※There is no label, and it is painted black, so it is inexpensive. Attach a 2 inch driver such as a large professional radial horn 2440 and enjoy the thick, exciting sound. The strong sound pressure that comes straight out is impressive. It is also recommended as an introduction to large horns (Fujisawa Yukishi)
Accessories: none
Main specifications: crossover frequency 500 Hz horizontal 90 degrees vertical 40 degrees W800 × H615 × D 215 mm 13.8 kg/book 11.3 kg
Maintained! A model that specializes in 3009S2 light needle pressure and has narrowed down applications. The sharp, well-sharpened followability is attractive. You can enjoy the sharp cuts and the amount of information typical of an analog disc. The stoic and beautiful design, which looks like a precision machine, is also excellent (Fujisawa Yukishi)
Maintenance information: 2023.10.25 Maintained (bed plate grommets x 4 were replaced due to deterioration. The main unit was disassembled, checked, and cleaned. The inspection operation of each part was checked. (*Bed plate grommets are compatible as replacements)
Accessories: phono cable
Main specifications: static balance type needle pressure 0 to 1.5 g, cartridge body weight 4 to 9 g
This model is specialized for 3009S2 light needle pressure and has narrowed down applications. The sharpened, sharp followability is attractive. You can enjoy the sharp cuts and the large amount of information typical of an analog disc. The stoic and beautiful design, similar to a precision machine, is also excellent. Serial 182902 (Fujisawa Yukishi)
Maintenance information: 2024.3.1 continuity confirmed
Accessories: phono cable
Main specifications: static balance type needle pressure 0 to 1.5 g cartridge dead weight 4 to 9 g
An enclosure that seems to be for Sansui's old system component speakers. The lattice box with legs reminiscent of JBL's Baron and Bicount is really fashionable. The lattice on both the left and right is out of the frame. There are traces of internal remodeling (Fujisawa Koshi)
Accessories: None
Main specifications: opening diameter 212mm (screw pitch 240mm), aperture diameter 110mm (countertop 170mm, screw pitch 140mm), opening diameter 95mm (for bass reflex port/wood screw pitch 118mm), aperture diameter 70mm (Countertop 92mm, Screw Pitch 104mm) 14mm Particle Board, Veneer Finish W500 × H665 × D430mm 15kg
Speaker cable, 0.6 m pair, terminal, unprocessed, stress-free, 6N copper conductor, high resolution, and smooth, natural listening comfort is comparable even when put into a high-end system (Fujisawa Yukishi)
Accessories: none
Speaker cable, 0.6 m pair, terminal, unprocessed, stress-free, 6N copper conductor, high resolution, and smooth, natural listening comfort is comparable even when put into a high-end system (Fujisawa Yukishi)
Accessories: none
The stylus is good, but since the cantilever is curved, it is inexpensive. A mono-only cartridge with a traditional 33 series body. Play mono records clearly with a pick-up that is only horizontally oriented. It has vertical compliance and is optimized for recurrent mono editions in the stereoca era. The range is wider than Denon's DL-102 and you can feel the expansion (Fujisawa Yukishi)
Maintenance information: 2023.8.29 Operation confirmed
Accessories: needle cover
Main specifications: MC type needle pressure 2.3 to 2.7 g (2.5 g standard) Muku round needle high hardness duralumin cantilever PCOCC coil anti-vibration rubber “honeynight” impedance 10 ohms 6.9 g
Uses a damping aluminum ring and a large diameter driver. Open-type full-scale headphones with a wider sound field. There is no habit, and it is a great car even for beginners. (FUJISAWA KOSHI)
Maintenance information: 2024.2.25 Sound output operation confirmed
Accessories: instruction manual, original box
Main specifications: open air dynamic type, φ53mm, output sound pressure level, 96 dB, playback frequency band, 15 to 27,000 Hz, maximum input, 700 mW, impedance: 35 ohms, mass: 275 g
※There is no problem with operation, but since it is cheap, it will be handed over as is. A compact and lightweight phono equalizer. Please use it with a Miji component or a pre-main amplifier that does not have a phono input. Perfect as an introductory machine (Fujisawa Yukishi)
Maintenance information: 2024.2.18 Operation confirmed
Accessories: AC adapter
Main specifications: MM dedicated phono equalizer W70 x H30 x D92 mm 160 g
