The disposal price has been reduced! Member prices are not applicable. 2024/4/17 sales price 498,000 yen The company's best integrated amplifier designed by generously pouring the technical power of the Si 3000. The design, such as dual mono construction, the shortest signal path, and the chassis created by making full use of alloy technology, is a masterpiece that gives off a unique personality. The driving power is excellent in the smooth mid-high range with a high sense of SN, and in the mid to low range with a high sense of sound pressure. The highest amount of information as a premain amplifier is attractive. There are small scratches on the exterior. Serial Y 2008 (Yonejima Satoshi)
Maintenance information: 2024.4.17 Maintained (SP knob removal screw correction and cleaning. Cord clamp misalignment fix screw misalignment fix Internal inspection, cleaning, remote control, light reception check. Bias and offset checks. (Voice check for each input/output)
Accessories: remote control, instruction manual, power cord
Main Specifications: Output: 175W+175W (8Ω) Input Terminals: RCA LINE x 5 (Caldas Rhodium Plating), XLR LINE x 1 (No. 2 HOT) Output Terminal: RCA x 2 Frequency Characteristics: 10Hz - 35kHz
W450×H170×D480mm 27kg
The disposal price has been reduced! (Member prices are not applicable) 2024/4/14 sales price 198,000 yen This model takes the configuration of the flagship 7S1. The quality of the sound has improved compared to the predecessor, and in particular, the thickness of the sound has increased from low to medium, making it a well-balanced sound. The clear and clean spatial expression and smooth, gentle mid-high sound are attractive. There is a scratch on the top plate. Serial 20011208001208 (Fujisawa Yukishi)
Maintenance information: 2024.4.14 Operation confirmed
Accessories: remote control, instruction manual, power cord, connection cord
Main specifications: original mechanical module SACDM-1 1 bit DSD SEIKO NPC SM5866AS D/A converter with external clock terminal W440 x H127 x D413 mm 16.5 kg
The disposal price has been reduced. Member discounts are not applicable. 2024/4/4 sales price 198,000 yen SACD player equipped with a discrete DAC. Equipped with a high-performance USB-DAC, it is compatible with a wide range of issues up to 384 kHz/DSD 11.2 MHz. The response is much better than the previous game due to the excellent FPGA. The sound quality, which has an excellent sense of subtlety, is suitable for long-term auditions, and it is an attractive player with a sense of quality with fine sound particles in the air. Serial AQE15200201004 (Mizushima Itsuro)
Maintenance information: 2024.4.4 operation confirmed
Accessories: remote control, instruction manual, power cable, connection cable, original box
Main specifications: Playback frequency characteristics 2 Hz to 50 kHz (SACD), 2 Hz-20 kHz (CD) playback compatible sampling frequency (USB) PCM44.1 kHz to 384 kHz, DSD 2.8 to 11.2 MHz, (COAX) PCM44.1 to 192 kHz W440 × H123 × D419 mm 16.4 kg
The disposal price has been reduced. Member discounts are not applicable. 2024/4/9 sales price 348,000 yen manufacturer maintenance completed! It is a transparent SACD player with a delicate sound. This model has a reputation for its high degree of perfection using a Sony drive. The thickness of the sound. The high level of musicality shines through the excellent balance of each SPEC, such as the high instantaneous power and large sound field space. There are light stains on the exterior and front panel, and there is also dullness and a feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.4.9 Manufacturer maintained (resistor replacement/characteristic adjustment. Open and close belt open/close switch replacement. (Interior and exterior cleaning, operation/characteristic aging tests, insulation/safety tests completed)
Accessories: remote control, instruction manual, power cord, connection cord
Main specifications: output balance 1 system, unbalance 1 system dimensions W475 x H151 x D397 mm, weight 17.7 kg
The disposal price has been reduced. Member discounts are not applicable. 2024/4/10 sales price 450,000 yen The output tube has been replaced with a GE 6550! Genuine Electri Stainless steel chassis version of the 2nd generation reprinted model. It is a model that stands out for its good SNR feel and improved fine particle feel, etc., and its depth of pocket is attractive, compatible with the latest sources. The heavy, vintage look is also wonderful. The hood is missing, there are many transformer paint peeling repair marks on the exterior, and the letters on the back have disappeared. Serial E10122 (Murakoshi Yoichi)
Maintenance information: 2017.10.18 Maintained (SW/VR disassembly contacts repolished, oxidized/vulcanized grease coated. Replace all 9P socket pins Voltage check for each part, check input/output waveforms, load test (at 1kHz, 8Ω load: 75W x 2) sound output test)
Accessories: instruction manual (copy)
Main specifications: 6550 push-pull input 2 systems (XLR/RCA) rated output 75W+75W (4/8/16Ω) mono 150W (2/4/8Ω) W406 x H190 x D305 mm 30.5 kg
The price has been drastically reduced. 2024/4/19 sales price 698,000 yen Maintained in 2023! Hammer tone BBC specification! Strobe platter included! This is a combination of GARRARD 301 and SME 3009S2, which has an attractive gripping, and gutsy sound. The high sensitivity short arm with high utility and the sound produced from the idler turntable is exhilarating and very comfortable. It is a record player system that allows you to experience the true essence of analog. Since the shaft on the back of the motor is long, an Audio-Technica insulator is included. *Currently, the pulley is 60 Hz, but the strobe platter is for 50 Hz (Murakoshi Yoichi)
