The disposal price has been reduced. Member discounts are not applicable. 2024/4/9 sales price 138,000 yen ※It is cheap because the condition is not good. Next-generation model of the L-550, a famous pure Class A amplifier that has been maintained by the manufacturer (*PHONO1 cannot be used due to a broken equalizer board). The very smooth, deafening warm color sound perfectly matches the delicate sound quality of pure A grade. It also has a reputation for analog sound, and thick sound quality can be obtained with both MM/MC. There is a feeling of use due to appearance, dullness, abrasions, scratches, paint deterioration, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.4.9 manufacturer maintenance completed (equalizer selector switch disassembly cleaning, correction due to broken equalizer board, other contact cleaning, general adjustment*PHONO1 cannot be used due to broken equalizer board)
Accessories: copy of instruction manual
Main specifications: pure A grade 50W+50W (8Ω) PHONO (MM/MC) PHONO/CD straight circuit system W453 x H174 x D470 mm weight 20 kg
The disposal price has been reduced. Member discounts are not applicable. 2023/4/2 sales price 250,000 yen ※We have newly created head amplifier modules ✕ 2, Phono equalizer modules x 2, and flat modules x 2. Maintained! This is a control amplifier from Sony's high-end brand, the Esprit series. Straight Sony sound with a sense of speed similar to the TA-E900. I want to use the look and sound in combination with the company's Power TA-N902. The exterior has small scratches and is dull. Serial 200499 (Takasaki Atsushi)
Maintenance information: 2023.4.2 Maintained (2 flat modules replaced. Check the input/output waveform, check the left and right balance, and connect a power amplifier to perform a comprehensive operation test.)
2023.1.5 Maintained (Phono equalizer module x 2 replaced. Check the input/output waveform, check the left and right balance, and connect a power amplifier to perform a comprehensive operation test.)
2022.8.31 Maintained (head amplifier module ✕ 2, capacitor, semi-fixed resistor, relay, LED, lamp, Capcom, power cord replacement. All SW, VR disassembly and cleaning. Re-solder the deteriorated part of the solder surface of the board. Check the input/output waveform, check the left and right balance, and perform a comprehensive operation test by connecting a power amplifier.)
Accessories: copy of instruction manual
Main specifications: 2 phono inputs, 5 line inputs, 2 pre-out systems, W480 x H105 x D465 mm, 12.5 kg
The price has been drastically reduced. 2023/12/29 sales price 99,800 yen Maintenance completed! The design full of oldies is attractive, and Newcam's mono mixer premain for PA. 6L6 is used as the output tube. Channel 1 is compatible with LINE, PHONO, and MIC, and channels 2 to 4 are compatible with microphones. The volume for each channel is around 12 o'clock, and MASTER is used for volume adjustment. There is a feeling of use such as small scratches and paint deterioration appropriate to the exterior model year (Kobayashi Hitoshi)
Maintenance information: 2023.12.12 maintenance (master volume disassembly, cleaning repair, MIC input transformer, etc. contact repair, left side front lamp off, 12AX7, 150 μF electrolytic capacitor replacement. Vacuum tube socket and RCA jack caulk repair. Operation checked (measured at 41 to 61 W SP: 8 Ω with rated output AC 100 to 117 V).