The introductory model of the current model 2022 Marantz CD player is equipped with a 32-bit stereo D/A converter equipped with a digital filter switching function, and you can switch between filter 1 (slow roll off) and filter 2 (sharp roll off) according to the music to be played and your preferences. There are no particularly noticeable scratches on the exterior. Serial MBDJ112274378 (Fujisawa Yukishi)
Maintenance information: 2024.2.24 Operation confirmed
Accessories: remote control, instruction manual, power cord, connection cord
Main specifications: audio output terminal/analog unbalance x 1, coaxial digital x 1, headphone x 1, other input/output terminals, USB (front) x 1, Marantz remote bus (RC-5) input/output x 1, W440 x H105 x D341 mm 6.5 kg
The price has been reduced! 2024/3/20 sales price 59,800 yen has been maintained! This is a Sansui CD player with impressive audible sound that is both sound and resolution. The D/A conversion unit is equipped with NEWL.D.C.S, a 1-bit D/A conversion system based on crystal oscillation. The board with the side panel is broken, and there are other small scratches and a feeling of use. Serial 609080871 (Fujisawa Yukishi)
Maintenance information: 2024.3.20 Maintained (repair of the mechanical part of the traverse mechanism Assy. Create connection cable connectors. (Replace all front panel operation switches)
Accessories: No accessories
Main specifications: frequency characteristics DC to 20 kHz SNR 105 dB or more W466 x H127 x D397 mm 11 kg
The disposal price has been reduced! (Member prices do not apply) 2024/1/29 sales price 79,800 yen Maintained in 2023! A tube control amplifier using a CR non-feedback type equalizer section by PROFACT in Hokkaido. You can enjoy straight, realistic sound with a simple circuit configuration that omits tone control. There is a thick line scratch on the bottom of the front panel (Fujisawa Yukishi)
Maintenance information: 2023.4.13 maintenance (selector switch, TAPE monitor switch, disassembly contact polishing grease application. Volume check. (Check the operation of each input/output)
Accessories: power cord
Main specifications: use vacuum tube E88CC x 3 input PHONO2 system, LINE 2 system W480 x H105 x D300 mm 8.0 kg
The disposal price has been reduced! (Member prices are not applicable) 2024/3/15 sales price 248,000 yen The successor model S2 to the hit CM9 is now in stock in piano black. The three-dimensional sound field and transparent tone are of advanced witty quality. It is a versatile machine that also has a tight low frequency. There are abrasions and line marks on the exterior. Serial 0016485, 0016486 (Fujisawa Yukishi)
Maintenance information: 2024.3.15 Operation confirmed
Accessories: rubber feet, jumper plate*spikes missing
Main specifications: 3-way speaker, 8 ohms, playback frequency band, 30 Hz to 50 kHz, output sound pressure level, 89db, W320 x H1025 x D370 mm, 26.6 kg
A new dust cover has been created and maintained! A record player with high cost performance by inheriting technology obtained with the GT-2000. It conveys all the goodness of analog discs where power and subtlety coexist and you can enjoy rich overtones. There are scratches and bumps on the exterior. Serial 01638 (Fujisawa Yukishi)
Maintenance information: 2024.2.16 Maintained (new dust cover created. Motor bearing grease up, O-ring replacement. Arm lifter grease up. Arm disassembly cleaning and pivot adjustment. Electrolytic capacitor replacement. Check turntable rotation speed and check arm needle pressure. Check the sound output. (Simple exterior cleaning, comprehensive operation confirmation inspection)
Accessories: instruction manual, EP adapter
Main specifications: Statically balanced S-shaped arm mounted applicable cartridge 3G to 12g direct drive drive quartz PLL servo control DC coreless hole motor turntable 36 cm aluminum die cast W532 x H220 x D388 mm 22 kg
The price has been reduced! 2024/3/11 sales price 35,000 yen A headphone amplifier with a piano black finish. The volume is smooth and moderately heavy, and it is a headphone amplifier with a simple, uncomplicated, natural, and comfortable neutral sound. The exterior is good with no conspicuous scratches. Serial AA004140 (Fujisawa Yukishi)
Maintenance information: 2024.3.11 Operation confirmed
Accessories: instruction manual, power cord
Main specifications: 3 Hz to 300 kHz 8 ohm to 10 kΩ 106 dB W160 × H58 × D283 mm 2.2 kg
The price has been drastically reduced! 2024/3/24 sales price 998,000 yen*Upgraded product from KLIMAX DS. A DS/3 model equipped with KATALYST and finally compatible with DSD. A reference model for Lin's network player. This time, a significant upgrade has been achieved by reviewing not only the chip but also the audio circuit. There are some scratches on the exterior. Serial 1322666 (Fujisawa Yukishi)
