Sold per bottle, general purpose amplifier tube, top mark, JAN, made in America, measured value 38 (rejected value 28), with replacement box (the lid of the box is missing) *The measured values are values measured with the test machine TV-7 (Kojima Yosuke)
Accessories: replacement box
Sold 1 McIntosh Print Used for drive tubes of the company's MC275CE Made in China. Measured value 62 (rejection value 50) * Measurements are gm values measured on tv-7 tv-7 (Yosuke Kojima )
Accessories: None
Sold 1 McIntosh Print Used for drive tubes of the company's MC275CE Made in China (rejection value 50) * Measurements are gm values measured on tv-7 tv-7 (Yosuke Kojima )
Accessories: None
Scarce! Altec's variable frequency mono channel divider! Deteriorated parts, including 10 deteriorated capacitors, have been replaced! The frequency can be changed by opening the front panel, and it is compatible with crossovers from 80 Hz to a maximum of 10,000 Hz, so a very wide range of settings can be made. It features a clear tone typical of Altec, and is a must-see for multi-system users using the company's amplifiers. The input/output is a lug type only, so please make your own RCA cables, etc. (SASAKI Shota)
Maintenance information: 2024.4.18 Maintained (neon tube lamp replacement, each C and R check. Replace power filter C and coupling C. ICOPAMP pin broken replacement. Front switch cleaning operation check)
Accessories: none
Main specifications: 2-way channel divider compatible with 120V specification crossover frequencies 80 Hz, 150 Hz, 250 Hz, 500 Hz, 800 Hz, 1,000 Hz, 1,500 Hz, 2,500 Hz, 5,000 Hz, 8,000 Hz, 10,000 Hz, W485 x H45 x D185 mm 2.5 kg
Maintained! The 175 DLH horn is famous for its crisp, dry, and rich sound. While it has a sound that comes off quickly, it has a thick sound without being too hard, and it is a famous machine with a honeycomb lens that disperses sound. The exterior has scratches and a feeling of use over time. Serial 37086 36964 (Tomonori Asaine)
Maintenance information: 2024.4.9 maintained (magnetic circuit rust removal gap cleaning diaphragm adjustment screw replacement center adjustment terminal, 1 exterior cleaning horn, paint plate reapplied)
Accessories: No accessories
Main specifications: LE175/1 inch driver, 8 ohms, maximum sound pressure level, 108 dB, frequency characteristics, 800 Hz to 15 kHz, directivity 60 degrees (cone), allowable input, 30 W, W145 x H145 x D270 mm, 5.9 kg
Large triode sold per unit measured IP value: 50 mA (the best standard IP value for this amplifier is 50 mA) There is a getter burn with the original box ※ I checked the sound output and measured the plate current value with the test amplifier, and it was determined that the operation was good (Kojima Yosuke)
Accessories: original box
The disposal price has been reduced! (Member discounts are not applicable) 2023/12/1 sales price 298,000 yen Interior and exterior refreshment maintenance has been completed and brushed up! A consumer model of the 2S-305, a timeless monitor speaker masterpiece that Japan is proud of. The thick and clear midrange and detailed high frequencies, which cannot be felt with the look, vividly reproduce vocals. The sound that accurately expresses the characteristics of an amplifier that is set regardless of whether it is a vacuum tube or transistor makes me feel the goodness of the device I have on hand that I haven't been able to see until now. The exterior is in perfect condition due to maintenance. Serial 351364 4851370 (Yamato Yuki)
Maintenance information: 2023.12.1 Maintained (exterior polishing, oil finish, exterior repair, front and rear baffle painting to create missing parts, saran net replacement, velcro replacement. Woofer maintenance center adjustment, edge damping agent application, disconnection solder treatment, center cap dent correction. Tweeter maintenance center cap internal cleaning and replacement, center adjustment, corn paper edge crack repair, edge damping agent application, unit detachment. Network maintenance frequency characteristics check, ATT contact cleaning, terminal cleaning sound operation confirmed)
Accessories: saran net
Main specifications: 2 way bass reflex system input impedance 8 ohms output sound thickness level 96 dB crossover frequency 1500 Hz W650 × H880 × D445 mm weight 50 kg
Pair tube direct heat triode tube, white base, made in Russia, measured value 80/80 (rejected value 58) with original box ※ pair is determined based on gM values measured by testing machine TV-7 (Kojima Yosuke)
Accessories: original box
