Maintained by Electri, including replacing the windshield panel with a new one! A pre-main amplifier with a built-in McIntosh traditional output transformer. You can enjoy the rich and rich sound world typical of Macintosh. This is one that combines the sound appeal of modern and old McKinn. The sense of power that makes you feel the strength is similar to that of a separate amplifier. The exterior is dull. Serial JLF1440 (Fujisawa Yukishi)
Maintenance information: 2024.3.28 manufacturer maintained (windshield panel replacement. Replace the Oring to fix the switch bezel. Due to a problem with the operational amplifier, characteristics were poor, and the voltage was unstable, so a lot of pop noise was generated when the front volume display was off. IC exchange. Capacitors were replaced at various other locations. Replaced due to filter capacitor deterioration. Other relays, transistors, etc. have been replaced just in case, but please be aware that the pop noise of this unit is difficult to completely remove due to product specifications, so it can be heard slightly depending on when the power is turned on. Replace all front lamps. Lamp fixing grommet replacement. There is a difference in meter runout when the volume is low, but when the output is raised about 3/4, the difference is not very noticeable. Due to specifications due to individual differences in parts, improvements are difficult, so adjustments have been made so that they fit at a position of approximately half a meter. Same confirmation and other inspections.)
Accessories: remote control, instruction manual
Main specifications: 150W+150W (8/4/2Ω) phono input MM dimensions W445 x H179 x D508 mm weight 30 kg
Maintained! A control amplifier with a thorough review of the equalizer amplifier, which is important for record playback. It's perfect for those who want to make analog sounds moist. The retro look is also GOOD. The exterior has a feeling of use such as dullness and small scratches. Serial 111076 (Fujisawa Yukishi)
Maintenance information: 2024.3.7 maintained (rec function, tape monitor, gain, tape monitor, LOW HIGH filter, mode switch disassembly, polishing grease application, other volumes, switch cleaning, solder repair, power cord replacement, capacitor replacement, pin jack cleaning, operation check. (*The front pin jack input is fixed with rivets, so there is a lag ※When switching the impedance of the phono, the resistance value changes and the operation is normal, but there is not much change)
Accessories: none
Main specifications: phono circuit: MM2 system Phono 1:2.5 mV/50 kΩ Phono 2:2.5 mV/30 kΩ, 50 kΩ, 100 kΩ W410 × H170 × D270 mm 7 kg
*The lower front panel has been changed to a PRA-1003 panel. Maintained! A stereo power amplifier using a DC amplifier system. The power supply unit is equipped with 2 independent power transformers on the left and right sides. The powerful and clear sound emanating from the sturdy body is impressive! The well-designed analog meters are beautiful. You can enjoy all genres with very good extrusion and a sound that is not addictive. There are stains and small scratches throughout the exterior. Serial 110456 (Fujisawa Yukishi)
Maintenance information: 2024.3.7 Maintained (LR output meter relay replacement, LR power amplifier solder repair, differential circuit part FET, transistor replacement, pin jack replacement, interior and exterior inspection cleaning*Since the ceiling panel cannot be obtained from this unit, it remains the same)
Accessories: none
Main specifications: rated output 100W+100W (4Ω) 85W+85W (8Ω) transmission frequency characteristics DC to 100kHz W410 × H200 × D285 mm 17 kg
The price has been drastically reduced! 2024/2/16 sales price 448,000 yen Maintained in 2022/7! Comes with a hood! This is a famous gem that has both thickness and sex appeal while making a quick sound. There is no boomy sound, which is a drawback of vacuum tube amplifiers, and it is a vintage sound that is still popular today due to its good tone and good balance. The exterior has stains, stains, paint peeling, etc. Serial 2417 (Tomoho Asaine)
Maintenance information: 2022.7.13 Maintained (replacement of 2 vacuum tubes 6CA7 deteriorated, 2 electrolytic capacitors → block capacitors replaced with 47 μF x 2, resistance 1W domestically produced → replaced with USA-made, bottom leg deterioration replacement/vacuum tube socket and RCA jack re-caulking repair. *Other operation checks have been performed (measured at 32 to 43 W SP: 8 Ω at rated output AC 100 to 117 V)
