The disposal price has been reduced. Member discounts are not applicable. 2024/11/29 sale price 100,000 yen This is an extremely rare original cone initial 803A woofer. This model was adopted for the company's speaker system 820C etc. in the 50s. Thanks to its high efficiency, its responsive, and crisp sound is attractive (Murakoshi Yoichi)
Maintenance information: 2024.11.29 sound output confirmed
Accessories: none
Key Specifications: 38cm woofer, 16 ohm fixed edge, 30 to 1600 Hz
Technics headshell with unknown model number. This shell is highly versatile and easy to use. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.11.10 continuity confirmed
Accessories: none
Main specifications: dead weight 7.1 g (actual measurement)
Maintained! Dynamic balance short arm The strong sound brings out the characteristics of the SPU-G shell type to the fullest. The exterior is dull. (YONEJIMA Satoshi)
Maintenance information: 2024.12.17 Maintained (broken shaft repair. Output cable RCA terminal deterioration replacement. continuity test.)
Accessories: connection cord
Main specifications: Dynamic balance type, total length: 300 mm, execution length: 228 mm, overhang: 16 mm, needle pressure range: 0 to 7.5 g, needle pressure range: 0 to 7.5 g, direct reading arm, base hole, 22 mm, cartridge dead weight: 7 to 32 g
Currently sold. ※1 bottle only. A tweeter representing JBL. It gives an expression with a greater sense of depth and breadth than 075. It has a punchy, dynamic sound quality, and is a model unique to this era that excelled in characteristics such as a sense of attack and horsepower. There is a feeling of use such as dull stains over time. Serial 20286 (Yamato Yuki)
Maintenance information: 2024.12.13 good oscillator test
Accessories: none
Main specifications: horn type ferrite magnet, playback frequency band, 2500 to 15,000 Hz, impedance 8 ohms, output sound pressure level, 110 dB, diameter: 119 x depth: 94 mm, weight: 2.4 kg
The price has been reduced! 2024/12/19 sales price 368,000 yen It is a mid-range model that has greatly improved the distortion characteristics and S/N performance mounted on the top-end model C-900U while pursuing the concept of a simple and high-quality control amplifier dedicated exclusively to line levels. There are dirt scratches and small scratches on the exterior. Serial GG41100105 (Tamura Eiji)
Maintenance information: 2024.12.19 Operation confirmed
Accessories: instruction manual, remote control, power cable, original box
Main specifications: 5 input amber H130 lance systems, 2 balanced systems, 2 unbalanced output systems, balance 2 system dimensions W440 x H130 x D430 mm, weight 14.6 kg
The price has been drastically reduced! 2024/12/17 sales price 348,000 yen Refreshed and maintained, including the exterior, in 2018! It is a model equipped with TANNOY's 10-inch unit HPD295 in the “TANNOY Cornetta Enclosure” planning kit for stereo sound magazines. The taste is slightly different from the original box, but you can enjoy a deep sound that fully brings out the potential of TANNOY and is perfect for classical music. There are small scratches on the exterior. Serial 10157, 10158 (Fujisawa Yukishi)
Maintenance information: 2018.5.18 maintained (exterior scratch repair/polishing/clear finish, front baffle painting, saran frame polishing/clear finish, saran net repaired/hakama repair/sheet attachment, terminal replacement [banana plug compatible product], ATT [SW type] cleaning, correction of capacitors and resistors according to HPD/295/8 specifications, input/output waveform and balance confirmation, sound output check, frequency characteristic measurement check [~ approx. 42 kHz])
Accessories: No accessories
Main specifications: 10inch coaxial 2-way unit frequency characteristics 22Hz to 20kHz output sound pressure level 90.5 dB impedance 8 ohms dimensions W835 x H1050 x D545 mm weight approx. 55 kg/1 bottle (actual measurement)
The price has been reduced! 2024/12/19 selling price 358,000 yen Luxman CD/SACD player. In addition to the ability to reproduce file sound sources via USB connection, it also has excellent sound quality that inherits the quality of the advanced D-08. It is a high-class player that combines conflicting elements of being thick yet sharp and has clear contours. There are scratches on the exterior. Serial 650300298 (Tamura Eiji)
Maintenance information: 2024.12.19 Operation confirmed