Accessories: none
Main specifications: 6L6 push-pull 60W mono LINE, 1 PHONO system each, MIC4 system W440 x H190 x D350 mm 16.5 kg
The disposal price has been reduced! (Member discounts are not applicable) 2023/12/15 sales price 79,800 yen Maintained! JBL professional 2 inch screwdriver It is an item that continues to be used today in large horn systems, etc. The quality unique to titanium diaphragms makes the vocal breathing, drum hi-hat, and outstanding realism no matter which one you take. The exterior has dullness, scratches, rust, etc. due to use over time. Serial 53400 63923 (Tomonori Asaine)
Maintenance information: 2023.12.15 Maintained (diaphragm installation adjustment throat cleaning DCR 63923/8,3 ohm, no vibration damage
(DCR 53400/7.8Ω vibration has scratches and small dents)
Main specifications: throat diameter 5 cm; allowable input: 100 W; sound pressure level: 111 dB/w/m; frequency characteristics: 500 Hz to 20 kHz; crossover frequency: 500 Hz or more; 16 ohms; diameter: 235 x depth: 132 mm; 13.6 kg/1
The disposal price has been reduced! (Member discounts are not applicable) 2023/5/13 sales price 69,800 yen ※This is not a DC amplifier, so please connect the speaker cable before turning on the power when making sound. Maintained! 120V specification Dinaco's transistor stereo power amplifier was developed by utilizing technology obtained with tubular amplifiers in semiconductor circuits. You can enjoy intense, dynamic expression without requiring precise sound expression. You can see the exterior, dullness, corrosion, etc. depending on the age (Kobayashi Hitoshi)
Maintenance information: 2023.5.13 Maintained (power SW dismantling contact cleaning) 2022.8.26 Maintained (bypass C replaced. Replace the power stage with a Tr pair. Internal cleaning, operation check. Waveform clip at AC100V. (120V → OK)
Accessories: none
Accessories: none
Main specifications: 60W+60W W330 x H104 x D260 mm 8 kg
The disposal price has been reduced! (Member discounts are not applicable) 2024/1/18 sales price 49,800 yen Maintained! An American-made amplifier from the 1970s that can hardly be seen today. Circuits for self-preservation, such as security, correction, and protection, have been cut off, and I think that handsome atmosphere is well reflected in the sound. It has the same feeling of use as the model year (Daiki Goto)
Maintenance information: 2024.1.18 Maintained (LED installation (original not available) poor power stage transistor deterioration, defective transistor in the board → replacement. Bias adjustment, operation check.)
Accessories: none
Main specifications: size (actual measurement) W406 x H155 x D327 mm weight (actual measurement) 12.2 kg
This is a woofer mount adapter that is thought to be used to convert a 38cm unit hole to a 30cm unit. The previous owner attached it to the JBL C38 BARON. The exterior and bolt mounting part of the individual on one side are damaged, and there is a feeling of use due to dullness, abrasions, etc. (Kobayashi Hitoshi)
Accessories: none
Main specifications: mounting screw pitch: outer circumference: 370 mm, inner circumference: 293 mm; caliber: 270 mm; external dimensions: W356 x H365 x D10 mm; approx. 0.4 kg
Maintained by the manufacturer! This model was the first to use an ALPHA processor in the best-selling 1650 series. The mid and low frequencies are quite stable, and the balance depicts rich, rich music regardless of genre. There are dents on the front panel and footprints on the top plate (Oikawa Tetsuji)
Maintenance information: 2024.4.17 manufacturer maintained (inside the CD mechanism, loading belt, tray opening/closing SW replacement. The HF level for laser pickups is within the regulations and is fine now. Sound output test)
Accessories: remote control, instruction manual
Main specifications: Real 20-bit 4DAC/Lambda Super Linear Converter with 20-bit 8x oversampling digital filter+GIC 3rd order analog filter frequency characteristics 2Hz to 20kHz W434 x H120 x D340 mm 10.2 kg
Maintained by the manufacturer! This model was the first to use an ALPHA processor in the best-selling 1650 series. The mid and low frequencies are quite stable, and the balance depicts rich, rich music regardless of genre. The exterior has dents on the front panel corner, and there are line scratches, small scratches, dullness, etc. ※The remote control is out of stock (Oikawa Tetsuji)