Maintained! A classic British Quad stereo power amplifier. Small in size yet full torque. The sound, which is as deep as a tube amp, exudes an appeal that won't fade. The exterior has a feeling of use over time, such as dullness and small scratches. Serial 51928 (Tomoho Asaine)
Maintenance information: 2024.3.22 maintained (internal all check, Tr, C, R co-operation check*INPUT modification available, AC code created for cable creation)
Accessories: Power cord, connection cord, copy of instruction manual
Main specifications: 45W+45W W120×H159×D324mm 8.2 kg
Maintained! A network with a crossover frequency of 7 kHz. It is ideal for MID/HIGH for 3-way systems using 2440. There is a small wound (Oikawa Tetsuji)
Maintenance information: 2024.4.17 Maintained (2 VR attenuators, 12 screws, 24 insulating washers replaced)
Accessories: none
Main specifications: crossover frequency 7 kHz, allowable input (continuous program), 50 W impedance, bass range: 12 to 16 ohms, treble range: 12 to 16 ohms, treble attenuation/variable volume, mounting hole W140 x 108 mm 0.7 kg
Maintained in October 2022! A network with a crossover frequency of 7 kHz. Ideal for MID/HIGH 3-WAY systems using the 2440. On the exterior, paint is bald and oxidized (Yonejima Satoshi)
Maintenance Information: 2022.10.7 Maintained (Terminal rust removal, acid cleaning, insulation bushing & mounting screw replacement. ATT replacement A frequency characteristic measurement check (~ approx. 42 kHz) was performed, and the original capacitor was continuously used for good results. Input/output waveform and balance check, sound output check.)
Accessories: no accessories
Main specifications: crossover frequency 7 kHz allowable input (continuous program) 50 W impedance bass range: 12 to 16 ohms treble range: 12 to 16 ohms treble attenuation/variable volume mounting hole W140 x 108 mm 0.7 kg
Maintained! A network with a crossover frequency of 7 kHz. Ideal for MID/HIGH 3-WAY systems using the 2440. On the exterior, there is a feeling of use, such as paint peeling off and scratches scattered around. Serial 17041 17049 (Hiroki Aso)
Maintenance information: 2023.3.31 Maintained (terminal rust removal, acid wash, insulating bushing & mounting screw replacement, ATT brand new replacement, frequency characteristic measurement check (~ approx. 42 kHz), continue using the original capacitor for good results, input/output waveform and balance confirmation sound output check)
Accessories: none
Main specifications: crossover frequency 7 kHz allowable input (continuous program) 50 W impedance bass range: 12 to 16 ohms treble range: 12 to 16 ohms treble attenuation/variable volume mounting hole W140 x 108 mm 0.7 kg
2023.12.18Maintained professional cross 800Hz network. It is used in the 4320, etc., and the low frequencies are pushed out smoothly, giving the impression that the clarity of the mid-high range has improved. This network is useful for creating 2-way systems where woofers have a certain amount of area. How about making a 2-way horn system with a 16Ω unit? There are stains and rust on the main body. (TERAMOTO Hidehiko)
Maintenance information: 2023.12.18 Maintained (terminal rust removal treatment, cleaning, mounting screw replacement. SW type ATT contact cleaning. Frequency characteristics are measured and checked, and the original capacitors are continuously used for good results. (Check the input/output waveform and balance, check the sound output)
Main specifications: crossover frequency 800 Hz impedance 12 to 16 ohms W122 x H154 x D132 mm 1.9 kg/1 unit
The disposal price has been reduced. Member prices are not applicable. 2024/1/18 sales price 118,000 yen Maintained! QUAD's first transistor preamp. The deep sound image and the impression that the natural atmosphere has definitely increased, and the glossy way it rides and the sound that goes through the core make you think it's a vacuum tube amplifier. Of course, it's a combination with the 303, and the sound doesn't feel out of place even when paired with a vacuum tube power amplifier. BAL knobs are worn out (Daiki Goto)
Maintenance information: 2024.1.18 Maintained (front push button contact failure → cleaning, PHONO/LINE in-board coupling capacitor replacement. AC spark killer capacitor broken → replaced, each VOL cleaned, power cable created)
Accessories: copy of instruction manual
Main specifications: external dimensions W550 x H110 x D220 mm, weight approx. 7.4 kg (actual measurement) [33] 3 input/line systems, 1 phono system (MM) [FM3] tubular FM dedicated tuner with automatic stereo/mono switching