Maintenance information: 2024.3.24 Operation confirmed (Software: 4.104.518)
Accessories: remote control, power cord
Main specifications: maximum compatible sampling frequency 382 kHz/24 bit DSD11.Line output: XLR balance x 1, RCA unbalance x 1 W350 ✕ H60 ✕ D344 mm weight 10.0 kg
The disposal price has been reduced! Member prices are not applicable. 2024/3/24 sales price 298,000 yen This model was created through an upgrade service performed for users of the first KLIMAX DS. It is packed in a compact housing, and operation buttons, display, remote control, etc. are omitted, but you can enjoy “KLIMAX” quality sound quality, which sets it apart from AKURATE. There are some scratches on the exterior. Serial 1385848 (Fujisawa Yukishi)
Maintenance information: 2024.3.24 Operation confirmed (Software: 4.104.518)
Accessories: power cord
Main specifications: Compatible file formats FLAC/WAV/MP3/AIFF compatible sampling frequency 44.1k/48k/88.2k/96k/176.4k/192 kHz compatible bits 16 to 24 bits output RCA1 system/XLR1 system size approx. W322 x D265 x H50 mm weight approx. 2 kg
The disposal price has been reduced! Member prices are not applicable. 2024/3/13 sales price 59,800 yen Maintained! Kenwood's last varicon-type analog tuner developed by utilizing the L-02T's know-how. The rich, vivid sound quality in the mid-range typical of the L series is attractive. There are some scratches on the exterior. Serial 44K10290 (Fujisawa Yukishi)
Maintenance information: 2024.3.13 maintained (replaced with a trimmer with an approximate value due to faulty front-end OSC trimmer and unavailability of the original. Therefore, tracking was adjusted with a trimmer, but it fits perfectly with the memory around 83 MHz, but the memory deviates slightly at higher or lower frequencies. (Please be aware in advance)
Accessories: copy of instruction manual
Main specifications: Non-spectrum IF method, reception frequency 76MHz to 90MHz, antenna impedance 75Ω (unbalance), multipath output, W440 x H111 x D337 mm, 5.4 kg
※Since it is for business use, it will be handed over as is. This unit has 4 built-in circuits for converting unbalanced output to balanced output, and 4 circuits for converting balanced input to unbalanced input. In addition, it also functions as an audio distributor that can separate one unbalanced input into multiple balanced outputs using an INPUT LINK switch equipped between each channel. Serial 790070 (Fujisawa Yukishi)
Maintenance information: 2024.3.28 Operation confirmed
Accessories: No accessories
Main specifications: UNBALANCED TO BALANCED input RCA pin jack ✕ 4 output XLR type connector ✕ 4 BALANCED TO UNBALANCED input XLR type connector ✕ 4 output RCA pin jack ✕ 4 size W482 ✕ H48 ✕ D196mm weight 2.8 kg
Everything from unit and network overhauls to exterior maintenance has been completely refreshed! This is a Lancaster equipped with a 12 inch monitor GOLD. The small feel of the high-efficiency 12-inch unit and the hole tone that sounds throughout the box are unique to this model. It sounds one size smaller than RECTANGLAR, and is compatible with tube amplifiers. There are some repair marks left, but the finish is beautiful. (FUJISAWA KOSHI)
Maintenance information: 2024.3.28 maintained (exterior repair/polishing/clear finish, rear baffle repair/painting, saran net cleaning/repasting, sound-absorbing material detachable, unit maintenance: magnetic circuit gap cleaning/center adjustment for both low and high frequencies, network maintenance: frequency characteristic check, ATT cleaning, terminal mounting processing)
Accessories: No accessories
Main specifications: 2 way, 1 speaker, bass reflex system, floor type, 12inch coaxial 2-way (MONITOR GOLD) frequency band 25 to 20,000 Hz minimum resonance frequency 20 Hz maximum input 30 W output sound pressure level 90.5 dB 8 Ω W535 × H840 × D320 mm 28.45 kg
*The diaphragm has been replaced with a genuine JBL D8R2425. Maintained! Representative of JBL's 1-inch driver units. The playback band is wide, so you can enjoy changing the network cross freely. The toughness, sound pressure, and full-bodied mid-high range sound are appealing, which is unbelievable for some input. Scratches and paint peeling can be seen. Serial 62206, 62240 (Fujisawa Yukishi)
Maintenance information: 2024.3.4 maintained (diaphragm installation adjustment (diaphragm comes with D8R2425) genuine JBL product. (The pad dampener has been replaced.)
