Maintained by the manufacturer! A famous machine loaded with excellent phono amplifiers. This is a good quality control amplifier that allows you to hear clean, transparent sound. There are only top quality models, and the thickness and luster of the sound will not fade even after nearly 30 years have passed. There are no noticeable scratches and it is in good condition (Sasaki Shota)
Maintenance information: 2024.3.23 Maintained by the manufacturer (replaced due to poor capacitor characteristics in each circuit. Replace each lamp due to stress deterioration. Safety checks, pressure resistance tests, operation, and characteristic checks are OK. (Each readjustment and cleaning)
Accessories: manual
Main specifications: input terminal/RCA5 system, XLR2 system, tape input/output terminal 2 system, PHONO input 2 system pre-out/RCA2 system, XLR2 system W468 x H171 x D415 mm 25.1 kg
The disposal price has been reduced! (Member prices are not applicable) 2024/3/15 sales price 248,000 yen The successor model S2 to the hit CM9 is now in stock in piano black. The three-dimensional sound field and transparent tone are of advanced witty quality. It is a versatile machine that also has a tight low frequency. There are abrasions and line marks on the exterior. Serial 0016485, 0016486 (Fujisawa Yukishi)
Maintenance information: 2024.3.15 Operation confirmed
Accessories: rubber feet, jumper plate*spikes missing
Main specifications: 3-way speaker, 8 ohms, playback frequency band, 30 Hz to 50 kHz, output sound pressure level, 89db, W320 x H1025 x D370 mm, 26.6 kg
Maintained! The A-2000 is equipped with Yamaha's unique RICHNESS circuit. Settings can be made by switching between speakers, such as the company's NS-2000 or 1000M. The low frequencies with a rich sense of scale and the transparent sound typical of Yamaha are attractive, and the extravagant structure typical of the bubble period is directly linked to the sound. There are many scratches on the exterior, corrosion on the switch, and overall there is dullness (Oikawa Tetsuji)
Maintenance information: 2024.3.20 Maintained (Speaker terminals are processed and attached to something that can be obtained. CD input pin jack replacement. Other pin-jack dents etc. were disassembled and reworked. Disassemble the switch and volume contacts, polish them and apply contact cleaner. (Corrected soldering on all boards including the main amplifier board, equalizer board, etc.)
Accessories: instruction manual
Main specifications: 130W+130W (8Ω) richness circuit frequency characteristics 5Hz to 100kHz W473 x H169 x D464 mm 26 kg
Output transparent pair for push-pull output 40W primary: 10 kΩ secondary: 4-8-16 ohms Usage: VT-62, VT-25, 6F6, 6V6, etc. W83 x H105 x D78 mm approx. 2.3 kg/piece (actual measurement, not including protrusions) with original box with scuffs and tape marks in places (Kojima Yosuke)
Accessories: original box
The disposal price has been reduced! (Member discounts are not applicable) 2024/2/16 sales price 69,800 yen Equipped with a unit using wood fiber cone paper. The polished front baffle is beautiful and stylish, and the rounded edges not only look great, but also reduce distortion during playback. The tone is detailed and transparent like DALI, and you can feel the expanse of space, and it goes particularly well with classical music. The exterior is generally good, although there are some small scratches. Serial 587681 (Jun Tamai)
Maintenance information: 2024.2.16 sound output confirmed
Accessories: instruction manual, 8 saran net spikes
Main specifications: Unit configuration/mid and low range 180 mm cone x 2 treble range 25 mm soft dome frequency characteristics 40 Hz to 26.5 kHz crossover 2.4 kHz 90 dB 6 Ω recommended amplifier output 40 to 150 W W257 x H994 x D320 mm (including base) 14.9 kg/book
Comes with original box! MC cartridge using a solid boron cantilever and a special line contact needle. It is a cartridge with high resolution and a transparent tone, and you can feel the high level of power. The cantilever turns slightly to the left (Hiura Katsuji)
