Made from Hokkaido Asada cherry wood and African ebony. It doesn't tighten too much as a metal insulator, and it makes the most of the sound of the music. There is dullness etc. throughout the exterior (Hiroki Aso)
Accessories: none
Main specifications: W70×D70×H35mm
The exterior of the woofer mounting clamp, which seems to be a self-made set of 5, has variations in the cutting part, there are corrosion and mounting marks all over, and there is a feeling of use such as dullness, abrasions, etc. (Kobayashi Hitoshi)
Accessories: none
Main specifications: Mounting part, claw depth approx. 12 mm, 27 x 24 x 18 mm
※Only 1 speaker cable, 0.9 m, has an orthodox cab tire structure, and reproduces sound quality that is thicker than the price. There is a feeling of use (Kobayashi Hitoshi)
Maintenance information: 2023.5.22 continuity confirmed
Accessories: none
※Only 1 interconnect cable is a 0.4 m three-core line cable with no terminals. There are exterior, feeling of use, small scratches, scuffs on the sheath, etc. (Murakoshi Yoichi)
Maintenance information: 2023.12.9 continuity confirmed
Accessories: none
The disposal price has been reduced. Member discounts are not applicable. 2022/5/23 sales price 300 yen. *Only one speaker cable uses oxygen-free copper (OFC) as the untreated conductor at the 0.5m end. The sound quality has a relatively flat impression, so you can easily feel the sound quality a notch higher (Kanai Hidetsugu)
Maintenance information: 2022.5.22 continuity confirmed
Accessories: none
Speaker cable A standard cable that has become synonymous with 1.0 m pair of unprocessed speaker cables. It features a stranded wire structure that enables reliable transmission with low noise even in harsh environments such as studios. Monitor-like sound quality with little coloring (Kanai Hidetsugu)
Maintenance information: 2024.3.30 continuity confirmed
Accessories: none
Speaker cable 2.0m pair A standard BELDEN speaker cable nicknamed “sea snake” with untreated terminals. The cable braided in orange and black is impressive, and it features a tight sound. There is an appearance, dullness, and a feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.4.13 continuity confirmed
Accessories: none
IEEE1394A cable 4 pin/6 pin terminal 1.0m audio-technica GATE LINK series iLINK cable Uses PCOCC+OFC hybrid conductors that the company is proud of (Murakoshi Yoichi)
Maintenance information: unconfirmed
Accessories: none
Speaker cable with soldered 0.9 m pair ends It is a solid sound that clearly shows the backbone of an LC-OFC conductor sound. The exterior has a feeling of use such as rubbing and dirt on the sheath (Murakoshi Yoichi)
Maintenance information: 2024.4.11 continuity confirmed
Accessories: none
※The sound output has been confirmed, but since it is not compatible with the manufacturer, it will be handed over as is. It is a cost-effective USB DAC with a built-in headphone amplifier. The DAC is equipped with 2 8-channel DACs “ES9016” made by ESS. The headphone amplifier is also compatible with 4-pin and 3-pin XLR terminals (balanced drive). There are plenty of connection terminals, so you can connect to a PC, CD, TV, etc. The clear and tight sound does not choose any music genre. Serial ODID0019101JP (Mizushima Itsuro)
Maintenance information: 2024.4.22 operation confirmed
Accessories: remote control, instruction manual (damaged), power cable
Main specifications: sampling frequency/USB input (PCM) 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 176.4 kHz, 192 kHz, 352.8 kHz, 384 kHz (16, 24, 32 bit) USB input (DSD) 2.8 MHz, 5.6 MHz COAXIAL/OPTICAL/AES/EBU input 32 kHz, 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 176.4 kHz, 192 kHz (16, 24 bit) digital input USB 1 system, COAXIAL2 system, OPTICAL2 system, AES/EBU (XLR3) 1 system analog output unbalance (RCA) 1 system balanced output (XLR3) 1 system (with fixed level/variable switching, with phase switching function) headphone output imbalance (STD) 1 system, balance (XLR3) 1 system, balance ( XLR4) 1 system W296×H101×D271mm 6.3 kg
unopened! Neutrik speakon 2-core connector that can also be connected to a 4-core receptacle (Murakoshi Yoichi)
Maintenance Information: Unopened
Accessories: none
Fidelity-Research headshell Lightweight and highly rigid. It is characterized by an enveloping shape with a thick aluminum press-processed body. There are dullness and small scratches on the exterior (Tamai Jun)
Maintenance information: 2024.4.19 sound output confirmed
Accessories: none
Main specifications: aluminum stamping dead weight 10g
Maintained. This is the X-2000R, the best model in the X series. It boasts performance that surpasses the X-1000R, such as a CA (cobalt amorphous) head and a newly designed equalizer amplifier, and you can listen to damped sounds with little noise due to the DBX installation. There are stains and bumps on the exterior. Serial 20066 (Tamura Eiji)
Maintenance information: 2024.4.18 Maintained (flywheel detachable cleaning and capstan shaft cleaning oil applied, capstan belt replacement, grease applied to the foot wheel stator bearing part. Pinch roller drive mechanical disassembly cleaning and grease application, pinch roller cleaning and pinch roller shaft oil application, tape pass check. Head cleaning and head azimuth angle check adjustment. Left and right impedance roller detachment fall cleaning and oil application, left and right tension arm detachment cleaning and cushion replacement, tension sensor cleaning, and tension roller shaft cleaning oil application. Reel stand tension adjustment (FWD/REV-PLAY winding tension and tension adjustment during FF/ REW) playback and recording AMP electrolytic capacitor check and partial replacement, meter lamp, DBX display lamp replacement, replacement procedure due to deterioration of power supply protection resistance. MIC, LINE, OUTPUT volume contact cleaning Contact cleaning by detaching and disassembling the monitor SW, REC mode SW, tape bias selector SW, and DBX SW. Playback level check and adjustment, recording level and vise check and adjustment, DBX amplifier level check and adjustment, recording and playback tests are excellent. Left and right legs missing additional reference value W&F during self-recording and playback (0.02% (WTD))
Accessories: clamper
Main specifications: 4-track, 2-channel stereo format, W432 x H456 x D268 mm, 21.0 kg
The price has been reduced! 2024/4/7 sales price 1,500 yen A high-precision level instrument that is essential for leveling players. It is a long-selling model with an aluminum body (Tomonori Asae)
Accessories: none