Accessories: No accessories
Main specifications: 1 inch driver, 500 to 20,000 Hz, 8 ohms, W145 x D97 mm, 5.1 kg/bottle
※Since it is cheap, it will be handed over as is. Marantz 10cm full range speaker. There is no habit, and it makes a well-balanced sound from high to low frequencies. It doesn't take up much space, so you can set it up anywhere. The exterior has scratches, dirt, scratches, etc. Also, there is color peeling and partial deformation on saran. Serial MZ01748010115 (Fujisawa Yukishi)
Maintenance information: 2024.2.25 Operation confirmed
Accessories: saran net
Main specifications: 1 way, 1 speaker, bass reflex system, setting free type, rated input 35W, impedance 6Ω, playback frequency 50 Hz to 20 kHz, W230 x H150 x D150 mm
Good condition with original box! OTG cable compatible with portable devices equipped with Lightning terminals. Can be used with products equipped with USB Type-C. By using a mesh sheath that is resistant to compression and twisting, and aluminum alloy is used for the plug, faster and more stable transmission is achieved. (FUJISAWA KOSHI)
Maintenance information: 2024.2.6 continuity confirmed
Accessories: original box
Main specifications: Lightning-USB TypeC total length 138mm cable length 80mm (excluding plug)
The price has been reduced! 2024/2/23 sales price 39,800 yen This is an 8 ohm specification Japanese 1 inch driver developed for professional use. A must-see for anyone who owns the company's AH-501 horn. It makes a penetrating treble and deep mid-range sound unique to CORAL. It is also recommended for those who make their own speakers. There is paint peeling on the exterior. Serial 1304, 1325 (Fujisawa Yukishi)
Maintenance information: 2024.2.23 Operation confirmed
Accessories: No accessories
Main specifications: throat diameter 25.4 mm (1 inch) sound pressure 104 dB impedance 8 ohms playback frequency 500 Hz-18 kHz magnetic flux density 18000 gauss maximum input 100 W diameter 120 x H74 mm 3.3 kg/piece
Maintained by Electri, including replacing the windshield panel with a new one! A pre-main amplifier with a built-in McIntosh traditional output transformer. You can enjoy the rich and rich sound world typical of Macintosh. This is one that combines the sound appeal of modern and old McKinn. The sense of power that makes you feel the strength is similar to that of a separate amplifier. The exterior is dull. Serial JLF1440 (Fujisawa Yukishi)
Maintenance information: 2024.3.28 manufacturer maintained (windshield panel replacement. Replace the Oring to fix the switch bezel. Due to a problem with the operational amplifier, characteristics were poor, and the voltage was unstable, so a lot of pop noise was generated when the front volume display was off. IC exchange. Capacitors were replaced at various other locations. Replaced due to filter capacitor deterioration. Other relays, transistors, etc. have been replaced just in case, but please be aware that the pop noise of this unit is difficult to completely remove due to product specifications, so it can be heard slightly depending on when the power is turned on. Replace all front lamps. Lamp fixing grommet replacement. There is a difference in meter runout when the volume is low, but when the output is raised about 3/4, the difference is not very noticeable. Due to specifications due to individual differences in parts, improvements are difficult, so adjustments have been made so that they fit at a position of approximately half a meter. Same confirmation and other inspections.)
