output: 0.2%), sound output test)
Accessories: manual copy power cord
Main specifications: 30W+30W (4, 8, 16 ohms) line input 4 systems phono 2 systems (mm) W476 x H190 x D335 mm 18 kg
The disposal price has been reduced. Member discounts are not applicable. 2024/5/31 sales price 138,000 yen Manufacturer maintained! Long-established Luxman compact vacuum tube type premain. The neat design and simple operability make you feel like it's a new era, but it has a sturdy finish that is warm and new, such as adopting a traditional OY type transformer. The sharp vacuum tube sound is attractive. There are line marks on the exterior and top surface, and dullness all over (Murakoshi Yoichi)
Maintenance information: 2024.5.29 manufacturer maintenance (BASS, TREBLE volume replacement. Input selector switch contact cleaning, inspection of each part, general adjustment)
Accessories: remote control, power cable, original box
Main specifications: rated output 12W+12W (6Ω), 10W+10W (8Ω/4Ω) vacuum tube ECC83 x 1, ECC82 x 2, EL84 x 4, 3 input lines, Phono (MM compatible) 1 system frequency characteristics 20 Hz to 50 kHz W297 x H162 x D258 mm 11.5 kg
The disposal price has been reduced. Member discounts are not applicable. 2024/5/25 sales price 248,000 yen It now uses Alnico, which can be called premium, and the tuning that emphasizes musicality that is comfortable to listen to throughout the entire area makes a good impression. The visuals are also compact and elegant, and have a sense of luxury. The appearance is fine, with no noticeable scratches, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.5.25 Operation confirmed
Accessories: saran net, jumper cable
Main specifications: 2WAY sealed 35mm pure silk ring diaphragm tweeter 170mm Kurt Mueller cone woofer rated input 50W maximum input 150W output sound pressure level 87dB impedance 6Ω crossover 3,500 Hz playback band 40 to 50,000 Hz W224 x H380 x D319 mm 10.8 kg
A model that inherits the lineage of 4312. The sense of speed and range has been improved with a completely renewed unit, and it has been transformed into a high-fidelity speaker that can play all kinds of sources with a clean sound with good damping. There is a light thread on the top of the exterior. Serial 13466 13432 (Murakoshi Yoichi)
Maintenance information: 2024.6.6 sound output confirmed
Accessories: saran net
Main specifications: 3-way 3-speaker bass reflex impedance 6 ohms playback frequency band 45 Hz to 35 kHz output sound pressure level 93 dB size W362 x H597 x D299 mm weight 17 kg
Famous machines from yesteryear have been revived due to the creation of a new Saran Net and internal and external refreshment maintenance! Middle monitor walnut specification. The punchy bass and sharp, smooth mid-range are all very attractive models. In contrast to modern JBL speakers, listening to jazz with a thick mid to low range sound is excellent. Serial 72329/72332 (Murakoshi Yoichi)
Maintenance information: 2024.6.6 maintenance (exterior repair/polishing/oil finish
Front and rear baffle repair/painting, new saran net created. Unit maintenance: woofer cone paper painting/center cap dent repair on one side, mid cone paper coating/center cap dent repair on one side, TW cone paper/frame coating. Network maintenance: frequency characteristic check, ATT cleaning, terminal cleaning)
Accessories: saran net
Main specifications: Way3 speaker front bass reflex type sound pressure level 91 dB impedance 8 ohm crossover frequency 1.5 kHz/6 kHz playback frequency band 45 to 15,000 Hz W362 x H597 x D298 mm 20 kg/book
This is a standard JBL monitor that has undergone internal and external maintenance and has been refreshed. The darker and thicker tone compared to the current model still doesn't even seem to be declining in popularity. The thick, exhilarating sound goes well with jazz and rock, and the punchy sound becomes a habit. The exterior is in a beautiful state due to maintenance. Serial 32648 32951 (Yamato Yuki)
Maintenance information: 2024.6.7 operation confirmed
2021.10.15 Maintained (exterior cleaning/repair saran frame painting/net replacement cone paper touchup/tweeter grill dent correction ATT cleaning unit detachable)
2012.1.27 Maintained (ATT replacement, capacitor replacement, input/output waveform and balance check, sound output check, frequency characteristic measurement, front baffle repair (touch-up painting), exterior cleaning, plate attachment (not completely flat because there were already quite a few wrinkles)
Sound output test)
Accessories: saran net
Main specifications: 3-way 3-speaker bass reflex system frequency characteristics 45 Hz to 20 kHz sound pressure level 93 dB impedance 8 ohms allowable input 100 W dimensions W362 x H597 x D298 mm weight 20 kg/1
Internal and external maintenance has been applied and brushed up! JBL 40th anniversary model! A reprint model of the L101. You can enjoy the excellent sound unique to horn drivers. It has a good response and is a spacious speaker that can be matched with music of a wide range of ages. The traditional lattice net design is also attractive. There is slight discoloration on the marble (Murakoshi Yoichi)
Maintenance information: 2024.5.29 maintenance (exterior repair/polishing/oil finish
Front and rear baffles/hakama repair/painting. Lattice repair/polishing/painting, lining replacement. Woofer edge replacement. Driver maintenance (magnetic circuit gap cleaning center adjustment). Network maintenance (frequency characteristic check, ATT cleaning).)