Maintenance information: 2023.8.15 maintenance (motor disassembly/check, lubrication, assembly. Main bearing disassembly, cleaning, oil injection, oil sealant application, assembly. Overall cleaning. idler cleaning. Motor suspension spring rubber replacement. Transport plate fixing clip. Linguage distortion correction. Noise suppressor rebuild replacement. Mount rubber washer added. 50Hz pulley adjustment added. SME3009S2 cleaning. Mount grommet replacement Contact cleaning. (Running test)
Accessories: insulator (audio technica AT616)
Main specifications: 301: idler drive 33, 45, 78 rotations compatible 3009S2: short arm static balance type, total length 265 mm, overhang 15 mm, needle pressure (when 1 rider weight is attached) 1 memory 0.25 g step 0 g to maximum 2.5 g (when 2 rider weights are attached) 1 memory 0.5 step 0 g to maximum 5 g cartridge dead weight up to 28 g size W480 x D406 x H238 mm weight 12.5 kg
The disposal price has been reduced. Member discounts are not applicable. 2024/4/19 sales price 178,000 yen Maintained. A rare Fisher tube control amplifier. The 2 phono inputs are attractive. The high range is decent, but the round, rich, and powerful mid-range is unique to FISHER. The sound is light, bright and friendly. *Only CHANNEL A is valid for EQUALIZATION LP and 78 (Murakoshi Yoichi)
Maintenance information: 2024.4.17 maintenance (re-strengthening treatment for all selector knobs (*Please do not remove them as much as possible.) Volume disassembly grease up treatment for BASS, main volume disassembly, cleaning and repair (due to the structure, there are some gang errors and sound leaks when narrowed down to a minimum. (If you are concerned, only RIAA 1 and AUX1 can be adjusted with LEVEL SET on the top surface.) Electrolytic capacitor 1000 μF replacement, vacuum tube socket and RCA jack re-caulking repair. Operation check with AC 100 to 117 V) 2021.5.15 maintained (repair of poor contact with various parts, correction of lever deformation points, replacement of 30/30/10/10 μF defects, vacuum tube socket and RCA jack caulk repair ※ Since the main volume is a special type with a loudness terminal, some gang errors will occur after 12:00. AUX1 and PHONO can be fine-tuned with the LEVEL SET on the top. *Other operation checks have been made (4 vacuum tube shield cases are missing)
Accessories: Service Manual (English)
Main specifications: Vacuum tube 12AX7, 12AT7, 6V4 using PHONO2 system Dimensions W390 x H120 x D210 mm 6.6 kg
The disposal price has been reduced. Member discounts are not applicable. 2024/4/21 sales price 148,000 yen ※ The hinge is damaged, but there are no replacement parts, so this is the current situation. Maintained! Armless PD444 Long arms and short arms can be set, and an original system can be built by placing an arm of your choice on it. The highly rigid chassis and flexible suspension create a tight, easy-to-see sound (Murakoshi Yoichi)
Maintenance information: 2024.4.20 maintenance (power supply circuit, motor servo circuit electrolytic capacitor replacement, power lamp LED replacement, each rotation lock check. (Arm base lock lever with E-ring attachment)
Accessories: motor fixing beads, EP adapter, dust cover, instruction manual, armrest
Main specifications: Direct drive system, quartz control, 30cm, die-cast aluminum turntable, 33/45 rpm, 2 speed switching, W664 x H160 x D392 mm, 22 kg
The price has been reduced. 2024/4/22 sales price 128,000 yen Maintained! A famous machine 44 with an easy-to-handle RCA terminal added to the rear terminal of the Quad control amplifier. The British QUAD's small preamp is a perfect balance between the freshness and richness of character. You can enjoy a calm, high-quality sound when paired with the same speakers made in England (Murakoshi Yoichi)
Maintenance information: 2024.4.18 maintenance (internal all checks, power supply filter C ± B bypass C replacement, balance VOL cut off sound → cleaning, check each board)
Accessories: 2 DIN input cords, power cord, instruction manual (copy)
Main specifications: 2 LINE inputs, 2 TAPE2 systems (DIN input or more), 1 PHONO input system, Phono sensitivity 1m/3m/10mV switching W321 x H103 x D203 mm 4 kg
A line transformer equipped with 2 WE repeat coil 111C transformers (transformers for telephone voice relay). Although the range is narrow, the thickness has increased and the analog-like sound quality is very pleasant to the ears. There is a small scar on the dust (Oikawa Tetsuji)
Maintenance information: 2024.4.22 operation confirmed
Main specifications: input/van lance x 1 system unbalance x 1 system output/van lance x 1 system unbalance x 1 system 150 x 160 x 155 mm 6.66 kg (actual measurement)
Single bottle sale military high reliability tube ECC83/M8137 equivalent tube code: 641 R1K1 box plate measurement value 44 (rejected value 32) with original box ※The measured values indicate gM values measured with the testing machine TV-7 (Kojima Yosuke)
Accessories: white box
Single bottle sale military high reliability tube ECC83/M8137 equivalent tube code: 641 R3I4 box plate measurement value 46 (rejected value 32) with original box ※The measured values indicate gM values measured with the testing machine TV-7 (Kojima Yosuke)
Accessories: original box
Single bottle sale military high reliability tube ECC83/M8137 equivalent tube code: 641 R3I4 box plate measurement value 46 (rejected value 32) with original box ※The measured values indicate gM values measured with the testing machine TV-7 (Kojima Yosuke)
Accessories: original box
Single bottle sale military high reliability tube ECC83/M8137 equivalent tube code: 641 R3I4 box plate measurement value 46 (rejected value 32) with original box ※The measured values indicate gM values measured with the testing machine TV-7 (Kojima Yosuke)
Accessories: original box
Single bottle sale military high reliability tube ECC83/M8137 equivalent tube code: 641 R3I4 box plate measurement value 48 (rejected value 32) with original box ※The measured values indicate gM values measured with the testing machine TV-7 (Kojima Yosuke)
Accessories: original box