2021.3.28 Maintained (vacuum tube socket partially loosened, re-caulking repair, other RCA jack re-caulking repairs and AC BAL. /DC BAL. /BIAS realignment implemented. Rated output AC 100 to 117 V measured at 32 to 41 W SP: 8 Ω) Maintained on 2015.1.23 (2 VT6BH6 noisy replacements · block.c40/20/20 μf deterioration exchange and external coating · R1/2W 100Ω combustion exchange · Fuse3A SlowBlow ⇒ 2.5A SlowBlow original replacement · EL.C10μF ⇒ 20 μF original replacement x 2 ※ other parts check ( EL.c has been added to Block.c2 by another company. Other EL.C has been replaced by another company))
Accessories: none
Main specifications: vacuum tube EL34, 6CG7 x 2, 6BH6 x 2 output 35W+35W W346 x H192 x D250 mm 21.9 kg
Compact belt drive CD player. The D/A converter section is a dual mono configuration equipped with 2 units of the latest Barbrown PCM1792 (192 kHz/24 bit) independently on the left and right. The drive method unique to CEC contributes to the smoothness of the sound. The exterior is dull and dirty. Also, the buttons on the remote control have changed color and the rubber part has deteriorated. (SATO Wataru)
Maintenance information: 2024.3.26 Operation confirmed
Accessories: remote control, power cord, stabilizer
Main specifications: analog output: 1 unbalanced and balanced system, digital output: TOS, 1 coaxial, AES/EBU system each W217.5 x D448 x H111 mm approx. 7.2 kg
It is a famous machine with a velvet transformer that was maintained in 2016, and you can enjoy rich sound with stable operation. The fresh, glossy tone in the mid to high range has a different appeal from the MC275. The input terminals are gold-plated terminals. Appearance, loss of lettering, light rust, dullness, scuffs, etc., and a sense of use appropriate for the age can be seen (Kanai Hidetsugu)
Maintenance information: 2016.9.30 maintained (VT12AX7 replacement block.c100μf x 2 replacements, 2 block.c80/40/30/20 μf replacements, AC cord exchange, thermistor replacement, 4 R1/2W replacements, VT socket and RCA jack caulking repair*Other parts check OIL.C and ELC have been replaced by other companies (B.B B.C. SPRAGUE Mallory, etc.)
Accessories: none
Main specifications: 40W+40W 6L6GCPP vacuum tube 6L6GC × 4 12AX7 × 3 12AU7x2 12BH7 × 2 frequency characteristics 16 to 40,000 Hz dimensions W400 × D265 × H195 mm weight 25 kg
Fully maintained in 2016, exterior repairs have been carried out again, and the finish is very beautiful. The original 4343 by All Alnico, the original 4343 of 4343! The crisp low frequencies and punchy high frequencies are unbearable, and popularity continues unabated even now. The dynamic sound typical of JBL has been revived due to maintenance. It is a famous monitor that can best reproduce the sound source of on-microphone recordings regardless of age or genre (Kobayashi Hitoshi)
Maintenance information: 2024.3.16 maintained (exterior repair/cleaning, velcro replacement, saran net repair/frame repair) 2016.4.7 maintained ([exterior] exterior paint, chipped putty repair/bulge part repair, front and rear baffle painting, saran net replacement, woofer coker cone paper coating, unit detachment [2231A] edge replacement [2121] edge replacement [2420] diaphragm Installation adjustment, DCR (44563/5.5 ohm diaphragm no scratch), DCR (43429/5.7 ohm diaphragm no scratch) [network] remove the modified LF wiring. Reinstall and rewire the terminals (external products) and clean them. Replace faulty resistors (both sides). ATT exchange. INT/EXT switch-over SW cleaning Capacitor replacement. Check the input/output waveform and balance, and check the sound output. Frequency characteristic measurement check (~ 42 kHz)
Accessories: saran net diffuser
Main specifications: 4 way 4 speaker bass reflex type 2405/2420/2121/2231A crossover 300Hz/1250Hz/9500Hz 8Ω 93dB W635 x H1,051 x D435 mm 83.9 kg/book
The price has been reduced! 2024/3/7 sales price 79,800 yen Maintained! 120V specification SUMO control amplifier hosted by amplifier design genius James Bongiorno. Compared to amplifiers from the GAS era, the sound is cleaner, but the elastic low frequency bounce method is still alive and well. It is one that uses toroidal transformers and high quality parts, and makes you feel that they are particular about it. On the exterior, abrasions and line scratches are conspicuous on the top plate. Serial H (Yonejima Satoshi)
Maintenance information: 2024.3.25 Maintained (Earth float re-fixed. (*Since AC120 is specified, a hum may occur at 100V.)