Accessories: instruction manual, remote control, power cable, original box
Main specifications: analog output/RCA x 1, XLR x 1 digital output/coaxial (RCA) optical (TOS) x 1, digital input/coaxial (RCA) x 1, optical (TOS) x 2 USB TYPE-B dimensions W440 x H133 x D410 mm weight 15.7 kg
※ Genuine spikes are being arranged (please note that the delivery time is about 1 to 2 months. We will send it as soon as it is in stock). This is a relatively low-priced tall boy speaker among Magico's. The stylish design matches any location, such as an audio room or living room. You can enjoy high-end sound at an affordable price. It sounds in a well-balanced manner with clear and fresh high frequencies and a good sense of volume, yet comfortable to listen to without bulging too much. The resolution of sound that cannot be enjoyed with speakers in wooden cabinets is unique to metal housings. This is an elegant speaker that is clear and has high clarity. Serial 002057, 002058 (Fujisawa Yukishi)
Maintenance information: 2024.12.20 Operation confirmed
Accessories: ※Genuine spikes are being arranged (please note that the delivery time is about 1 to 2 months. (We will send it as soon as it is in stock)
Main specifications: 3 way 4 speaker efficiency 88dB impedance 4Ω playback frequency band 26Hz to 50kHz W273 x H1,126 x 329 mm 50 kg
The price has been reduced! 2024/12/19 sales price 648,000 yen In addition to the high resolution unique to B&W, the sound with finer and smoother particles than before and a large sound field are attractive. The degree of perfection is astonishing, and it sounds more than its size. The range and depth are overwhelmingly excellent, the piano trio swings lightly, and the vocal system is a versatile type with a moist tone. There are some scratches on the exterior. Serial 0006695/0006696 (Tamura Eiji)
Maintenance information: 2024.12.19 sweep check OK
Accessories: saran net, jumper cable, instruction manual
Main specifications: 2-way 2-speaker bass reflex type frequency band 34Hz to 35kHz 88dB 8Ω unit configuration · 25mm diamond tweeter x 1, 165mm continuous cone DST midrange x 1 W238 x H424 x D345 mm 12.6 kg/book
Balance cable 1.0 m pair of high-purity oxygen-free copper is a hybrid of 4 different wire types and different wire diameters with a unique golden ratio. It is an attractive cable with balanced broadband playback and high resolution (Tamura Eiji)
Maintenance information: 2024.12.12 continuity confirmed
Accessories: none
The price has been reduced! 2024/12/19 sales price 398,000 yen It has acquired instantaneous power reality of up to 960W from 120W (8Ω), which pursues drivability for all speakers, and is compatible with pure A class operation up to 6W with bias current settings. A masterpiece that combines rich musical expression with high power. There are dirt and scuff marks on the exterior. Serial M41100076 (Tamura Eiji)
Maintenance information: 2024.12.19 Operation confirmed
Accessories: instruction manual, power cable, connection cable
Main specifications: rated output 120W+120W (8Ω), 240W+240W (4Ω), 480W (8Ω) input/output unbalanced system in mono, 1 balanced system, 1 large speaker terminal system W440 x H190 x D427 mm 27.5 kg
※Since it is cheap, it will be handed over as is. A portable record player that can be carried around. It also has a built-in speaker, so you can play back just by putting on a record. Recommended for those who want to enjoy records casually. On the exterior, there are scratches and yellowness on the case (Tamura Eiji)
Maintenance information: 2024.12.6 operation confirmed
Accessories: No accessories
Main specifications: Drive system: belt drive 33/45/78 rotation compatible power supply: AC12V 300mA or DC9V (single batteries x 6) External dimensions W370 x D260 x H97 mm 1.8 kg (batteries not included)
Maintained! Vacuum tube preamp. A preamp where you can enjoy the bright sound unique to vacuum tubes. It is an amplifier with a high mid-range texture that reproduces music naturally, with supple sound quality with a nice feel. There are scuffs and bumps on the exterior. (FUJISAWA KOSHI)
Maintenance information: 2024.12.20 Maintained (high right CH microphone noise during phono input → EQ circuit first stage tube replacement. Main volume and rotary switch disassembly cleaning protective agent applied. Vacuum tube pin cleaning. (Each input and output sound was checked.)