Accessories: remote control, instruction manual
Main specifications: 150W+150W (8/4/2Ω) phono input MM dimensions W445 x H179 x D508 mm weight 30 kg
The price has been drastically reduced! 2024/3/9 sales price 250,000 yen Maintained! AC100V specification MC2205 unmetered type. The intensity, driving power, and sense of attack are astonishing, just like the McKinn Sound in its heyday. It is the sound that jazz fans of yesteryear were looking for, and the sound combined with speakers such as the 4343 is exceptional. The exterior has rust spots, dullness, and line scratches. Serial AU3974 (Fujisawa Yukishi)
Maintenance Information: 2024.3.9 Maintained (AC100V specification. Each replacement solder was corrected due to output relays, electrolytic capacitors, and lamp defects and deterioration. Card edge contact cleaning volume and switch cleaning. (Bias and offset check output voice check OK.)
Accessories: none
Main specifications: output 200W+200W, 400W (mono) W407 x H177 x D372 mm 38.6 kg
The price has been drastically reduced. 2024/3/15 sales price 398,000 yen Maintained! It is a vacuum tube amplifier that is the younger brother of the Meiki MC275. The moderate stickiness and rich sound are good hues unique to vintage McKinn. It is less rough than the MC275, and you can feel the high level of relaxed musicality. The exterior has oxidation and rust, and there are dents and scratches on the transformer (Fujisawa Yukishi)
Maintenance information: 2024.3.15 Maintained (choke transformer rewound repair. Vacuum tube 12BH7 deterioration replacement. Block capacitor 35/80/15 μF defective replacement. 150 μF block capacitors made in Japan → replace 2 with CE ones. Replace 4 0.047 μF film capacitors for defects and deterioration. Replace 3 100 μF electrolytic capacitors and other deterioration. 2 1W resistors and 1/2W deterioration replacements Vacuum tube socket and RCA jack caulk repair. *There is a part of the SP terminal missing. (AC cord has been replaced with Hitachi by another company)
Accessories: No accessories
Main specifications: 25W+25W vacuum tube 7591 (output tube), 12BH7, 12AU7, 12AX7 W232 x H178 x D368 mm 15.4 kg
German MM/MC compatible phono equalizer. The speed of sound is outstanding. The sound quality is straight without turbidity, and the volume and power of the bass are excellent, and the rhythm band can be heard richly. It's an excellent product that also allows you to get good MC gain. There is an MM/MC changeover switch on the bottom, making it very easy to use. ※There is a note on the original box. The exterior is dull. Serial 00781 (Fujisawa Yukishi)
Maintenance information: 2024.3.25 Operation confirmed
Accessories: original box
Main Specifications: 60dB (MC) 40dB (MM) Input Impedance: 800Ω/MC, 47kΩ/mm W50 ✕ H30 ✕ D74mm 0.2 kg
The disposal price has been reduced. Member prices are not applicable. 2023/12/10 sales price 25,000 yen*Since the output terminal has been remodeled to an XLR terminal, it is inexpensive. It is a pretty niche product that uses 2 stereo amplifiers so that it can be used like a mono amplifier. Actually, it seems to be a product intended for use with the company's 405-2. There is a lot of dullness on the exterior due to aging (Fujisawa Yukishi)
Maintenance information: 2023.6.4 sound output confirmed
Accessories: none
Main specifications: W80xH47xD140mm approx. 1.0 kg/unit
A passive controller with minimal functionality packed tightly and compactly. You can level, mute, and monossum stereo sources. Serial S211100256C9RGU (Fujisawa Yukishi)
Maintenance information: 2024.3.28 Operation confirmed
Accessories: instruction manual, original box
Main specifications: input XLR/standard phone jack complex 1 system, mini phone jack 1 system output XLR/standard phone jack complex 1 system, 1 mini phone jack system W145 x H69 x D85 mm 0.4 kg
The disposal price has been reduced! (Member prices are not applicable) 2024/3/19 sales price 1,080,000 yen Hi-Fi Hall first arrival! DELA's current flagship music server, completely redesigned. It uses a larger capacity transformer than the company's N10, is equipped with a custom-designed high-capacity SSD (3.8TB), and has plenty of interfaces, such as a 10MHz external clock input and SFP port. There are no noticeable scratches and it is in good condition. Serial 40315631100042 (Fujisawa Yukishi)