2024.3.7 Maintained (internal inspection check, PHONO changeover SW, INPUT/TAPE changeover SW cleaning. Transistors, resistors, and capacitors can be checked. Operation check)
Accessories: No accessories
Main specifications: 6 inputs, 2 PRE OUT terminals, W480 x H40 x D220 mm, weight 8.0 kg
The disposal price has been reduced! (Member prices are not applicable) 2024/3/22 sales price 128,000 yen Maintained! Quad power amplifier Despite its compact body, you can enjoy a smooth, thick sound. It really goes well with speakers made in England, and makes you listen to 70s analog sound with a sense of dynamism. The exterior has a feeling of use such as dullness. Serial 41000 (Tomoho Asaine)
Maintenance Information: 2024.3.22 Maintained! (Internal check DC cut C, gain setting C, etc., exchange Tr, etc. check operation check, DIN4P-RCA female cable creation)
Accessories: power cable
Main specifications: 100W+100W frequency characteristics 20 to 20 kHz dimensions W341 x H115 x D195 mm weight 9 kg
The disposal price has been reduced! (Member prices are not applicable) 2024/2/10 sales price 198,000 yen Maintained! According to the 117V specification of the tubular mono FM tuner, reception is unstable at 100V. The Japanese band has been changed, and reception sensitivity is good. It is a tuner that strongly shows the characteristics of Mackin's sound, which is thick, soft, and glossy. There is corrosion and rust throughout the exterior. Serial 292099 (Tomoho Asaine)
Maintenance information: 2024.2.10 Maintained (meter readjustment with coil and right side volume, left side lamp off replacement, IF/RF/MPX readjusted)
2018.2.22 Maintained (VT12AT7 replacement, MPX section transistor replacement, RF/IF/MPX re-adjustment)
2016.1.25 Maintained (6 additional VT shortages. 2 VT replacements 4 additional ceramic C for BAND EX Ceramic C replacement. Chemical C exchange. Front lamp repair, block.C50uf x 4 replacement Step up transformer 100V ⇒ 117V added)
Accessories: 117V step up transformer
Main specifications: FM dedicated tuner W400 x H130 x D300 mm 8.6 kg
Refreshed and maintained in 2021. It's the long-awaited blue baffle 4344. The vividness of the performance is expressed dynamically with a full mid-low range that sets it apart from the tall boy type, and a powerful sound image. It shows an unrivaled compatibility with jazz from the 70s and 90s, soul, rock, etc., even now. There are repair marks on the exterior (Hiura Katsuji)
Maintenance information: 2021.5.1 maintained (exterior repair/polishing/oil finish front and rear baffle coating saran net replacement saran plate repair diffuser cleaning woofer maintenance mid maintenance driver maintenance (magnetic circuit gap cleaning/center adjustment sound absorbing material replacement screw replacement various cleaning)
Tweeter maintenance (magnetic circuit gap cleaning/center adjustment, various cleaning) unit detachable terminal rust removal, acid washing, insulation bush & mounting screws replacement, internal connection terminal replacement from faston to round terminal, ATT brand new replacement, INT/EXT switching SW contact sulfide removal, polishing, and cleaning. Frequency characteristic measurement check (~ 42 kHz) is performed, and only 1 μF for UH (tweeter) is exchanged, input/output waveform and balance confirmation sound output check)
Accessories: saran net diffuser
Main specifications: 4-way 4-speaker bass reflex unit 2235H 2122H 2421B 2405H frequency band 35 Hz to 20 kHz 8 ohms sound pressure level 93 dB W635 x H1,051 x D435 mm 96 kg
German MM/MC compatible phono equalizer. The speed of sound is outstanding. The sound quality is straight without turbidity, and the volume and power of the bass are excellent, and the rhythm band can be heard richly. It's an excellent product that also allows you to get good MC gain. There is an MM/MC changeover switch on the bottom, making it very easy to use. ※There is a note on the original box. The exterior is dull. Serial 00781 (Fujisawa Yukishi)