Maintenance information: 2024.3.24 sound output confirmed
Accessories: instruction manual, original box, needle cover
Main specifications: MC type playback frequency band 15 to 50000 Hz output voltage 0.4 mV channel separation 30 dB output balance 0.5 dB needle pressure 1.8 to 2.2 g (2.0 g standard) coil impedance 12 Ω DC resistance 12 Ω load resistance 100 Ω or more (when connected to a head amplifier) line contact needle 8 g
The price has been drastically reduced. 2024/2/15 sales price 59,800 yen ※The exterior is in poor condition, so it's cheap. Equipped with a unit that uses wood fiber cone paper. The polished front baffle and rounded edges not only look great, but also reduce distortion during playback. The tone is detailed and transparent like DALI, and you can feel the expanse of space, and it goes particularly well with classical music. You can see the exterior, leg oxidation, rust, scratches on the top plate, torn corners on the saran net, etc. (Takasaki Atsushi)
Maintenance information: 2024.2.11 Operation confirmed
Accessories: saran net
Main specifications: Unit configuration/mid and low range 180 mm cones x 2, treble range 25 mm soft dome frequency characteristics 40 Hz to 26.5 kHz crossover 2.4 kHz 90 dB 6 Ω recommended amplifier output 40 to 150 W W257 x H994 x D320 mm (including base) 14.9 kg/book
Output transparent pair for push-pull output 40W primary: 8kΩ secondary: 4-8-16 ohms W83 x H104 x D78 mm 2.3 kg/piece with original box (no label on one side) There are scuffs and line scratches in places (Kojima Yosuke)
Accessories: original box
Input transparent sale primary: 10 KΩ secondary: 60 kΩ boost ratio 1:2.5 W 24 x H35 mm 60 g/piece (actual measurement, not including protrusions) with white box (Kojima Yosuke)
Accessories: white box
Output transparent sale push pull output 35W primary: 8kΩ secondary: 4-8-16Ω usage: 7189 app, etc. W82 x H72 x D82 mm approx. 1.6 kg/piece (actual measurement, not including protrusions) The plate is often scratched, printing is erased a lot, and there are paint floats due to rust in places (Kojima Yosuke)
Accessories: none
A ham eraser that can input 1000 VA with 2 inputs. It is mainly effective with front-end devices such as CD players and amplifiers. Delicate and highly transparent sound quality can be obtained due to improved SNR, and clear, high-definition images can be obtained in video systems. PSE standard product There is dirt on the exterior (Tamura Eiji)
Maintenance information: 2024.3.26 Operation confirmed
Accessories: No accessories
Main specifications: 2 input outlets W130 x H94 x D267 mm (without protrusions) approx. 2.0 kg
The price has been reduced! 2024/3/16 sales price 600 yen*1 Y lugs are out of stock at 1 location, so it's cheap. This model enhances visibility on the hot and cold sides by using a 1.0 m pair end Y lug - an untreated transparent jacket and applying tin plating to the conductors on one side of the speaker cable. This cable is perfect for professional use. The exterior has a feeling of use such as dullness and dirt on the sheath (Jun Tamai)
Maintenance information: 2024.3.11 continuity confirmed
Accessories: none
The price has been reduced. 2024/3/11 sales price 600 yen Speaker cable This model enhances visibility on the hot and cold sides by using an untreated transparent jacket at the end of a 1.1 m pair and applying tin plating to the conductors on one side. This cable is perfect for professional use. The exterior has a feeling of use such as dullness and dirt on the sheath (Jun Tamai)
Maintenance information: 2024.3.11 continuity confirmed
Accessories: none
The 0.7 m speaker cable is an unprocessed, parallel type that is easy to use, and the conductor is a basic type of high-purity OFC cable made by twisting 196 0.1 mm diameter wires. The sheath uses uncolored transparent PVC with an emphasis on sound quality. Clear sound quality expands applications. I have kusumi (Asahina Satoshi method)
Maintenance information: 2023.9.8 Conductivity confirmed
Accessories: none