Accessories: power cord
Main specifications: 12AX7 x 3 12AU7 x 3 PHONO 3 system, LINE 4 system (PHONO is for MM only) body size W500 x H186 x D326 mm weight 14.6 kg (actual measurement)
The price has been reduced! 2024/12/11 sales price 59,800 yen The changeover switch has been disassembled and polished and maintained! This is a popular Accuphase head amplifier that is rarely in stock. The all-stage push-pull DC configuration is based on the C-220 and C-240 head amplifiers. Since bypass is possible, MM can also be used. There are stains and stains on the exterior. Serial G9Y284 (Yonejima Satoshi)
Maintenance information: 2024.12.11 Maintained (MC changeover switch disassembly contact polishing cleaning, grease application. I/O terminal cleaning)
Accessories: instruction manual, connection cord
Main specifications: MC head amplifier input/output impedance: 100 ohms frequency characteristics 5 Hz to 100 kHz maximum input level 35 mV dimensions W102 x H61 x D350 mm weight 2.5 kg
Maintained by Yukim! It has a slim exterior and plays a smooth, relaxed sound quality. It is soft from high to low frequencies, has a nice texture, and is suitable for female vocals, etc. It makes medium and small speakers play elegantly. As for the exterior, there are fine scratches on the spots and side panels. Serial 002686 (Yonejima Satoshi)
Maintenance information: 2024.12.17 Maintained by the manufacturer (selector/VR cleaning, re-soldering of deteriorated solder parts, main unit cleaning)
Accessories: power cord
Main specifications: MOS FET single push-pull amplifier output 50W+50W (8Ω) W430 × H60 × D310 mm weight 4.9 kg
The price has been reduced! 2024/12/19 sales price 148,000 yen Maintained! The second generation of the famous POA-3000. The thick, solid sound sets it apart from modern tones, and it is a power amplifier with a solid investment in material volume. You can also feel the goodness of things from their solid ability to drive large speakers. The exterior has scratches and dullness appropriate to the model year (Tamai Jun)
Maintenance information: 2024.12.19 maintained (fuse terminal and board cleaning, fuse replacement, bottom cover, electrolytic capacitor capacity check, each board soldering correction, push, SW disassembly cleaning, VOL cleaning, SP relay disassembly contact cleaning, idling adjustment, RCA terminal cleaning, front panel knob cleaning operation test)
Accessories: none
Main specifications: Class A operation real bias circuit 250W+250W/8Ω (300W+300W/6Ω) W488×H199×D480 mm 30kg
The disposal price has been reduced! (Member prices are not applicable) 2024/11/29 sales price 498,000 yen Maintenance has been completed. New Recutural York with HPD385 in the original box. All refreshed after network maintenance, unit overhaul, and enclosure maintenance! The sound of the box is very rich. The piano overtones are pleasant! The golden cheek finish, which is typical of Tannoy's vintage, is reminiscent of an English sound. The balance between the 15-inch unit and enclosure volume is excellent, making for a scaled drawing. The exterior has also been beautifully finished due to maintenance. *There is a description of LSU/HF/15/8 on the serial paper, but it is HPD385. Serial 119664 120023 (Tomonori Asaine)
Maintenance information: 2024.11.29 Maintained (exterior cleaning/repair/wax finish, saran net cleaning/tear repair/repasting, sound-absorbing material removed
Unit maintenance (low frequency side edge exchange/magnetic circuit gap cleaning/center adjustment, high frequency side magnetic circuit gap cleaning/center adjustment network maintenance (frequency characteristic check, ATT cleaning, terminal/contact cleaning) unit assembly)
Accessories: none
Main specifications: used unit HPD385 frequency characteristics 20Hz to 20kHz allowable input 85W 92dB 8Ω W600 x H1075 x D380 mm approx. 42 kg/bottle
The price has been drastically reduced. 2024/12/18 Sales price 158,000 yen Maintenance completed! Comes with a dedicated speaker stand DK-A3 (40,000 yen)! A model commemorating the 50th anniversary of the Diaton Workshop. Unlike conventional diatone tones, which have a glittering image, the soft, and definitely thick English bass is attractive. The treble doesn't stretch so sharply, so it's a very easy speaker to hear. There are undulations on the veneer at the base of the stand (Oikawa Tetsuji)
Maintenance Information: 2024.12.18 Maintained (woofer edge softening treatment)