Maintenance information: 2024.3.25 Operation confirmed
Accessories: original box
Main Specifications: 60dB (MC) 40dB (MM) Input Impedance: 800Ω/MC, 47kΩ/mm W50 ✕ H30 ✕ D74mm 0.2 kg
The price has been drastically reduced. 2024/3/12 sales price 28,000 yen*2 shelves are missing. This model has an open form and is perfect for heat dissipation. This is a weight rack whose spacing can be changed with L-shaped brackets and screws. There are many dents and line marks on the exterior, top surface, and shelf boards, and dullness and a feeling of use can also be seen (Kobayashi Hitoshi)
Accessories: none
Main specifications: shelf board size W525 x D470 mm total load capacity approx. 250 kg W626 x D582 x H1122 mm 64 kg
※You can check the sound output, but the needle tip has changed, so it's cheap. Popular model representing Sure, which challenged the limits of MM cartridges (Murakoshi Yoichi)
Maintenance information: 2023.11.25 Sound confirmation (A sound was made during the check. Needle bonded closure (It will be handed over as is.)
Accessories: none
Main specifications: mm type frequency range 10 Hz to 25,000 Hz output voltage 3.5 mV needle pressure 0.75 g to 1.25 g weight 6 g
The disposal price has been reduced! (Member prices are not applicable) 2024/3/1 sales price 448,000 yen Internal overhauls such as capacitor replacement have been completed! 220V Quad vintage pre-power system with 100-220V step-up transformer The thickness, luster, and tension of the sound are all emotionally composed, and perfectly express the sound of the instrument. Anyway, it has thick, firm mid-bass, and the tasteful sound unique to vacuum tubes is impressive. The exterior has dullness, stains, scratches, etc. Serial 45808/26904/25186 (Tamura Eiji)
Maintenance information: 2023.12.27 Maintained (power transformer rewound repair. Common resistance: 3 W and 1 W deterioration replacements x 2 QUAD22 switch cover added and 2 deteriorated replacements. Replace 3 block capacitors with 22 μF electrolytic capacitors. Replace 2 Mylar capacitors with 5600 pF deterioration. Balance volume exchange. 6 1W resistors and 1/2W deterioration replacements CD input countermeasure → 4 additional 1/2W resistors for Radio1 only. Vacuum tube socket and RCA jack caulk repair. Operation has also been checked with AC 220V (measured at rated output 25W SP: 8Ω)
Accessories: copy of instruction manual, power cable, 220V step-up transformer
Main specifications: [QUAD22] EF86 × 2 ECC83 × 2 input PHONO, RADIO, TAPE W267 × H89 × D148 mm 3.2 kg [QUAD2] KT66 × 4 EF86 × 2 GZ32 15W+15W W321 × H162 × D119 mm 8.2 kg/unit
The disposal price has been reduced. Member prices are not applicable. 2024.3.17 sales price 598,000 yen Both the interior and exterior were overhauled in 2018, including full exterior maintenance, new saran net replacement, attenuator replacement, etc. A large speaker equipped with a 604-8G Alnico unit. I think the good positioning of coaxial units is that they are easy to use even in general households even though they are large in size. The outstanding high frequencies and the detailed mid and low frequencies are satisfying to listen to. The exterior has been maintained and is in a beautiful state (Sasaki Shota)
Maintenance information: 2024.3.17 exterior repair 2018.1.14 maintained (terminal cable soldering redone. ATT exchange. Check the input/output waveform and balance, and check the sound output. A frequency characteristic measurement check (~ 42 kHz) is performed, and the original capacitor is continuously used. Exterior polished and oiled Rear baffle paint Saran net replacement. Unit maintenance (single-side low frequency magnetic circuit slit cleaning/center adjustment, both high frequency magnetic circuit slit cleaning/center and characteristic adjustment) unit detachment/terminal replacement.)
