Manufacturer maintained, including CD loader unit replacement! SA8004's successor model SACD player. It is also equipped with a USB-DAC compatible with DSD5.6MHz, so I recommend this one for those interested in high-resolution sound sources. It has excellent resolution and clear sound, just because it was born so majestically in the high-resolution era. Scratches and dullness are scattered on the front panel and top plate. Serial 15001610002186 (Murakoshi Yoichi)
Maintenance information: 2024.3.17 sound output confirmed 2024.1.19 manufacturer maintained (CD loader unit replacement, optical lens cleaning, other inspections)
Accessories: remote control, instruction manual, power cable
Main specifications: SACD/CD/USB-DAC player USB-DAC compatible sampling frequency PCM44.1 to 192 kHz, DSD 2.8 to 5.6 MHz compatible digital input/pin jack, angular optical connector W440 x H106 x D341 mm 8.0 kg
※ There are crack repair marks and chips on the remote control. Maintained! An improved model of the CDP-X555ES. Equipped with a pulse DAC developed in-house, it is the core model of the ES series and uses a sapphire bearing motor and a copper-plated FB chassis. The sound quality is soft and smooth even though it has a core in the mid to high frequencies. You can enjoy not only vocal sound sources, but also rich classical music and jazz. In addition to the exterior, as described above, a feeling of use can be seen, such as dullness, small scratches, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.3.19 Maintained (partial pickup dismantling, mechanical system and optical system adjustments on cleaning and polishing. Mechanism drive belt replacement. After disassembling the SPDL motor, wipe off the cured grease and reapply. Level volume wash)
Accessories: remote control, instruction manual, original box
Main specifications: PICKUP/KSS-272A D/A converter/CXD2562 digital filter/CXD2560 digital output: optical frequency characteristics 2Hz to 20kHz W470 x H125 x D375 mm 13 kg
Lots of accessories! Pioneer's popular ribbon tweeter. Using lightweight and highly rigid beryllium diaphragms and Alnico magnets, the delicate, high-quality high range is still an attractive gem. Good product with little feeling of use (Murakoshi Yoichi)
Maintenance information: 2024.3.29 sound output confirmed
Accessories: instruction manual, pedestal, original box, protective cover
Main specifications: ribbon tweeter with fuse protection circuit, playback frequency 5,000 Hz to 120,000 Hz, 8 ohms, sound pressure 97.5 dB, maximum input 100 W, rated input 50 W (both 5 kHz, -12 dB/when using an OCT network) W134 x H89 x D179 mm 2.6 kg
The price has been drastically reduced. 2024/2/17 sales price 79,800 yen 607 S2 anniversary edition with power and a sense of scale. A decoupling double dome tweeter with a proven track record is used to achieve 38 kHz high frequency limit characteristics. You can enjoy the accurate and clear sound typical of the company. The degree is generally good (Murakoshi Yoichi)
Maintenance information: 2024.2.16 sound output confirmed
Accessories: instruction manual, saran net, original box
Main specifications: 2 way 8Ω 84dB W165 × H300 × D207 mm 4.7 kg
Equipped with a titanium-coated 7th generation Uni Q driver. Atmospheric sound quality with a wide range. It comfortably plays vocals, chamber music in small groups, etc. There is a feeling of use in appearance, dullness, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.3.15 Operation confirmed
Accessories: spikes, saran net
Main specifications: 3-way 3-speaker frequency characteristics 40Hz to 40kHz W220 x H865 x D372 mm 14.5 kg
A heavyweight stand perfect for JBL mid-size speakers. The 3 struts and steel plates are resistant to vibration systems and support clear playback sound. It's the best match for the 4429/4319/4312 series, etc. Good appearance, dullness, and minor scratches (Kobayashi Hitoshi)
Accessories: spike, spike holder, instruction manual, original box
Main specifications: steel bottom plate dimensions W440 x H400 x D370 mm (excluding spikes), top plate dimensions W360 x D293 mm, weight 26 kg/book
The price has been drastically reduced. 2024/2/15 sales price 59,800 yen ※The exterior is in poor condition, so it's cheap. Equipped with a unit that uses wood fiber cone paper. The polished front baffle and rounded edges not only look great, but also reduce distortion during playback. The tone is detailed and transparent like DALI, and you can feel the expanse of space, and it goes particularly well with classical music. You can see the exterior, leg oxidation, rust, scratches on the top plate, torn corners on the saran net, etc. (Takasaki Atsushi)
Maintenance information: 2024.2.11 Operation confirmed
Accessories: saran net
Main specifications: Unit configuration/mid and low range 180 mm cones x 2, treble range 25 mm soft dome frequency characteristics 40 Hz to 26.5 kHz crossover 2.4 kHz 90 dB 6 Ω recommended amplifier output 40 to 150 W W257 x H994 x D320 mm (including base) 14.9 kg/book
Maintained! A pre-main amplifier that inherits the sound of the D series and has achieved even lower distortion. A model where you can feel the uniqueness of Sansui at the time in the extrusion of low frequencies and sound creation. It's energetic, playable, and goes great with jazz and rock, and is compatible not only with MMs but also with MC, making it great for analog fans. There is a feeling of use such as dullness, abrasions, corrosion, dirt, etc. (Kobayashi Hitoshi)
Maintenance information: 2023.11.21 Maintained (balance, main volume, output relay, power supply floating resistor, Mylar capacitor, equalizer section op amp replaced. Input selector and other rec outs, tone, subsonic, and muting switches are disassembled and polished grease is applied. (Each volume, switch cleaning, solder repair, interior and exterior inspection and cleaning, adjustment inspection.)