Accessories: lattice
Main specifications: 2 way · 2 speakers · bass reflex system · floor type frequency characteristics 35 Hz to 16,000 Hz directional characteristics (horizontal x vertical) 90 degrees x 40 degrees sound pressure level 92 dB 8 Ω allowable input 150 W crossover frequency 900 Hz enclosure volume 53.5 L W445 x H629 x D320 mm 29.1 kg/book
JBL's exponential horn. Since it is a longhorn, it can be used at low crossover frequencies. Together with an acoustic lens, it is possible to create a monitor sound with high directivity. There is light rust on the mounting surface. Serial 6754/3758 (Murakoshi Yoichi)
Accessories: none
Main specifications: crossover frequency 800 Hz sound pressure level 108 dB (using 2308 lenses) throat diameter 2.5 cm diameter 156 x D 293 mm weight 1 kg/book
※It is inexpensive because it has cracks. An acoustic lens mounted on JBL monitor speakers such as the 4343 series. By wearing it, the sound of the horn, which is too strong, is moderately diffused and calmed down. There is dirt and dust on the exterior (Tamura Eiji)
Accessories: none
A cutting-edge unit installed in the high-end model K2 S9800. The unit alone is also highly evaluated, and it stretches flat to a very high range, and it is a dynamic sound. The exterior is good with no conspicuous scratches. Serial 01502, 010030 (Yonejima Satoshi)
Maintenance information: 2024.6.6 sweep test is good
Accessories: No accessories
Main specifications: 15inch pure pulp cone woofer with Alnico 5DG magnet 8Ω 400W playback frequency band 20Hz to 2kHz minimum resonance frequency 26 Hz 94 dB recommended crossover frequency 800 Hz outer diameter 387 mm x depth 235 mm 18 kg
The price has been reduced! 2024/5/13 sales price 59,800 yen ※ It is cheap because chips and oxidation are conspicuous in the horn part. A tweeter representing JBL. It gives an expression with a greater sense of depth and expansion than 075. It has a punchy, dynamic sound quality, and is a model unique to this era that excelled in characteristics such as a sense of attack and horsepower. The exterior has dullness, rust, and scratches due to aging. Serial 33996/33998 (Yonejima Satoshi)
Maintenance information: 2024.5.13 good oscillator test
Accessories: No accessories
Main specifications: horn type ferrite magnet playback frequency band 2,500 to 15,000 Hz impedance 8 ohms output sound pressure level 110 dB diameter 119 x depth 94 mm weight 2.4 kg
The disposal price has been reduced! (Member discounts are not applicable) 2024/5/25 sales price 148,000 yen Speaker that has acquired wideband playback and high dynamic range. Equipped with a special tweeter Emit-B that fits in the high range, it achieves high frequency reproduction over 45 kHz and a clean, tight low frequency response. The exterior is dull and has small scratches, broken dowels on the saran net, and some repair marks remain on the woofer center cap. Serial 03144 03972 (Tomonori Asae)
Maintenance information: 2024.5.25 sound output confirmed
Accessories: Saran net jumper cable (general purpose) spike
Main specifications: frequency characteristics 30 Hz to 45 kHz ± 2 dB crossover frequency 250 Hz, 800 Hz, 3.5 kHz sensitivity 89dB/2.8V/1m input impedance 4Ω recommended amplifier output 50W to 400W external dimensions W430xH1,480xD430 mm weight 59 kg
※Woofer cones are highly deformed, so they are inexpensive. Maintained in January 2024! It is a Harves speaker with increased appeal, such as the richness of the sound typical of an HL MONITOR. The Harves-like sound, which is characterized by a relaxed sound in addition to the mid-range density unique to those made in England, is attractive. Exterior maintenance has been carried out on the exterior, but in addition to scattering repair marks, there is a feeling of use over time, such as undulations on the woofer edge. *Saran net is not included. Serial 3349A 3349B (Tomonori Asaine)
Maintenance information: 2024.6.6 exterior repair maintenance (exterior chip repair (conspicuous areas only), front baffle painting) 2024.1.12 maintained (exterior repair stain colored front baffle repair polishing paint rear baffle cleaning
