Maintained by Electri, including replacing the windshield panel with a new one! A pre-main amplifier with a built-in McIntosh traditional output transformer. You can enjoy the rich and rich sound world typical of Macintosh. This is one that combines the sound appeal of modern and old McKinn. The sense of power that makes you feel the strength is similar to that of a separate amplifier. The exterior is dull. Serial JLF1440 (Fujisawa Yukishi)
Maintenance information: 2024.3.28 manufacturer maintained (windshield panel replacement. Replace the Oring to fix the switch bezel. Due to a problem with the operational amplifier, characteristics were poor, and the voltage was unstable, so a lot of pop noise was generated when the front volume display was off. IC exchange. Capacitors were replaced at various other locations. Replaced due to filter capacitor deterioration. Other relays, transistors, etc. have been replaced just in case, but please be aware that the pop noise of this unit is difficult to completely remove due to product specifications, so it can be heard slightly depending on when the power is turned on. Replace all front lamps. Lamp fixing grommet replacement. There is a difference in meter runout when the volume is low, but when the output is raised about 3/4, the difference is not very noticeable. Due to specifications due to individual differences in parts, improvements are difficult, so adjustments have been made so that they fit at a position of approximately half a meter. Same confirmation and other inspections.)
Accessories: remote control, instruction manual
Main specifications: 150W+150W (8/4/2Ω) phono input MM dimensions W445 x H179 x D508 mm weight 30 kg
Special stand for Sonas Fabers. Italian walnut wood is assembled, and marble, a specialty of the Tuscan region, is used as a base, and you can feel the beauty of handicraft as well as a sense of stability (Daiki Goto)
Accessories: none
Main specifications: Height 600 mm Top plate: W170 x D200 mm Bottom plate: W320 x D320 mm 15 kg/bottle
※The remote control is being ordered. It is a CD player with a nostalgic design typical of Yamaha of yesteryear. The sound is clear and delicate, and the sound field feeling in SACD playback is worth listening to. There is a sense of transparency, and you can enjoy sound with a wide range (Daiki Goto)
Maintenance information: 2024.3.27 Operation confirmed
Accessories: remote control, instruction manual, power cable
Main specifications: Playback media SACD/CD/CD/RW (MP3/WMA playable) output terminal [analog] RCA/XLR [digital] optical/coaxial W435 x H137 x D440 mm 15 kg
Fostex premium woofer unit. This is a laboratory series 40cm cone woofer L475 used in FOSTEX2. There is dullness, small scratches, and peeling of the gasket (Daiki Goto)
Accessories: none
Main specifications: 40cm cone woofer output 150W impedance 8Ω (measured DC value 7.4Ω/7.5Ω)
A rare item! Audiocraft bi-amp adapter. It distributes 1 input system to 3 systems. Recommended for multi-faceted people. It is also equipped with a phase selector (Oikawa Tetsuji)
Accessories: none
Main specifications: W312 x H80 x D120 mm (actual measurement)
Technica headphone stand Hard and sturdy beech wood is used for the top wood and base wood. This headphone stand pursues interior design and ease of use. There is a small wound (Oikawa Tetsuji)
J1 project isolation board (small size). pair. This board is perfect for standing tall boy speakers on the floor, between small bookshelf speaker stands and speakers, and underneath small components. There are a lot of line wounds (Oikawa Tetsuji)
Main specifications: 250 x 300 x 20 mm
Set of 4 Supra banana plugs Since it can also be connected, it can be used for various purposes, such as installing a super tweeter. 24K plating Overall there is dullness (Oikawa Tetsuji)
Accessories: none
Genuine Time Road Master clock generator. A rare clock with natural orientation, excellent sound image localization, and excellent reverberation expression. It is a model that specializes in expressiveness rather than performance. There is a line wound on the top plate (Oikawa Tetsuji)
Maintenance information: 2024.3.28 power check (operation has not been checked because there is no clock equipment)
Accessories: power cable, instruction manual
Main specifications: clock frequency 32/44.1/48/88.2/96kHz, 6 clock out systems, high-precision crystal oscillator, shipment accuracy 0.1 ppm, W430 × H52 × D390 mm, 6.8 kg
※One felt foot is missing, so one side is tilted. There are a lot of scratches. When connected to a speaker, it reduces speaker impedance fluctuations in the mid to high range. More faithful speaker driving is possible, speaker resolution and stand-up are improved, and natural afterglow is also reproduced (Oikawa Tetsuji)
Accessories: none
Main specifications: W100 x H47 x D117 mm approx. 190 g/piece
Maintained! A control amplifier with a thorough review of the equalizer amplifier, which is important for record playback. It's perfect for those who want to make analog sounds moist. The retro look is also GOOD. The exterior has a feeling of use such as dullness and small scratches. Serial 111076 (Fujisawa Yukishi)
Maintenance information: 2024.3.7 maintained (rec function, tape monitor, gain, tape monitor, LOW HIGH filter, mode switch disassembly, polishing grease application, other volumes, switch cleaning, solder repair, power cord replacement, capacitor replacement, pin jack cleaning, operation check. (*The front pin jack input is fixed with rivets, so there is a lag ※When switching the impedance of the phono, the resistance value changes and the operation is normal, but there is not much change)
Accessories: none
Main specifications: phono circuit: MM2 system Phono 1:2.5 mV/50 kΩ Phono 2:2.5 mV/30 kΩ, 50 kΩ, 100 kΩ W410 × H170 × D270 mm 7 kg
*The lower front panel has been changed to a PRA-1003 panel. Maintained! A stereo power amplifier using a DC amplifier system. The power supply unit is equipped with 2 independent power transformers on the left and right sides. The powerful and clear sound emanating from the sturdy body is impressive! The well-designed analog meters are beautiful. You can enjoy all genres with very good extrusion and a sound that is not addictive. There are stains and small scratches throughout the exterior. Serial 110456 (Fujisawa Yukishi)
Maintenance information: 2024.3.7 Maintained (LR output meter relay replacement, LR power amplifier solder repair, differential circuit part FET, transistor replacement, pin jack replacement, interior and exterior inspection cleaning*Since the ceiling panel cannot be obtained from this unit, it remains the same)
Accessories: none
Main specifications: rated output 100W+100W (4Ω) 85W+85W (8Ω) transmission frequency characteristics DC to 100kHz W410 × H200 × D285 mm 17 kg
A passive controller with minimal functionality packed tightly and compactly. You can level, mute, and monossum stereo sources. Serial S211100256C9RGU (Fujisawa Yukishi)
Maintenance information: 2024.3.28 Operation confirmed
Accessories: instruction manual, original box
Main specifications: input XLR/standard phone jack complex 1 system, mini phone jack 1 system output XLR/standard phone jack complex 1 system, 1 mini phone jack system W145 x H69 x D85 mm 0.4 kg
※Since it is for business use, it will be handed over as is. This unit has 4 built-in circuits for converting unbalanced output to balanced output, and 4 circuits for converting balanced input to unbalanced input. In addition, it also functions as an audio distributor that can separate one unbalanced input into multiple balanced outputs using an INPUT LINK switch equipped between each channel. Serial 790070 (Fujisawa Yukishi)
Maintenance information: 2024.3.28 Operation confirmed
Accessories: No accessories
Main specifications: UNBALANCED TO BALANCED input RCA pin jack ✕ 4 output XLR type connector ✕ 4 BALANCED TO UNBALANCED input XLR type connector ✕ 4 output RCA pin jack ✕ 4 size W482 ✕ H48 ✕ D196mm weight 2.8 kg