The disposal price has been reduced. Member discounts are not applicable. 2024/1/18 sales price 118,000 yen Maintained! Quad first-generation transistor preamp. It's a car that makes more noise than its size, and you can enjoy a variety of expressions with expressive power rich in shadows. When combined with the company's 303, etc., it has a thick, dark tone and calm elegance. You can enjoy classical and acoustic sounds with glossy tones. There is a feeling of use such as small scratches. Serial 105591 (Takasaki Atsushi)
Maintenance information: 2024.1.17 maintained (internal internal board coupling C, bypass C, etc. replaced, front button contacts all cleaned, each VOL cleaned, DIN cable 3 created) 2014.12.1 maintained (capacitor replaced. Selector switch contact cleaning. (Input/output DIN terminal pin replacement)
Accessories: 5 PINDIN → RCA cable x 2, 4 PINDIN → RCA female x 1, power cable, copy of instruction manual
Main specifications: Phono 1 system, 3 line systems, W260 x H92 x D165 mm, 3 kg
The price has been drastically reduced. 2024/1/13 sale price 99,800 yen rare Gauss 46cm woofer! This is the first model to arrive at Hi-Fi. Unlike JBL woofers, it is characterized by sound tightness and strength of extrusion. It also seems interesting to use it as a 4345 woofer (Sasaki Shota)
Main specifications: Ferrite magnet 46cm woofer impedance 8Ω (measured DC resistance value 6.3Ω, 6.0Ω) 8.7kg (actual measurement)
Sold per bottle, 300B equivalent tube, direct heat triode, English tea base, double ring getter, measurement value 66 (rejection value 58) with original box*The measured values represent the gm values measured with the test machine TV-7 (Kojima Yosuke)
Accessories: original box
All units have been overhauled, including the woofer, mid, driver and tweeter, and network! It is an individual that has been fully restored, including the exterior. The original 4343 by All Alnico, the original 4343 of 4343! The crisp low frequencies and punchy high frequencies are unbearable, and popularity continues unabated even now. The dynamic sound typical of JBL has been revived due to maintenance. It is a famous monitor that can best reproduce the sound source of on-microphone recordings regardless of age or genre (Sasaki Shota)
Maintenance information: 2024.4.4 Maintained (exterior repair/gray paint. Front and rear baffle repair and painting. Saran net replacement/frame repair. Woofer maintenance: edge replacement, corn paper coating. Midmaintenance: edge replacement, corn paper coating. Driver maintenance: magnetic circuit rust removal/gap cleaning/center adjustment, sound absorbing material replacement, terminal cleaning/screw replacement. Tweeter maintenance: magnetic circuit rust removal/gap cleaning, terminal cleaning/screw replacement. Network maintenance: frequency characteristic check, ATT cleaning, terminal cleaning/screw replacement, switching SW contact cleaning, high frequency capacitor replacement)
Accessories: none
Main specifications: 4 way 4 speaker bass reflex type 2405/2420/2121/2231A crossover 300Hz/1250Hz/9500Hz 8Ω 93dB W635 x H1,051 x D435 mm 83.9 kg/book
It took plenty of time and money to finish everything from overhauling each unit to reupholstering the saran net to full exterior maintenance. This is a 4343BWX with blue baffles and walnut specifications. The instantaneous power, sharp treble, volume and dynamism of the bass are outstanding. It's one step ahead of current speakers in terms of localization, but it's rare to find a speaker that makes on-mic recordings of all ages sound better than this. Serial 16119, 16349 (Fujisawa Yukishi)
Maintenance information: 2024.4.5 maintained (exterior repair/polishing/oil finish, front and rear baffle repair/painting, saran net reupholstery, frame repair, woofer maintenance: edge replacement, cone paper coating, midmaintenance: driver maintenance: magnetic circuit rust removal/in-gap cleaning/center adjustment, sound absorbing material replacement, terminal cleaning/screw replacement, tweeter maintenance: magnetic circuit rust removal/in-gap cleaning, terminal Cleaning screw replacement, network maintenance: frequency characteristic check, ATT disassembly cleaning, switching SW contact cleaning, terminal cleaning/screw replacement, unit detachable diffuser repair)
Accessories: saran net, diffuser
Main specifications: 4-way monitor speaker bass reflex playback frequency band 35 Hz to 20 kHz (+- 3 dB) crossover frequency 300 Hz/1250 Hz/9500 Hz impedance 8 Ω output sound pressure level 93 dB dimensions W635 x H1,051 x D435 mm weight 83.9 kg/book
1 sold bi-triode power tube made in the USA JAN measurement value 58 (rejection value 40) with original box ※ Measured value is gm value measured by tv-7 tester (Yosuke Kojima)
