RCA cable 1.9 m Peer Noitric plug is a standard BELDEN line cable that clearly outlines the sound while also having a firm thickness in the mid to low range. The printing on the sheath has disappeared (Kojima Yosuke)
Accessories: none
Stereo mini-phone conversion cable 2.0m cable for converting DAP earphone output etc. to each LR mono phone terminal. The phone terminals are manufactured by Neutrik (Kojima Yosuke)
Accessories: none
RCA cable 4.9 m Peer Noitric plug is a standard BELDEN line cable that clearly outlines the sound while also having a firm thickness in the mid to low range (Kojima Yosuke)
Accessories: none
RCA cable 2.0m Peer Noitric plug is a standard BELDEN line cable that clearly outlines the sound while having a firm thickness in the mid to low range. The printing on the sheath often disappears and there are seal marks on the plug shell (Kojima Yosuke)
Accessories: none
RCA cable 0.5 m Peer Noitric plug is a standard BELDEN line cable that clearly outlines the sound while also having a firm thickness in the mid to low range (Kojima Yosuke)
Accessories: none
RCA cable 0.5 m Peer Noitric plug is a standard BELDEN line cable that clearly outlines the sound while also having a firm thickness in the mid to low range (Kojima Yosuke)
Accessories: none
RCA cable 0.45m Peer Noitric plug is a standard BELDEN line cable that clearly outlines the sound while also having a firm thickness in the mid to low range (Kojima Yosuke)
Accessories: none
RCA cable 0.45m Peer Noitric plug is a standard BELDEN line cable that clearly outlines the sound while also having a firm thickness in the mid to low range (Kojima Yosuke)
Accessories: none
The disposal price has been reduced. Member discounts are not applicable. 2024/4/9 sales price 348,000 yen manufacturer maintenance completed! It is a transparent SACD player with a delicate sound. This model has a reputation for its high degree of perfection using a Sony drive. The thickness of the sound. The high level of musicality shines through the excellent balance of each SPEC, such as the high instantaneous power and large sound field space. There are light stains on the exterior and front panel, and there is also dullness and a feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.4.9 Manufacturer maintained (resistor replacement/characteristic adjustment. Open and close belt open/close switch replacement. (Interior and exterior cleaning, operation/characteristic aging tests, insulation/safety tests completed)
Accessories: remote control, instruction manual, power cord, connection cord
Main specifications: output balance 1 system, unbalance 1 system dimensions W475 x H151 x D397 mm, weight 17.7 kg
Maintained. This is the X-2000R, the best model in the X series. It boasts performance that surpasses the X-1000R, such as a CA (cobalt amorphous) head and a newly designed equalizer amplifier, and you can listen to damped sounds with little noise due to the DBX installation. There are stains and bumps on the exterior. Serial 20066 (Tamura Eiji)
Maintenance information: 2024.4.18 Maintained (flywheel detachable cleaning and capstan shaft cleaning oil applied, capstan belt replacement, grease applied to the foot wheel stator bearing part. Pinch roller drive mechanical disassembly cleaning and grease application, pinch roller cleaning and pinch roller shaft oil application, tape pass check. Head cleaning and head azimuth angle check adjustment. Left and right impedance roller detachment fall cleaning and oil application, left and right tension arm detachment cleaning and cushion replacement, tension sensor cleaning, and tension roller shaft cleaning oil application. Reel stand tension adjustment (FWD/REV-PLAY winding tension and tension adjustment during FF/ REW) playback and recording AMP electrolytic capacitor check and partial replacement, meter lamp, DBX display lamp replacement, replacement procedure due to deterioration of power supply protection resistance. MIC, LINE, OUTPUT volume contact cleaning Contact cleaning by detaching and disassembling the monitor SW, REC mode SW, tape bias selector SW, and DBX SW. Playback level check and adjustment, recording level and vise check and adjustment, DBX amplifier level check and adjustment, recording and playback tests are excellent. Left and right legs missing additional reference value W&F during self-recording and playback (0.02% (WTD))
Accessories: clamper
Main specifications: 4-track, 2-channel stereo format, W432 x H456 x D268 mm, 21.0 kg
The price has been drastically reduced. 2024/4/15 sales price 118,000 yen Maintenance is being carried out in 2020. 60Hz specification. A record player equipped with Ortofon's short arm RS-212 on the TD160. Only the turntable and arm mounts have a floating structure. It is an attractive player with a sharp sound and sound quality typical of Torrens. The springs on the dust cover hinge have deteriorated. There is damage such as scuffs and scratches on the cabinet dust cover. Serial 422455 (Murakoshi Yoichi)