Accessories: none
Main specifications: 38 cm coaxial 2 way (604-8G) original enclosure 2 way 1 speaker bass reflex floor type frequency characteristics 20 to 22 kHz crossover 1.5 kHz sound pressure level 103 dB impedance 8 ohms dimensions W660 x H1016 x D457 mm weight approx. 62.6 kg
The disposal price has been reduced. Member discounts are not applicable. 2023/6/24 sales price 178,000 yen Maintenance has been carried out and deteriorated capacitors etc. have been replaced! A newly created power supply is included. Genuine RF MC cartridge head amplifier The RCA terminal specification makes it easy to use, and has a separate power supply structure. The delicate, clear, and powerful sound is attractive (Daiki Goto)
Maintenance information: 2023.6.24 maintained (new power supply manufactured because the power module is defective but cannot be repaired, all deteriorated capacitors replaced, pin jack deterioration replaced, gain changeover switch replaced due to poor contact, each gain readjusted, operation inspected, (there are no current problems with the module)
Accessories: copy of instruction manual
Main specifications: Gain can be adjusted in 3 levels; input impedance can be used up to 45 ohms W175 x H60 x D210 mm 1.4 kg
Maintained! A classic British Quad stereo power amplifier. Small in size yet full torque. The sound, which is as deep as a tube amp, exudes an appeal that won't fade. There is a feeling of use such as dullness. Serial 3121 (Takasaki Atsushi)
Maintenance information: 2024.3.22 maintained (INPUT DIN4P and AC connector replacement, DIN4P-RCA x 2 (1m) creation, internal check, DC cut C, coupling C replacement, RCH offset VOL exchange, constant change in constant voltage circuit)
Accessories: copy of manual, power cord, connection cord
Main specifications: 45W+45W W120×H159×D324mm 8.2 kg
A speaker stand with a firm and stable feel. The size is just right for medium speakers such as the NS-1000M. By changing the direction of the middle plate, the width can be changed from about 320 mm to 360 mm. The exterior has dirt and some carpet on it (Tamura Eiji)
Accessories: none
Main specifications: Speaker stand W350 x D300 x H247 mm approx. 6 kg/book
Maintained! Sony's highest-grade 5-channel vari-controlled FM stereo tuner at the time. Equipped with a FET, the treble extension is excellent, and it also has the thickness unique to varicones. The retro and simple panel design is also attractive. There are dullness, small scratches, etc. appropriate for the model year. Serial 204747 (Tomoho Asaine)
Maintenance information: 2024.3.19 Maintained (power switch lever shaft repair. Adjustment of all items related to high frequency and MPX. The dial lighting and meter certification lamp were changed to LED. (Measures to prevent abnormal noise when the tuning dial is rotated, operation check)
Accessories: none
Main specifications: FM stereo tuner, reception frequency 76 MHz to 90 MHz, frequency characteristics, 20 Hz to 15 kHz, antenna terminal, 300 ohm balance, 75 ohm unbalance, W400 x H145 x D310 mm, 9.2 kg
Maintained! A stereo premain amplifier developed by inheriting CA-1000 technology. It is an amplifier that can evaluate pure sound quality without habit. The straight tone and glossy high frequencies give an impression. Even though it's an old model, it doesn't feel that the range is narrow, and it goes perfectly with rock, jazz, drums, and wind music. The exterior is dull, scratched, etc. (Tamai Jun)
Maintenance information: 2024.3.10 Maintained (speaker terminal replacement, power cord replacement, power supply circuit, tone control circuit, main amplifier circuit, etc., deterioration resistance and transistor exchange switch and volume contacts disassembly polishing input/output pin jack polishing*The circuit is not stable immediately after turning on the power supply, so when the filter or tone switch is switched, it makes a crackling sound. (If you wait a little while, it won't bother you)