Accessories: dedicated stand (DK-A3)
Main specifications: 2-way anti-magnetic type, 16cm cone woofer, 4cm cone type tweeter, 6Ω playback frequency band, 35Hz to 40kHz, output sound pressure level, 85dB, crossover frequency, 1.5kHz, maximum input 150W, W266 × H410 × D310 mm 14 kg DK-A3: W285 × H520 × D320 mm 12 kg
Corner bass reflex type enclosure for Tannoy 15 inch. Originally, MONITOR GOLD 15inch was mounted. *Since 8 screws are arranged, units with 4 holes cannot be mounted. The back baffle has also been processed so that the attenuator can be mounted, and it looks like the saran net has also been replaced. Some exterior and back baffle screws are missing, and a feeling of use can be seen, such as dullness, scuffs, scratches, small scratches, peeling veneer, scratches, paint deterioration, etc. (Teramoto Yoshihiko)
Accessories: Unit fixing bolts
Main specifications: plate thickness 22 mm particle board baffle opening diameter 333 mm screw pitch 372 mm W836 x H1160 x D575 mm 45.1 kg (actual measurement)
Output transparent sale Orient core output 50W primary: 3.5 kΩ secondary: 4/8/16 Ω W118 x H104 x D118 mm approx. 4.3 kg/piece (not including protrusions) with original box (there are tears) there are scratches and paint peeling on the whole (Kojima Yosuke)
Accessories: original box
The disposal price has been reduced. Member prices are not applicable. (2021.2.26 sales price 49,800 yen) Unknown 38cm double woofer enclosure. It is a front road horn type that mounts woofers on the top and bottom. There is quite a feeling of use, such as scratches on the entire surface and scattered paint peeling parts. (TAKASAKI Atsushi)
Main specifications: straight opening approx. 355 mm, screw diagonal approx. 420 mm, W760 x H1125 x D670 mm, approx. 88 kg
The disposal price has been reduced. Member prices are not applicable. 2020/6/16 sales price 49,800 yen. Unspecified double woofer enclosure. It is a 3-way specification that can mount JBL 12-inch woofers, JBL 2-inch drivers, and tweeters such as JBL/075 and 2405. The exterior has many scratches and paint peeling, etc., but it is also heavy and very sturdy. (MIZUSHIMA Itsuro)
Accessories: saran net
Main specifications: tweeter hole diameter approx. 80 mm (small hole approx. 65 mm) screw hole diagonal approx. 107 mm driver hole diameter 550 mm screw hole diagonal approx. 100 mm, woofer hole diameter (outer 310 mm/medium 275 mm/inner 223 mm) W640 x H1010 x D700 mm 77 kg/book
The disposal price has been reduced. Member prices are not applicable. 2024/10/5 sales price 59,800 yen. ※It is inexpensive because it has an all-leather finish and modifications such as side handles. JBL original product. A floor-type enclosure that uses a rear-loading horn system. The interior has a folding horn structure with a total length of 2 meters, making it possible to reproduce powerful bass far exceeding its size. The exterior is scattered with chipped corners, scratches, and dullness. Shipping costs will be estimated separately (Yonejima Satoshi)
Accessories: MA15 x 8
Main specifications: hole diameter 365 mm, screw pitch 420 mm backroad horn compatible speakers 2205, 2225, E140 minimum playback frequency 50 Hz main material particle board+Yonematsu laminated plywood (front baffle/road horn) W603 x H12 x D603 mm approx. 55 kg
※The needle cover is missing. Maintained. SPU-GE reprint model. This is a popular oval needle type. It is a cartridge where you can feel the depth of analog. The rich texture and thick outline set it apart from other cartridges (Oikawa Tetsuji)
Maintenance information: 2024.12.18 Maintained (cantilever bending correction, damper adjustment)
Accessories: none
Main specifications: G shell oval needle MC type output 0.2 mV suitable needle pressure 4 g internal impedance 2 ohms dead weight 30 g
The disposal price has been reduced. Member prices are not applicable. 2024/10/28 sales price 25,000 yen*It is cheap because it is not in good condition. It is sold as a set with the EC-11 enclosure that forms a 2 to 4 way system by mounting the 38cm woofer enclosure EC-10, which was jointly developed by Sansui and JBL. The condition is pain such as aging wounds, dullness, and burning. There is only 1 EC-11 back screw. Some dowels are broken (Sasaki Shota)
Accessories: none
Key Specifications: EC-10 Dimensions: W590xH980xD470mm 48kg EC-11 Dimensions: W980xH300xD470mm 20kg
