It is the SPU “number one” newly created with the goal of reproducing the thickness and thickness of the sound of old SPUs of yesteryear. Among them, the #1S is a cartridge that uses a round needle, and a wide range is also added. Serial 312009 (Kanai Hidetsugu)
Maintenance information: 2024.4.23 sound output confirmed
Accessories: original box, instruction manual, needle cover
Main specifications: round needle output voltage 0.18 mV internal impedance 2 ohms needle pressure range 3.0 to 5.0 g dead weight 30 g
It is the SPU “number one” newly created with the goal of reproducing the thickness and thickness of the sound of old SPUs of yesteryear. Among them, the #1S is a cartridge that uses a round needle, and a wide range is also added. Serial 242699 (Kanai Hidetsugu)
Maintenance information: 2024.4.23 sound output confirmed
Accessories: original box, instruction manual, needle cover
Main specifications: round needle output voltage 0.18 mV internal impedance 2 ohms needle pressure range 3.0 to 5.0 g dead weight 30 g
This is an MC-type cartridge from Entre. The sound is slightly stiff and sharp, and the sound quality is sharp. The outline and texture of the low frequencies are also firm. There are no particular bends. Serial 39354 (Tamura Eiji)
Maintenance information: 2024.4.17 operation confirmed
Accessories: none
Main specifications: MC type output 0.5 mV needle pressure 1.7 g to 2.3 g (appropriate 2.0 g) impedance 6.3 ohms dead weight 5.9 g
Comes with original box! An A-shell oval needle characterized by the SPU's original direct sound. The sharp, firm, and powerful mid-low range and detailed expressiveness are attractive. There are fewer incidental sounds than the G-shell elliptical type, so you can enjoy an even more direct tone. Serial 924201 (Fujisawa Yukishi)
Maintenance information: 2024.4.6 operation confirmed
Accessories: original box, needle cover
Main specifications: MC type 0.2 mV 3 to 4.5 g internal impedance 2 ohms load resistance 47 kΩ oval needle dead weight 23.6 g (mounter and screws included)
A mid-size Shure model equipped with a solid diamond needle. The resolution is high, and the cuts and crisp sound with a sense of energy in the high frequencies are attractive. The exterior has a feeling of use such as dullness (Hiroki Aso)
Maintenance information: 2024.4.23 sound output checked
Accessories: none
Main specifications: mm cartridge output 4.0 mV needle pressure 0.75 to 1.5 g frequency characteristics 20 to 20,000 Hz dead weight approx. 6.5 g
MC cartridge using LC-OFC (linear crystal/oxygen-free copper) wire based on DL-103. Familiar sound with a wide range. The supple sound makes it comfortable to listen to. The exterior has a feeling of use, such as dullness on the body. Serial 4126 (Hiroki Aso)
Maintenance information: 2024.4.21 sound output confirmed
Accessories: none
Main specifications: MC type output 0.25 mV, proper needle pressure 2.2 to 2.8 g, internal impedance 13 ohms, own weight 8.5 g
The sound of the shell, which determines the rich sound of the SPU called the “core of the MC cartridge,” is enhanced by blending wood powder and resin. It is a modern SPU that combines the softness and intensity of the classic series sound. It's very slightly leaning to the left. Serial 730862 (Takasaki Atsushi)
Maintenance information: 2024.4.20 sound output confirmed
Accessories: original box, needle cover
Main specifications: MC type output voltage 0.2 mV impedance 2 ohms frequency characteristics 20 to 25,000 Hz internal resistance 6 ohms diamond needle nude elliptical (elliptical needle) suitable needle pressure 4 g dead weight 32 g
SPU-GE reprint model. This is a popular oval needle type. It is a cartridge where you can feel the depth of analog. The rich texture and thick outline set it apart from other cartridges. It's very slightly to the right. Serial 718026 (Takasaki Atsushi)
Maintenance information: 2024.4.20 sound output confirmed
Accessories: original box, needle cover
Main specifications: G shell oval needle MC type output 0.2 mV suitable needle pressure 4 g internal impedance 2 ohms dead weight 30 g
Black, the highest peak in the 2M series, is now in stock. The stylus tip is equipped with the same high-grade solid diamond shibata needle as the famous MC Jubilee. Pure silver-plated high-purity copper wire is used for the power generation coil. The amount of information on 2M's highest peak is truly one word (Hiura Katsuji)
Maintenance information: 2024.4.18 sound output confirmed
Accessories: original instruction manual box
Main specifications: output voltage 5 mV frequency characteristics 20 to 31,000 Hz internal resistance 47 ohms suitable needle pressure 1.5 g dead weight 7.2 g
The MM cartridge that comes with the YP-D3 is dual magnetic. The sound quality is flat balanced, but the sound is very energetic, so I recommend it. The exterior is dull and has a feeling of use (Hiura Katsuji)
Maintenance information: 2024.4.19 sound output confirmed
Accessories: none
Main specifications: mm type output voltage 2.2 mV needle pressure 2.0 g dead weight 6 g
*The headshell is an SPU-G (M) one, but the body is inexpensive because it is GE. Needle cover missing. G-shell oval needle model. The glossy, rich, and heavy sound is attractive without fading. It is an eternal staple cartridge that fully conveys the original appeal of analog. The exterior has rust on the metal parts, and dullness and dirt throughout the body. The needle tip is in good condition (Murakoshi Yoichi)
Maintenance information: 2024.4.17 sound output confirmed
Accessories: none
Main specifications: G shell oval needle MC type output 0.2 mV needle pressure 3 to 4.5 g internal impedance 2 ohms dead weight 31 g
※It is cheap because it is in poor condition. Speaking of Grace, the F-8 is famous, and this was developed as a higher-level model. You can enjoy a powerful yet delicate sound. The condition is that there is a feeling of use such as dullness over time. The exterior has a feeling of use such as dullness, etc., and the needle tip is bent to the left (Asaine Tomoho)
Maintenance information: 2024.4.16 sound output confirmed
Main specifications: frequency range 10 to 40,000 Hz, output voltage approx. 5.5 mV, standard needle pressure 1.2 g, dead weight approx. 6 g
Unspecified mmType cartridge. It's very similar to the cartridge that comes with the DENON DP-500M. The exterior has a feeling of use such as dullness (Tomoho Asaine)
Maintenance information: 2024.4.19 sound output confirmed
Accessories: none
*Needle cover missing. G-shell elliptical needle model. The glossy, rich, and heavy sound is attractive without fading. It is an eternal cartridge that fully conveys the appeal of analog. There are slight corrosion irregularities on the shell (Murakoshi Yoichi)
Maintenance information: 2024.4.17 sound output confirmed
Accessories: none
Main specifications: G shell oval needle MC type output 0.2 mV needle pressure 3 to 4.5 g internal impedance 2 ohms dead weight 31 g