Maintenance information: 2020.10.10 Maintenance completed (arms, arm bases, etc. are cleaned because rubber adhesives adhere to a wide area, etc., removed because the cushion spring is fixed with foreign matter, sub-board rubber adhesive cleaning, motor connection terminals (faston chips) are broken and unstable, arm elevation cannot be disassembled or adjusted, so current status (descent is slightly fast), arm operation, voice check)
Accessories: sub weight, AC adapter
Main specifications: one-step belt drive system, 16-pole synchronous motor, zinc alloy turntable (diameter 30 cm, weight 3.2 kg), W440 x H165 x D350 mm, 11.0 kg
Maintained by the manufacturer! This model was the first to use an ALPHA processor in the best-selling 1650 series. The mid and low frequencies are quite stable, and the balance depicts rich, rich music regardless of genre. There are dents on the front panel and footprints on the top plate (Oikawa Tetsuji)
Maintenance information: 2024.4.17 manufacturer maintained (inside the CD mechanism, loading belt, tray opening/closing SW replacement. The HF level for laser pickups is within the regulations and is fine now. Sound output test)
Accessories: remote control, instruction manual
Main specifications: Real 20-bit 4DAC/Lambda Super Linear Converter with 20-bit 8x oversampling digital filter+GIC 3rd order analog filter frequency characteristics 2Hz to 20kHz W434 x H120 x D340 mm 10.2 kg
Maintained by the manufacturer! This model was the first to use an ALPHA processor in the best-selling 1650 series. The mid and low frequencies are quite stable, and the balance depicts rich, rich music regardless of genre. The exterior has dents on the front panel corner, and there are line scratches, small scratches, dullness, etc. ※The remote control is out of stock (Oikawa Tetsuji)
Maintenance information: 2024.4.17 manufacturer maintained (inside the CD mechanism, loading belt, tray opening/closing SW replacement. VR has been reworked. The HF waveform of the laser pickup is within the regulations and is currently fine. Sound output test)
Accessories: copy of instruction manual ※ remote control missing
Main specifications: Real 20-bit 4DAC/Lambda Super Linear Converter with 20-bit 8x oversampling digital filter+GIC 3rd order analog filter frequency characteristics 2Hz to 20kHz W434 x H120 x D340 mm 10.2 kg
※The rotation is slightly fast, but it is a specification, and since it is cheap, it is currently sold. current product. A fully automatic wireless turntable that combines the traditional analog technology of Technica with convenience. It can be connected to Bluetooth, so you can enjoy recording with wireless headphones, etc. The cartridge is included, and the phone is built-in, so you can easily enjoy it even with system components. There are no particularly large conspicuous wounds (Oikawa Tetsuji)
Maintenance information: 2024.4.15 Operation confirmed
Accessories: cartridge, instruction manual, power adapter, connection cable, EP adapter
Main specifications: belt drive 33/45 rotation W435.6 x H128 x D374 mm 5 kg
The disposal price has been reduced. 2024/3/31 sales price 378,000 yen equipped with a long arm RMG309i for SPU-G shells! The dust cover will be replaced with a new one in 2022. You can enjoy the fluffy feeling unique to Torrens belt drives, and the afterglow of the sound fading away. You can enjoy the rich sound of the SPU, which is firmly scraped out from the depths of the sound groove. The phono cable is made by Canale, and the manufacturer of the armrest is unknown. As for the exterior, there is a slight feeling of use, dullness, etc. on the arms and armrests. Serial 12396 (Murakoshi Yoichi)
Maintenance information: 2022.2.13 maintenance (new dust cover created)
Main specifications: TD-521 belt drive floating system compatible with 33/45/78 main body W550 x H180 x D410 mm 15 kg RMG309 dynamic balance type needle pressure 0 to 7 g total length 408 mm effective length 320 mm overhang 11 mm
Balance cable 0.7 m Peer Noitric plug is a standard BELDEN line cable that clearly outlines the sound yet has a firm thickness in the mid to low range. The printing on the sheath has disappeared (Kojima Yosuke)
Accessories: none
Balance cable 0.6 m Peer Noitric plug is a standard BELDEN line cable that clearly outlines the sound while also having a firm thickness in the mid to low range (Kojima Yosuke)
Accessories: none
Balance cable 0.6 m Peer Noitric plug is a standard BELDEN line cable that clearly outlines the sound while also having a firm thickness in the mid to low range (Kojima Yosuke)
Accessories: none
Balance cable 0.5 m Peer Noitric plug is a standard BELDEN line cable that clearly outlines the sound while also having a firm thickness in the mid to low range (Kojima Yosuke)
Accessories: none
※Only 1 balance cable is 9.9m. This is a standard BELDEN line cable with a firm outline of the Neutrik plug sound, yet has a particularly firm thickness in the mid to low range. The printing on the sheath part has disappeared (Kojima Yosuke)
Accessories: none
※Only 1 balance cable is 4.9m. This is a standard BELDEN line cable with a firm outline of the Neutrik plug sound while also having a firm thickness in the mid to low range. The printing on the sheath part often disappears (Kojima Yosuke)