Accessories: copy of the instruction manual
Main specifications: 75W+75W (8Ω) PHONO (MM/MC) W445 x H163 x D403 mm 12.4 kg
There is a lot of dirt on the exterior, and the sponge inside is gone, so it's cheap. SRM-T1 and SR-LM signature set It is a model that excellently mixes the softness of a vacuum tube with the wide range characteristics of a transistor. You can enjoy the perfect balance between the clear sound that you won't get tired of listening to and the taste of a vacuum tube (Murakoshi Yoichi)
Maintenance information: 2024.3.29 sound output confirmed
Accessories: power cable
Main specifications: [SRM-T1] 3 output systems (provider x 2, normal bias x 1) vacuum tube 6FQ7 x 2 W195W x H103H x D375 mm 3.9 kg
Comes with original box! MC cartridge using a solid boron cantilever and a special line contact needle. It is a cartridge with high resolution and a transparent tone, and you can feel the high level of power. The cantilever turns slightly to the left (Hiura Katsuji)
Maintenance information: 2024.3.24 sound output confirmed
Accessories: instruction manual, original box, needle cover
Main specifications: MC type playback frequency band 15 to 50000 Hz output voltage 0.4 mV channel separation 30 dB output balance 0.5 dB needle pressure 1.8 to 2.2 g (2.0 g standard) coil impedance 12 Ω DC resistance 12 Ω load resistance 100 Ω or more (when connected to a head amplifier) line contact needle 8 g
First model of the Fostex bookshelf speaker “GR Series”. Although it is a bookshelf type, it is a model that achieves high quality and sufficient amount of bass reproduction, so feel free to enjoy the bass you feel on your body. There are no noticeable scratches on the exterior. Serial 1000080, 1000240 (Murakoshi Yoichi)
Maintenance information: 2024.3.28 sound output confirmed
Accessories: saran net
Main specifications: 2-way bass reflex cross 2.0kHz output sound pressure level 85dB playback frequency band 50Hz to 35kHz impedance 8Ω maximum allowable input 100W W228 x H390 x D273 mm approx. 8.6 kg/book
The price has been drastically reduced. 2024/2/6 sales price 59,800 yen ※1 shelf board is missing and has 3 tiers, and is cheap because there are many scratches. A popular large rack. It is a model with adjustable storage capacity and height. It also has high performance as an audio rack, and is made of full-bodied natural wood with a sturdy structure and interior design. You can see a feeling of use, such as appearance, dullness, small scratches, abrasions, etc. (Kobayashi Hitoshi)
Accessories: none
Main specifications: W1230 x H703 x D563 mm Weight approx. 52 kg
Disposal prices have been reduced. Member discounts will not be applied. 2022/12/18 sales price 79,800 yen Columbia's desktop gramophone Viva-Tonal Grafonola. The volume can be adjusted with the front fins. The sound box is equipped with No. 9. The exterior is in good condition considering the age, although there are some scratches and stains due to aging (Kanai Hidetsugu)
Maintenance information: 2022.12.11 sound confirmed
Accessories: none
Main specifications: dimensions W490 (including handle) x H320 x D483 mm, weight 14 kg
Maintained in 2023/8. The first model in the α607 series. It is characterized by clear, clear mid-high tones and powerful bass. It excels at sharpness and balance, and you can listen to jazz and rock in particular comfortably. This is one car that shines with its high cost performance. There is a feeling of use on the exterior, small scratches, rust, SP terminal discoloration, etc. (Kobayashi Hitoshi)
Maintenance information: 2023.8.1 maintained (May amp circuit transistor replacement, master volume replacement, output relay replacement, solder repair, MM/MC switch disassembly, polishing grease application, cleaning of each volume switch, internal inspection and cleaning, adjustment inspection, operation confirmation)
Accessories: copy of instruction manual
Main specifications: 105W+105W (6Ω) 90W+90W (8Ω) W448 × H160 × D441 mm 15.7 kg