Maintenance information: 2024.3.19 Operation confirmed (software 1.03)
Accessories: setup guide, power cord, connection cord, gloves, original box
Main Specifications: SSD 3.8TB W440 x H x 82 x D353 mm Weight 14 kg Input/Output: USB 3.0 front x 1, USB 2.0 rear x 1 x 1 Gigabit Ethernet compatible LAN port x 2 SFP port (exclusive use with “LAN” port) 10 MHz external clock input x 1
*The lower front panel has been changed to a PRA-1003 panel. Maintained! A stereo power amplifier using a DC amplifier system. The power supply unit is equipped with 2 independent power transformers on the left and right sides. The powerful and clear sound emanating from the sturdy body is impressive! The well-designed analog meters are beautiful. You can enjoy all genres with very good extrusion and a sound that is not addictive. There are stains and small scratches throughout the exterior. Serial 110456 (Fujisawa Yukishi)
Maintenance information: 2024.3.7 Maintained (LR output meter relay replacement, LR power amplifier solder repair, differential circuit part FET, transistor replacement, pin jack replacement, interior and exterior inspection cleaning*Since the ceiling panel cannot be obtained from this unit, it remains the same)
Accessories: none
Main specifications: rated output 100W+100W (4Ω) 85W+85W (8Ω) transmission frequency characteristics DC to 100kHz W410 × H200 × D285 mm 17 kg
The price has been drastically reduced! 2024/3/8 sales price 99,800 yen Maintained! AC120V specification. The low frequency response is good, there is plenty of room above the housing, and I definitely want to listen closely to the mid to high frequencies. It is a power amplifier with an output stage configured using the TL (transconductance linearization) circuit system, which is patented by the company using MOS-FET. BTL connection is possible, and it can be used as a 400W monaural amplifier. The exterior has bumps, scratches, etc. Serial 3200716 (Fujisawa Yukishi)
Maintenance information: 2024.3.8 Maintained (all internal checks. C, R, TR, FET, etc. are OK. Operation test)
Accessories: power cable
Main Specifications: 120W+120W (8Ω) 200W+200W (4Ω) Input Impedance: 47kΩ Damping Factor: 500 W480 x H140 x D300 mm 14.0 kg
Maintained! A control amplifier with a thorough review of the equalizer amplifier, which is important for record playback. It's perfect for those who want to make analog sounds moist. The retro look is also GOOD. The exterior has a feeling of use such as dullness and small scratches. Serial 111076 (Fujisawa Yukishi)
Maintenance information: 2024.3.7 maintained (rec function, tape monitor, gain, tape monitor, LOW HIGH filter, mode switch disassembly, polishing grease application, other volumes, switch cleaning, solder repair, power cord replacement, capacitor replacement, pin jack cleaning, operation check. (*The front pin jack input is fixed with rivets, so there is a lag ※When switching the impedance of the phono, the resistance value changes and the operation is normal, but there is not much change)
Accessories: none
Main specifications: phono circuit: MM2 system Phono 1:2.5 mV/50 kΩ Phono 2:2.5 mV/30 kΩ, 50 kΩ, 100 kΩ W410 × H170 × D270 mm 7 kg
Hamilex (Hayami Kosan) pedestal speaker stand. The direction of the top plate can be changed to vertical/horizontal orientation according to the speaker, and the mounting direction of the struts can also be changed according to the atmosphere of the speaker to be installed. (Fujisawa Yukishi)
Accessories: Instruction manual
Main specifications: Total load capacity 50 kg (1 unit) W350 × D320 × H400 mm Approx. 5.8 kg/unit
Maintained. Vacuum tube stereo power amplifier. A bright, fresh sound typical of DYNACO. The middle range is thick and has a sense of temperature, and it sounds more powerful than I expected. This is an amplifier I want to play in combination with JBL, Altec, etc. The exterior has oxidation, rust, and line damage (Fujisawa Yukishi)
Maintenance information: 2024.3.28 Maintained (Electrolytic capacitors and AC cords replaced each due to deterioration. Rubber foot replacement. Solder correction. Vacuum tube pin cleaning. Remove foreign objects. Wiring restyling. Bias check. I checked the output sound. (Although it is AC117V specification, it can operate at AC100V.)