Accessories: none
※Only 1 balance cable, 4.9m, is a standard BELDEN line cable with a firm outline of the Neutrik plug sound while having a firm thickness in the mid to low range. The printing on the sheath part has disappeared and there are seal marks on the plug shell (Kojima Yosuke)
Accessories: none
* No. 3 hot specification RCA-XLR conversion cable, 3.9 m pair, both end plugs are a standard BELDEN line cable that clearly shows the outline of Neutrik's sound yet has a firm thickness, especially in the mid to low range. The sheath printing disappears a lot (Kojima Yosuke)
Accessories: none
RCA cable 0.5m pair REAN (Neutrik) RCA plug This is a standard BELDEN line cable that clearly outlines the sound while having a firm thickness, especially in the mid to low range (Fujisawa Yukishi)
Maintenance information: 2024.4.16 continuity confirmed
Accessories: No accessories
RCA cable 0.5m pair REAN (Neutrik) RCA plug This is a standard BELDEN line cable that clearly outlines the sound while having a firm thickness, especially in the mid to low range (Fujisawa Yukishi)
Maintenance information: 2024.4.16 continuity confirmed
Accessories: No accessories
Speaker cable A standard BELDEN speaker cable nicknamed “sea snake” with an unprocessed 1.7 m pair end. The cable braided in orange and black is impressive, and it features a tight sound. There is an appearance, dullness, and a feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.4.14 continuity confirmed
Accessories: none
※Inexpensive because it smells like tobacco and is in poor condition. PSE certified product. A popular 6-prong power strip. The metal case has excellent rigidity and shielding, and Belden OFHC material is used for internal wiring. This best-selling model is popular for its thick sound image and ease of use. There is a strong feeling of use on the exterior, dirt, paint peeling, rust, etc. on the entire exterior (Murakoshi Yoichi)
Maintenance information: 2024.4.14 continuity confirmed
Accessories: none
Main specifications: 3P type x 2, 2P type x 4 ports, cable length 2 m
XLR5pin/XLR3pin x 2 conversion cable 0.3 m NC5MXX-B/NC3FXX-B x 2 cable part: BELDEN 1172A There is an abrasion on the sheath (Kojima Yosuke)
Accessories: none
Speaker cable A standard BELDEN speaker cable nicknamed “sea snake” with an untreated 1.0 m pair end. The cable braided in orange and black is impressive, and it features a tight sound. There is an appearance, dullness, and a feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.4.13 continuity confirmed
Accessories: none
Speaker cable A standard BELDEN speaker cable nicknamed “sea snake” with an untreated 0.6 m pair end. The cable braided in orange and black is impressive, and it features a tight sound. There is an appearance, dullness, and a feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.4.13 continuity confirmed
Accessories: none
Speaker cable A standard BELDEN speaker cable nicknamed “sea snake” with an untreated 0.5 m pair end. The cable braided in orange and black is impressive, and it features a tight sound. There is an appearance, dullness, and a feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.4.13 continuity confirmed
Accessories: none
Balance cable 4.0m Peer Noitric plug is a standard BELDEN line cable that clearly outlines the sound while also having a firm thickness in the mid to low range. There is dullness around the plug (Kojima Yosuke)
Accessories: none
Maintained by the manufacturer! Compact belt drive CD player. The D/A converter section is a dual mono configuration equipped with 2 units of the latest Barbrown PCM1792 (192 kHz/24 bit) independently on the left and right. The drive method unique to CEC contributes to the smoothness of the sound. The exterior is dull. Serial T53Z081.2004406 (Fujisawa Yukishi)
Maintenance information: 2024.4.13 manufacturer maintained (pickup, spindle belt replacement, Assy shaft disassembly and cleaning, grease up, confirmation of regeneration operation on an inspection disc)
Accessories: remote control, power cord, stabilizer
Main specifications: analog output: 1 unbalanced and balanced system, digital output: TOS, 1 coaxial, AES/EBU system each W217.5 x D448 x H111 mm approx. 7.2 kg
Speaker cable 2.0m pair A standard BELDEN speaker cable nicknamed “sea snake” with untreated terminals. The cable braided in orange and black is impressive, and it features a tight sound. There is an appearance, dullness, and a feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.4.13 continuity confirmed
Accessories: none
The price has been reduced! 2024/4/7 sales price 2,000 yen ※1 speaker cable, 3.6 m, unprocessed terminal, OFHC conductor, conductor diameter 10 AWG, the highest grade in the STUDIO series. The conductor diameter is 10 AWG (approx. 2.6 mm), and combined with its characteristic internal structure, it is ideal for long-distance transmission. Discoloration and stickiness can be seen on the exterior (Jun Tamai)
Maintenance information: 2024.4.7 continuity confirmed