Accessories: none
Main specifications: Effective output 20Hz to 20kHz when operating on both channels, 10W+10W (8Ω, Class A operation), power supply voltage C100
V 50Hz/60Hz Power Consumption Rating 190W Maximum 300W External Dimensions 436 x H144 x D323 mm Weight 13.5 kg
The disposal price has been reduced. Member prices are not applicable. 2023/12/30 sales price 100,000 yen Maintained! D/A converter incorporating a 20 bit DAC chip manufactured by Barbrown. The mellow tone is attractive. It adds an analog-like nuance to the sound of the CD. The exterior is dull and has small scratches (Oikawa Tetsuji)
Maintenance information: 2023.12.30 Maintained (replacement solder and pattern correction board electrolyte cleaning due to loss of exchange resistance due to electrolyte condenser fluid leakage, input/output voice check for each FS)
Accessories: none
Main Specifications: Barb Brown 20-bit heavyweight toroidal power transformer W430 × H70 × D280 mm 7.5 kg
This is a rare Audio-Technica sampling rate converter. The output can be changed to 32/44.1/48khz. It's an item that you can enjoy in a variety of ways, such as recording and playback. Externally, there is a scratch on the top plate. Serial 644035 (Tamura Eiji)
Maintenance information: 2024.3.3 operation confirmed
Accessories: none
Main specifications: input (32/44.1/48 kHz) 3 systems: optical/coaxial output (32/44.1/48 kHz) 1 system: optical/coaxial
The disposal price has been reduced! (Member discounts are not applicable) 2023/12/18 sales price 79,800 yen Maintained! JBL professional 2 inch screwdriver It is an item that continues to be used today in large horn systems, etc. The quality unique to titanium diaphragms makes the vocal breathing, drum hi-hat, and outstanding realism no matter which one you take. The exterior has dullness, scratches, rust, etc. due to use over time. Serial 73228 88138 (Tomonori Asaine)
Maintenance information: 2023.12.18 maintained (diaphragm installation adjustment throat cleaning DCR (no 688138/7.4 Ω vibration damage)
DCR (73228/7.3 ohm, no vibration damage) *The color of the diaphragm on one side is different. (There is an exchange history, but it is an original and not a replacement)
Accessories: none
Main specifications: throat diameter 5 cm; allowable input: 100 W; sound pressure level: 111 dB/w/m; frequency characteristics: 500 Hz to 20 kHz; crossover frequency: 500 Hz or more; 16 ohms; diameter: 235 x depth: 132 mm; 13.6 kg/1
Maintained. The successor that inherited the sound of the D series. A model where you can feel the uniqueness of Sansui at the time due to the extrusion of low frequencies and the creation of sound. They are energetic, playable, and go great with jazz and rock, and are compatible not only with MM but also with MC, making analog fans happy. There is dirt on the top plate (Sasaki Shota)
Maintenance information: 2024.2.8 maintained (main amplifier circuit transistor, film capacitor, DC, bias semi-fixed volume replacement, output relay replacement, power supply circuit floating resistor replacement, balance volume exchange, input selector, reck-out, tone switch disassembly polishing grease application, each volume, switch cleaning, interior and exterior inspection cleaning, pin jack polishing, adjustment inspection)
Accessories: none
Main specifications: execution output 80W+80W (8Ω) damping factor 100 rated power consumption 200W phono MM/MC compatible W460 x H160 x D404 mm weight 13.2 kg