Accessories: No accessories
Main specifications: rated output 35W+35W vacuum tube EL34 x 4 7199 x 2 GZ-34 x 1 W330 x H165 x D240 mm 12.5 kg
The disposal price has been reduced! (Member prices are not applicable) 2024/3/8 sales price 59,800 yen ※Saran net is out of stock. This is an attractive Victor powered subwoofer with a focus on accurate bass reproduction. The crossover can also be controlled from 40 to 120 Hz, and it is also possible to adjust the optimal sound to suit your preferences. There are thin threads on the exterior. Serial 094W0070 (Fujisawa Yukishi)
Maintenance information: 2024.3.8 operation confirmed
Accessories: power cord
Main specifications: sealed 30cm cone 88dB playback band 16 to 250 Hz maximum output 600 W W390 x H390 x D445 mm 25 kg
Comes with original box and pedestal! Super tweeter using an aluminum alloy thick cylindrical horn and an ultra-lightweight ring diaphragm. It is useful for high frequency correction etc. in a well-stretched, tight high frequency range. There are small scratches and dullness on the exterior. (FUJISAWA KOSHI)
Maintenance information: 2024.3.25 Operation confirmed
Accessories: instruction manual, original box, pedestal
Main specifications: Alnico magnet, 8Ω, playback frequency band, 5kHz to 35kHz, output sound pressure level, 106dB, recommended crossover, 7kHz or higher, input 50W, 800g/book
The price has been reduced. 2024/3/15 sales price 69,800 yen Maintained! 50Hz specification * Rotation is slightly fast, but this is the current situation due to product limitations (this is a level you can't understand when playing music) A rare vintage turntable that uses a belt drive system. An ultra-low speed 16-pole hysteresis synchronous motor is mounted as the drive motor, and a TP-13 is mounted on the tone arm. In addition to the tasteful design, you can enjoy the supple and mild sound typical of Torrens. There are scratches and line marks on the exterior. Serial 09070 (Fujisawa Yukishi)
Maintenance information: 2024.3.15 Maintained (belt replaced. Power cord and phono cable replacement Clean the motor and lubricate all parts. Arm elevation cylinder cleaning grease application. (Since there is no rotation synchronous motor adjustment, it flows slightly)
Accessories: instruction manual, genuine headshell
Main specifications: 16-pole hysteresis synchronous motor External dimensions: W394 x H125 x D325 mm Weight approx. 6.7 kg
A network adapter that converts USB 3.0 to SFP (only compatible with 1 Gbps) SFP ports can be added to Windows PCs or laptops without wired LAN ports. There is a line scratch on the bottom. *SFP module and 5V power adapter are sold separately. (FUJISAWA KOSHI)
Accessories: original box
Key specs: https://www.oliospec.com/shop/shopdetail.html?brandcode=000000010613&search=USB-SFP&sort =
The price has been drastically reduced! 2024/3/24 sale price 350,000 yen genuine Noah product. Dr. Ficult's armless turntable and 2 woodpeckers, which will be the first to arrive at Hi-Fi Hall, are now in stock! A simple structure with a belt drive for a 4.5 kg platter. It also supports 78 rotations and is compatible with SME 9 to 12 inch arms. Please enjoy the high sound quality of the advanced model Yuzuri. There are some scratches on the exterior. Serial 0247 (Fujisawa Yukishi)
Maintenance information: 2024.3.24 rotation operation confirmed
Accessories: instruction manual, AC adapter, stabilizer, protractor
Main specifications: belt drive 33, 45, 78 rotations W480 × H150 × D380 mm 17.5 kg
A custom-made line selector manufactured by A.Y. Electronics/L Sound. It is possible to switch between 3 channels.
There is dullness and dirt. (FUJISAWA KOSHI)
Maintenance information: 2024.3.28 continuity confirmed
Main specifications: W160 x H81 x D133 mm
The price has been reduced! 2023/10/7 sales price 20,000 yen This is a self-made MC boost transformer. According to the specifications, the boost ratio seems to be 1:10. Use high output cartridges such as DL-103! (FUJISAWA Yukishi)
Maintenance information: 2023.10.7 Operation confirmed
Accessories: none
Main specifications: MC boost transformer input/output 1 system boost ratio 1:10 W110 x H45 x D145 mm (actual measurement)
Heavyweight stone base with a thickness of 65 mm and a weight of 63 kg! Mirror finish on the whole surface! It looks good as a base for analog players, power amplifiers, and racks. There is a chip in the corner. ※The trolley is not included. We will estimate the shipping fee separately (Fujisawa Yukishi)
Accessories: none
Main specifications: W650 x H65 x D550 mm, measured 63.1 kg