Accessories: none
*There is a gap in the display panel, which is the current situation. This is the model number DCD-1650 gold model representing DENON. Although it is the first model, the sophisticated design is beautiful. There is a sense of transparency in the mid to high frequencies, and the low frequencies are thick and gentle. In terms of functionality, the range of uses has also been expanded, such as installing a program play of up to 20 songs. There is a slight gap left in ATT. Serial 106154518 (Mizushima Itsuro)
Maintenance information: 2018/4/12 manufacturer maintained (pickup, belt, gear, relay replacement. Solder correction, operation confirmation)
Accessories: copy of instruction manual
Key Specifications: 20-bit Lambda SLC-D/A Converter with pitch control W470 x H122 x D360 mm 11.3 kg
Speaker cable A standard BELDEN speaker cable nicknamed “sea snake” with an unprocessed 1.1 m pair end. It is a cable with thickness and a sense of extrusion in the mid-range (Murakoshi Yoichi)
Maintenance information: 2024.4.7 continuity confirmed
Accessories: none
Speaker cable A standard cable that has become synonymous with 1.4 meter pairs of unprocessed speaker cables. It features a stranded wire structure that enables reliable transmission with low noise even in harsh environments such as studios. Monitor-like sound quality with little coloring (Kobayashi Hitoshi)
Maintenance information: 2024.4.7 continuity confirmed
Accessories: none
Speaker cable A standard cable that has become synonymous with 0.95m pair end unprocessed speaker cable. It features a stranded wire structure that enables reliable transmission with low noise even in harsh environments such as studios. Monitor-like sound quality with little coloring (Kobayashi Hitoshi)
Maintenance information: 2024.4.7 continuity confirmed
Accessories: none
Speaker cable A standard cable that has become synonymous with an unprocessed speaker cable with an 0.8 meter pair end. It features a stranded wire structure that enables reliable transmission with low noise even in harsh environments such as studios. Monitor-like sound quality with little coloring (Kobayashi Hitoshi)
Maintenance information: 2024.4.7 continuity confirmed
Accessories: none
Speaker cable A standard cable that has become synonymous with an unprocessed speaker cable with an 0.8 meter pair end. It features a stranded wire structure that enables reliable transmission with low noise even in harsh environments such as studios. Monitor-like sound quality with little coloring (Kobayashi Hitoshi)
Maintenance information: 2024.4.7 continuity confirmed
Accessories: none
Speaker cable is a standard cable that has become synonymous with an unprocessed speaker cable with only one 1.4 meter end. It features a stranded wire structure that enables reliable transmission with low noise even in harsh environments such as studios. Monitor-like sound quality with little coloring (Kobayashi Hitoshi)
Maintenance information: 2024.4.7 continuity confirmed
Accessories: none
Speaker cable A standard cable that has become synonymous with 1.3 m pair of unprocessed speaker cables. It features a stranded wire structure that enables reliable transmission with low noise even in harsh environments such as studios. Monitor-like sound quality with little coloring (Kobayashi Hitoshi)
Maintenance information: 2024.4.7 continuity confirmed
Accessories: none
Speaker cable A standard cable that has become synonymous with 1.3 m pair of unprocessed speaker cables. It features a stranded wire structure that enables reliable transmission with low noise even in harsh environments such as studios. Monitor-like sound quality with little coloring (Kobayashi Hitoshi)
Maintenance information: 2024.4.7 continuity confirmed
Accessories: none
※This is the successor model to the MK2, which uses a unique design that combines several untreated stranded wires at the 4.9m end to form a single wire with only 1 speaker cable. Another feature is that the cable is flexible and easy to handle. There is stickiness and dirt on the sheath due to aging (Tamai Jun)
Maintenance information: 2024.4.7 continuity confirmed
Accessories: none
The disposal price has been reduced. Member discounts are not applicable. 2023/5/5 sales price 9,800 yen. ※1 bottle only. A crossover network with exactly the same structure as the company's X8. This network is recommended when using BB4 with a T350 or 12TRXB. There is a feeling of use such as peeling and scratching on the label (Mizushima Itsuro)
Maintenance information: 2023.5.5 operation confirmed
Accessories: none
Main specifications: crossover frequency 3,500 Hz 8 ohms allowable input 100 W external dimensions W114 x H89 x D92 mm weight 680 g
Speaker cable A standard cable that has become synonymous with 1.0 m pair of unprocessed speaker cables. It features a stranded wire structure that enables reliable transmission with low noise even in harsh environments such as studios. Monitor-like sound quality with little coloring (Kobayashi Hitoshi)
Maintenance information: 2024.3.30 Continuity confirmed
Accessories: none