Woofer edge repair, protective agent application (with undulations), terminal replacement unit, detachable tweeter, corrosion, disconnection repair, diaphragm, dome coat treatment, 1 voice coil, bobbin deformation correction)
Accessories: none
Main specifications: 2 way 2 speakers, 22.5 cm cone woofer/2.5 cm soft dome tweeter impedance 8 Ω crossover 2,000 Hz sound pressure level 87 dB, W325 x H640 x D330 mm, 13.5 kg
※It is inexpensive because there are many scratches and there are no second-tier metal fittings at all. The horizontal rack can be used for a wide range of purposes, such as for AV on televisions, etc., and for audio. Compatible with a total load capacity of up to 300 kg. There is a feeling of use such as scratches. ※Shipping costs will be estimated separately (Daiki Goto)
Accessories: none
Main specifications: load capacity: top plate 150 kg or less, shelf board 50 kg or less, bottom plate 50 kg or less W1,165 x H492 x D580 mm weight 62 kg
It is a grace shell characterized by a fin shape. Lightweight yet hard, highly rigid shell (Asaine Tomoho)
Maintenance information: 2024.6.2 continuity confirmed
Accessories: No accessories
Main specifications: carbon fiber dead weight 10.7g
The price has been reduced! 2024/6/2 sales price 79,800 yen Special arm base for attaching the GLANTZ tonearm MH-1200S to the LUXMAN record player PD-191A. Attach it to the back left side of the PD-191A main unit. The exterior is generally good (Takahashi Nobuyuki)
Accessories: mounting screws
Main specifications: Material stainless steel W128 x H15 x D128 mm 787 g (actual measurement)
The price has been drastically reduced. 2024/1/13 sale price 99,800 yen rare Gauss 46cm woofer! This is the first model to arrive at Hi-Fi. Unlike JBL woofers, it is characterized by sound tightness and strength of extrusion. It also seems interesting to use it as a 4345 woofer (Sasaki Shota)
Main specifications: Ferrite magnet 46cm woofer impedance 8Ω (measured DC resistance value 6.3Ω, 6.0Ω) 8.7kg (actual measurement)
The price has been drastically reduced. 2024/6/2 sales price 498,000 yen straight pipes, only lightweight weights are included, and the armrest is an external item, so it's cheap. Maintained! EXCLUSIVE's popular analog player. The inside of the thick cab is structured so that the motor part and tone arm part float. When you actually play it, the effect is tremendous, and it brings out the sound of the record to the extreme. The exterior is broken in the corner of the dust cover, chipped glass, and finger tips are substitutes, and a feeling of use can be seen (Kobayashi Hitoshi)
Maintenance information: 2024.6.2 maintenance completed (START, disassembly and cleaning in other buttons, servo circuit electrolytic capacitor replacement, rotation lock position adjustment, arm damping grease cleaning replacement, turntable height adjustment, armrest replacement (structure is different). (Arm operation, voice check)
Accessories: straight pipe, lightweight weight, instruction manual (copy)
Main specifications: linear torque DC Hall motor direct drive dynamic balance type arm needle pressure adjustment range 0 to 3 g W600 x H267 x D415 mm 45 kg
The price has been drastically reduced! 2024/6/1 sales price 148,000 yen A center speaker that develops ELAC's new-generation quality into multi-channel. It can easily handle the latest multi-channel sources that require huge amounts of information from the center channel. The exterior has line scratches on the TW periphery and threads on the top plate. Serial 0614 (Yonejima Satoshi)
Maintenance information: 2024.6.1 sweep check is good
Accessories: saran net
Main specifications: center speaker, 2.5-way bass reflex, efficiency, 89dB, impedance, 4Ω, frequency characteristics, 32 to 50,000 Hz, crossover frequency, 450/2,400 Hz, maximum input, 160 W, W650 x H204 x D314 mm, weight: 14 kg
DS-E1 is the entry model for optical cartridges. The mechanism captures the movement of the needle as a change in light and outputs it, and reproduces sound quality with excellent separation and high resolution. The exterior is slightly dull on the body*A dedicated equalizer is essential for use (Ryo Mizusaki)