Accessories: original box
Pair Tube Bi-triode Power Tube Made in USA JAN Measurement Value 60/60 (Rejection Value 40) With Original Box ※ The pair is judged based on GM value measured on the tv-7 test machine (Yosuke Kojima)
Accessories: original box
Pair Tube Bi-triode Power Tube Made in USA JAN Measurement Value 60/60 (Rejection Value 40) With Original Box ※ The pair is judged based on GM value measured on the tv-7 test machine (Yosuke Kojima)
Accessories: original box
Pair Tube Bi-triode Power Tube Made in USA JAN Measurement Value 60/60 (Rejection Value 40) With Original Box ※ The pair is judged based on GM value measured on the tv-7 test machine (Yosuke Kojima)
Accessories: original box
Pair tube triode metal base, made in America, original with box ※ The pair was determined based on the EM value measured by the SENCORE TC-162 tester (Kojima Yosuke)
Accessories: original box
Pair tube, triode, metal base, made in America, with original box*Pairs are determined based on EM values measured by the SENCORE TC-162 testing machine (Kojima Yosuke)
Accessories: original box
Pair tube, metal, brown base, made in America, measured value 66/64 (rejected value 44) with original box (some written), sticker is attached to the base part, and there is a getter burn ※ The pair was determined based on the GM value measured with the test machine TV-7 (Kojima Yosuke)
Accessories: original box
Pair tube KT88 compatible ball American metal base measurement value 58/52 (rejection value 44) There is getter burn and loss on one side, and there is dullness on the base on the other side ※The pair is judged based on the gM value measured by the testing machine TV-7 (Kojima Yosuke)
Accessories: none
1 bottle of KT88 compatible ball, made in America, metal base, LUXMAN print measurement value 54 (rejection value 44), base with replacement box, has dullness ※ measured values indicate GM values measured with test machine TV-7 (Kojima Yosuke)
Accessories: replacement box
Pair tube KT88 compatible ball American metal base measurement value 68/62 (rejected value 44) *Pairs are determined based on gM values measured with the test machine TV-7 (Kojima Yosuke)
Accessories: none
Pair tube, KT88 compatible ball, American metal base, measured value 66/64 (rejected value 44) with original box ※Pairs are determined based on gM values measured with the test machine TV-7 (Kojima Yosuke)
Accessories: original box
Pair tube KT88 compatible sphere Russian metal brown base measurement value 50/50 (rejection theory 44) there is writing on the base with the blue box ※The pair is determined based on the GM value measured with the test machine TV-7 (Kojima Yosuke)
Accessories: blue box
Pair tube direct heat triode tube, made in America, JAN measured value 74/74 (rejected value 38) with white box ※Pairs are determined based on gM values measured by the testing machine TV-7 (Kojima Yosuke)
Accessories: white box
Pair tube, EL84 compatible ball, pentode tube, made in Japan, measured value 84/80 (rejection value 50), both tubes have pin bends ※ pairs are determined based on GM values measured with test machine TV-7 (Kojima Yosuke)
Accessories: none
※Set of 2 (both tubes are not treated as a pair since their structures are very different), deflection output tubes, made in America, measured value 66/64 (rejection value 38), with original box (box lid is missing) *Measured values indicate GM values measured with the TV-7 testing machine (Kojima Yosuke)
Accessories: original box
Pair tube, EL34 compatible ball, Russian tube, measured value 44/42 (rejected value 30) with original box ※ pair is determined based on GM values measured with test machine TV-7 (Kojima Yosuke)
Accessories: original box
Pair tube triode for Hi-Fi made in Japan*Pairs are determined based on EM values measured with the test machine EM-604 (Yosuke Kojima)
Accessories: none
Pair tube, large beam output tube, 8147 compatible bulb, gray plate for Hi-Fi, with original box (outer box/inner box), has slightly decreased getter for both tubes ※ The pair measures and determines EM values with the measuring machine TC-162 (Kojima Yosuke)
Accessories: original box
Pair tube, deflection output tube, made in America, with original box ※Pairs are determined based on EM values measured with the TC-162 tester (Kojima Yosuke)
Accessories: original box
1 bottle of side-heat beam tube, made in France, smoke measurement value 42 (rejection value 25), replacement box included, printing is missing ※ the measured value shows the GM value measured with the test machine TV-7 (Kojima Yosuke)
Accessories: replacement box