Maintenance information: 2024.4.17 manufacturer maintained (inside the CD mechanism, loading belt, tray opening/closing SW replacement. VR has been reworked. The HF waveform of the laser pickup is within the regulations and is currently fine. Sound output test)
Accessories: copy of instruction manual ※ remote control missing
Main specifications: Real 20-bit 4DAC/Lambda Super Linear Converter with 20-bit 8x oversampling digital filter+GIC 3rd order analog filter frequency characteristics 2Hz to 20kHz W434 x H120 x D340 mm 10.2 kg
*Inexpensive because there are multiple scratches on the front panel. This model uses a non-feedback amplifier circuit with discrete components at all stages. High quality parts such as metal film resistors and high quality film capacitors are used in the RIAA circuit. The smooth, high-SN, and delicate expressive power typical of recent models is attractive (Oikawa Tetsuji)
Maintenance information: 2024.4.17 operation confirmed
Accessories: power cable
Main specifications: mm/MC compatible non-feedback equalizer amplifier input sensitivity mm2.5mV/47kΩ or less, MC0.12mV/470Ω W220 x H57 x D228 mm 2.6 kg
*Currently sold because it is cheap. We have a full range of accessories such as the original box. The subwoofer is a slim, compact, and high-resolution sound bar that can be placed under a sofa, and has enhanced installability. Bluetooth compatible and easy to enjoy (Oikawa Tetsuji)
Maintenance information: 2024.4.17 operation confirmed
Accessories: original box, remote control, power cable, connection cable
Main specifications: bar speaker 30W+30W W497 x H64 x D104 mm 2.0 kg subwoofer W383 x H95 x D380 mm 6.6 kg
Maintained! A network with a crossover frequency of 7 kHz. It is ideal for MID/HIGH for 3-way systems using 2440. There is a small wound (Oikawa Tetsuji)
Maintenance information: 2024.4.17 Maintained (2 VR attenuators, 12 screws, 24 insulating washers replaced)
Accessories: none
Main specifications: crossover frequency 7 kHz, allowable input (continuous program), 50 W impedance, bass range: 12 to 16 ohms, treble range: 12 to 16 ohms, treble attenuation/variable volume, mounting hole W140 x 108 mm 0.7 kg
Maintained! A 1500 Hz crossover network perfect for combining the LE14A with the 175DLH and LE175. The exterior is dull and has small scratches (Oikawa Tetsuji)
Maintenance information: 2024.4.17 Maintained (2 VR attenuators, 12 screws, 24 insulating washers replaced)
Accessories: none
Maintained! Genuine Electri A stainless steel chassis version of the 2nd generation reprinted model. It is a model that stands out for its good SNR feel and improved fine particle feel, etc., and its depth of pocket that is compatible with the latest sources is attractive. The heavy, vintage look is also wonderful. There are small transformer scratches on the exterior and many disappearing characters on the back. Serial JE10260 (Yonejima Satoshi)
Maintenance information: 2024.4.17 Maintained (The remodeled part has been restored to a state close to its original state. Since the electrolytic condenser liquid leak replacement shield case is out of stock, the additional guide pin was damaged, so create and paste a sticker with the missing letter in the hakama replacement character. Output audio check)
Accessories: No accessories
Main specifications: 6550 push-pull input 2 systems (XLR/RCA) rated output 75W+75W (4/8/16Ω) mono 150W (2/4/8Ω) W406 x H190 x D305 mm 30.5 kg
※It has a cigarette smell, so it's cheap. Class D power amplifier compatible with DSD 11.2 MHz and PCM384 kHz/32 bit inputs. When reproducing a digital source, all processing from input to output can be performed in the digital domain. It is also equipped with a USB-DAC function and Bluetooth function, so you can enjoy music with high sound quality from a PC to a smartphone. As for the exterior, there are some square brackets. Serial AXD36190304432 (Tamura Eiji)
Maintenance information: 2024.4.17 operation confirmed
Accessories: remote control, power cable
Main specifications: rated output 20W+20W (8Ω) 40W+40W (4Ω) speaker load 4-16Ω analog audio input terminal/unbalanced input × 1 digital audio input terminal/USB-B input × 1 coaxial digital input × 1 optical digital input × 2 W200 × H86 × D258 mm 2.7 kg