This speaker stand is the perfect match for B&W's 805D3. It achieves a beautiful sound with subtlety and resonance. The exterior is dull (Tamura Eiji)
Accessories: instruction manual, spike, spike holder, fixing screw
Main specifications: Top plate size: W238 x D317 mm Bottom plate size: W258 x D347 mm height 600 mm (including spikes) Weight 22 kg/bottle
The disposal price has been reduced. Member discounts are not applicable. 2024/12/4 sales price 498,000 yen Refresh everything from exterior to unit maintenance! It is an 846B system with the A7 mounted unit in a compact, well-built, self-made enclosure, and you can experience an outstanding extrusion feeling that is relatively small yet makes a lot of noise (Kobayashi Hitoshi)
Maintenance information: 2024.12.3 maintained (exterior repair/polishing/clear finish
Front and rear baffle repair/paint horn paint saran frame newly created/net replacement woofer maintenance: viscoid adjustment, terminal cleaning, driver maintenance: magnetic circuit gap cleaning/center adjustment, terminal cleaning network maintenance: frequency characteristic check, ATT cleaning, terminal cleaning)
Accessories: saran net
Main specifications: 2 way 2 speaker bass reflex type 8 ohm frequency characteristics 40 to 20 kHz sound pressure level 100 dB crossover 800 Hz equipped unit woofer 416-8Z/horn driver 806-8A/network N800-8K W673 x H752 x D485 mm 44.9 kg
The disposal price has been reduced. Member discounts are not applicable. 2024/12/4 sales price 378,000 yen Maintenance completed! A rare 3-way speaker from Wharfedale. A 30cm double woofer configuration that is an Air Deal rectangular type. The balance between the enclosure and unit is exquisite, and the fluffy wharfedale sound seems to take away the tiredness of the day. Exterior, repair marks, dullness, stains, etc. can be seen (Kobayashi Hitoshi)
Maintenance information: 2024.12.4 maintenance completed (4 woofers, edge replacement, magnetic circuit slit cleaning, anti-corrosion measures, 4 tweeters disassembled, VC magnetic circuit slit cleaning, rust prevention, centering adjustment)
Accessories: none
Main specifications: 3 way 6 speakers, 12 inch double woofer/ 5 inch double scoker/ 3 inch double tweeter, 4 inch scoker/tweeter with attenuator volume, W780 x H820 x D360 mm, weight 45 kg
The disposal price has been reduced. Member discounts are not applicable. 2024/12/14 sales price 658,000 yen AccuPhase 40th anniversary SACD/CD transport. In-house one-lens/twin pickup high-speed access mechanism and ultra-heavyweight design chassis structure. It has an even richer sense of scale than the previous 800, and the high sound quality of delicate and precise music is attractive. It allows you to relax and enjoy a variety of sauces. You can see a feeling of use, such as appearance, dullness, scratches, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.12.13 Operation confirmed
Accessories: remote control, power cord, connection cord
Main specifications: twin pickup high speed access mechanism connection terminal HS-LINK coaxial terminal dimensions W477 x H156 x D394 mm weight 30 kg
The disposal price has been reduced! (Not eligible for member discounts) 2024/12/15 sales price 1,780,000 yen The unit has been fully maintained with plenty of time from network maintenance to exterior decoration! This is an AUTOGRAPH with an HPD385 mounted in a genuine TEAC box. I am overwhelmed by the majestic sense of scale and profound and vivid sound image expressed by the low range backroad horn and the mid to low range front short horn, and it also has a good supple and beautiful tone that cannot be obtained with TANNOY in recent years. The exterior has been maintained and finished beautifully (Yonejima Satoshi)
Maintenance information: 2024.12.15 Maintained (exterior repair/polishing/clear finish, front and rear baffle repair/painting
Maintenance: net cleaning/repasting, fraying repair/frame repair. Unit maintenance: low pass side edge exchange, magnetic circuit gap cleaning center adjustment, fastener polishing, high frequency side magnetic circuit gap cleaning center adjustment. Network maintenance: frequency characteristic check, ATT cleaning, faston terminal replacement, 4-pin terminal/terminal cleaning)
Accessories: saran net
Main specifications: 2-way, 1 speaker, all-horn system, corner type usage unit, 15 inch (38 cm), HPD385 impedance 8 ohms, W1070 x H1530 x D660 mm, 78 kg/book