Maintenance information: 2024.6.7 operation confirmed
Accessories: original box, catalog, wrench
Main specifications: DS-E1: aluminum cantilever, machined aluminum body, output voltage of 500 mV or more, needle pressure 1.6 g to 1.8 g, weight 8.1 g
Woofer edge softening treatment! One of DIATONE's most popular speakers. The sharp high resolution line started with this speaker. It is a speaker representing DIATONE, which is delicate and has high transparency, and by successfully combining amplifiers, it is a very high quality speaker even now. The exterior has chipped veneer, stains, and scratches. Serial 15112, 15119 (Fujisawa Yukishi)
Maintenance Information: 2024.6.7 Maintained (woofer edge softening treatment)
Accessories: saran net
Main specifications: 3 way, 3 speakers, sealed bookshelf type, 6 ohms, playback frequency band, 28 Hz to 40,000 Hz, output sound pressure level, 90 dB, crossover frequency, 500 Hz/4.5 kHz, rated input 60 W, maximum input, 180 W, W410 x H710 x D362 mm, 38 kg
The disposal price has been reduced! Member prices are not applicable. 2024/6/2 sales price 128,000 yen Woofer edge softening treatment! Comes with a genuine stand DK-1000ZX (list price 50,000 yen). Standard diamond tone model. The characteristics of the Boron scoker, which is strong and has a good sound, shine through. The tight low range with supple stretch is a sound unique to Diatone. You can enjoy excellent sound regardless of genre. The exterior has small scratches and dullness. ※Saran net is out of stock. Serial 14308/14315 (Fujisawa Yukishi)
Maintenance Information: 2024.6.2 woofer edge softened
Accessories: Genuine stand DK-1000ZX ※Saran net missing
Main specifications: [DS-1000ZX] 3 way 3 speaker sealed type 6.3 ohm output sound pressure level 90 dB W360 × H690 × D341 mm 29 kg [DK-1000ZX] W360 × H195 × D300 mm 6.2 kg
The price has been reduced! 2023/12/1 sales price 298,000 yen Interior and exterior refreshment maintenance has been completed and brushed up! A consumer model of the 2S-305, a timeless monitor speaker masterpiece that Japan is proud of. The thick and clear midrange and detailed high frequencies, which cannot be felt with the look, vividly reproduce vocals. The sound that accurately expresses the characteristics of an amplifier that is set regardless of whether it is a vacuum tube or transistor makes me feel the goodness of the device I have on hand that I haven't been able to see until now. The exterior is in perfect condition due to maintenance. Serial 351364 4851370 (Yamato Yuki)
Maintenance information: 2023.12.1 Maintained (exterior polishing, oil finish, exterior repair, front and rear baffle painting to create missing parts, saran net replacement, velcro replacement. Woofer maintenance center adjustment, edge damping agent application, disconnection solder treatment, center cap dent correction. Tweeter maintenance center cap internal cleaning and replacement, center adjustment, corn paper edge crack repair, edge damping agent application, unit detachment. Network maintenance frequency characteristics check, ATT contact cleaning, terminal cleaning sound operation confirmed)
Accessories: saran net
Main specifications: 2 way bass reflex system input impedance 8 ohms output sound thickness level 96 dB crossover frequency 1500 Hz W650 × H880 × D445 mm weight 50 kg
Maintenance has been completed, such as edge softening treatment and exterior repairs. The successor to the DS-505 with a DUD boron dome in the high range. It is a model set to be the standard for the CD era, and the sound connection between each unit is smooth, and the sense of stability in the mid to low range is attractive. You can see a feeling of use, such as appearance, dullness, corrosion, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.6.4 maintenance (edge softening treatment, exterior repair/cleaning)
Accessories: saran net
Main specifications: 3-way 3-speaker bass reflex system 6 ohms playback frequency band 30 Hz to 40,000 Hz output sound pressure level 90 dB W390 x H720 x D377 mm 33 kg