Maintained by the manufacturer! The third generation of the Denon 2000 series. Frequency characteristics have been improved and low noise has been achieved by reviewing power parts, volume circuits, etc., while keeping the low frequency range with a sense of volume unique to the company and the high frequency range with elongation unchanged. Of course, it is a big hit model that is compatible with modern sauces, and doesn't make you feel that it's poor to listen to old sources. In addition to dullness and small scratches on the exterior, there is a feeling of use such as slight stickiness. Serial 10212501972 (Hiroki Aso)
Maintenance information: 2024.2.5 maintained (function SW source direct SW disassembly repair SP relay replacement and other parts inspection operation test)
Accessories: instruction manual power cable
Main specifications: output 80W+80W (8Ω) PHONO (MM/MC) bi-wiring compatible dimensions W434 x H180 x D478 mm weight 22 kg
Replacement needle for TRIO/KENWOOD cartridge V-37 It's unchecked because it's only an exchange needle (Kobayashi Hitoshi)
Maintenance information: operation unconfirmed
Accessories: original box
※One piece only. Details unknown, this is an ALTEC 604 or ALTEC 1 inch driver diaphragm. It seems to be an inexpensive interchangeable product (Daiki Goto)
Accessories: none
The A2500 is a tube type power amplifier kit that has been replaced with speaker terminals that are easy to use even for beginners. 6AQ8 for the first stage and 12AU7 for the phase reversal stage both use triodes. Since triodes are used across all stages, the sound is taut and bright, with excellent nude characteristics. The exterior has dullness over time, rust, and small scratches. Serial 560561 (Miura Kimiya)
Maintenance information: 2018.4.28 Maintained (printed circuit board resistor replaced. (Adjustment characteristics check OK) 2014.11.21 maintenance completed (input VR, vacuum tube socket, coupling capacitor, SP terminal, BIAS DC BAL, semi-VR, each deterioration exchange, adjustment, characteristic check OK)
Accessories: instruction manual
Main specifications: 6 RA8 push-pull 6 RA8 x 4/12 AU7 x 2/6AQ8 10W+10W W410 x H145 (with hood) x D190 mm 9.6 kg
You can change the position of the steel rack and shelves with casters. There are many stains, scratches, and stains on the exterior (Takimoto Yutaka)
Accessories: none
Main specifications: W540 x H1355 x D680 mm 49.6 kg (actual measurement)
You can change the position of the steel rack and shelves with casters. There are many stains, scratches, and stains on the exterior (Takimoto Yutaka)
Accessories: none
Main specifications: W540 x H1355 x D680 mm 49.6 kg (actual measurement)
The price has been reduced. 2022/7/4 sales price 12,000 yen 2.5mm plug specification for genuine balance cable for IER-Z1R. Shafts have been exchanged with perfect accuracy. If you have an DAP with a 2.5 mm balance terminal such as Astell&Kern, this is for you. (SASAKI Shota)
Maintenance information: 2022.7.4 sound output confirmed
Accessories: none
The price has been reduced. 2014/7/13 sales price 198,000 yen 2014/7/13 spring has been exchanged! Columbia Grahonora is a gramophone with an orthodox design that doesn't take up much space. It feels like it's in the narrow range and sounds almost only in the mid range, but it has a retro vibe that sounds like it's playing in the background of a black and white movie. The brakes are good, and pitch control is also very sensitive. There are age stains, scratches, and rust on the exterior as a whole. Spring type (Hei Kazuyuki)
Maintenance information: 2014.7.13 Maintained (spring repair operation confirmed)
Accessories: no accessories
Main specifications: W425 x H345 x D478 mm 17 kg
Hamilex (Hayami Kosan) pedestal speaker stand. The direction of the top plate can be changed to vertical/horizontal orientation according to the speaker, and the mounting direction of the struts can also be changed according to the atmosphere of the speaker to be installed. (Fujisawa Yukishi)
Accessories: Instruction manual
Main specifications: Total load capacity 50 kg (1 unit) W350 × D320 × H400 mm Approx. 5.8 kg/unit