Add search
19 results
Manufacture | Model/Title | Price | Arrival date

LP12+EKOS SE+RADIKALUK

Ask 24-42309-06047-00
LP12+EKOS SE+RADIKAL
Manufacture:LINN
Original price: JPY 2,803,000
Price: JPY 1,363,636
UK
Arrival: 2024-03-25 19:13:51
description
The LP12 is equipped with KEEL · EKOS SE · TRAMPOLIN2, and the power supply is the highest grade RADIKAL. A masterpiece player that came as a huge surprise to music lovers around the world. You can enjoy LINN's high S/N sound, which is precise and delicate, and makes you feel a sense of tension and dignity that shines brightly in serenity. The exterior has light scuffs on the main body and mounting marks on the arm screw mounting holes (Hiura Katsuji) Maintenance information: 2024.3.24 sound output confirmed Accessories: instruction manual power cable Main specifications: LP12+EKOS SE+RADIKAL+KEEL+TRAMPOLIN2 body dimensions W380 x H155 x D365 mm weight approx. 10 kg RADIKAL W350xD355 mmxH60 mm weight 10 kg EKOS SE dynamic balance type effective length 229 mm overhang 18 mm compatible cartridge weight 2 to 10 g 

4344U.S.A

Ask 24-42309-06043-00
4344
Manufacture:JBL
Original price: JPY 1,100,000
Price: JPY 634,545(pair)
U.S.A 1982 made
Arrival: 2024-03-25 19:39:35
description
Refreshed and maintained in 2021. It's the long-awaited blue baffle 4344. The vividness of the performance is expressed dynamically with a full mid-low range that sets it apart from the tall boy type, and a powerful sound image. It shows an unrivaled compatibility with jazz from the 70s and 90s, soul, rock, etc., even now. There are repair marks on the exterior (Hiura Katsuji) Maintenance information: 2021.5.1 maintained (exterior repair/polishing/oil finish front and rear baffle coating saran net replacement saran plate repair diffuser cleaning woofer maintenance mid maintenance driver maintenance (magnetic circuit gap cleaning/center adjustment sound absorbing material replacement screw replacement various cleaning) Tweeter maintenance (magnetic circuit gap cleaning/center adjustment, various cleaning) unit detachable terminal rust removal, acid washing, insulation bush & mounting screws replacement, internal connection terminal replacement from faston to round terminal, ATT brand new replacement, INT/EXT switching SW contact sulfide removal, polishing, and cleaning. Frequency characteristic measurement check (~ 42 kHz) is performed, and only 1 μF for UH (tweeter) is exchanged, input/output waveform and balance confirmation sound output check) Accessories: saran net diffuser Main specifications: 4-way 4-speaker bass reflex unit 2235H 2122H 2421B 2405H frequency band 35 Hz to 20 kHz 8 ohms sound pressure level 93 dB W635 x H1,051 x D435 mm 96 kg

AP-M1+3010RJapan

This item has been sold.You can't purchase now. 24-42087-04295-00
AP-M1+3010R
Manufacture:MICRO
Original price: JPY 388,000
Price: JPY 498,182 Sold Out
Japan 1987 made
Shop: Osu shop
Arrival: 2024-03-23 19:46:09
description
A record player with an excellent sense of stability developed by condensing the high inertia concept realized with the SX-8000 /2 into a compact integrated player. The SME 3010R is mounted to achieve strong, thick, and outstanding analog sound with cuts. The overwhelming performance that brings out the full amount of information on a vinyl record is attractive. The exterior has dullness and small scratches. Serial 09040193 (Yonejima Satoshi) Maintenance information: 2024.3.23 Maintained (servo board pitch volume center adjustment. Power circuit electrolytic capacitor replacement. Arm weight O-ring replacement. Weight adjustment screw part cleaning. Turntable fixing screw installation rotation, arm operation, voice check) Accessories: power supply unit, handle, instruction manual, power cord Main specifications: [AP-M1] belt drive system, 8-pole hysteresis, synchronous motor, CR oscillator, BTL amplifier drive, 33 1/3, 45 rpm switching, ± 4% fine-adjustable size: W463 x H165 x D377 mm weight: 28 kg [3010R] short arm static balance type effective length: 237 mm cartridge mounting weight range: 1.5 to 26 g (cartridge only) 9.5 to 34 g (shell) Including) Variable needle pressure range: 0 to 5 g Slide base: ± 12.7 mm

BL-111+AC-3000 LimitedJapan

This item has been sold.You can't purchase now. 24-41845-02475-00
BL-111+AC-3000 Limited
Manufacture:MICRO
Original price: JPY 270,000
Price: JPY 343,636 Sold Out
Japan 1980 made
Shop: Osu shop
Arrival: 2024-03-22 20:04:50
description
The price has been drastically reduced. 2024/3/22 sales price 448,000 yen Maintained! The famous micro BL-111 is equipped with AC-3000 Limited, which is rarely in stock! The sound created by combining the unique bulge of the gunmetal turntable with an arm with strong depiction power is accurate, and it is reproduced faithfully to the original sound. Please enjoy the thick analog sound that is the opposite of digital. There are dullness and discoloration on the turntable, and there are dullness and bumps in places on the main unit. S-shaped arm only (Kojima Yosuke) Maintenance information: 2024.3.22 Maintained (1 logic IC replaced. Replace deteriorated capacitors and semi-fixed resistors on each board. Rotation switching SW contact cleaning, power supply SW, rotation adjustment VR replacement. Turntable shaft disassembly and cleaning, internal bearing ball replacement. Motor disassembly and cleaning, internal rotor cleaning, assembly after lubrication. Arm disassembly, exterior cleaning, internal bearing replacement. Replace the power cable. After assembling the main unit, rotation speed was adjusted, needle pressure was checked, each speed was checked, sound output was tested, and overall operation was confirmed) Accessories: BL-111: copy of instruction manual, power cable, turntable puller, AC-3000 Limited: original box, subweights, tools Main specifications: tone arm/static balance type one-point support, screw cord dump needle pressure range 0 to 3 g 0.25 g step anti-skating device, lateral balancer cartridge, dead weight 3 to 17 g, record player/belt drive type, 33/45 rotation, W532 x H230 x D440 mm, 38 kg
New Rectangular York
Manufacture:TANNOY
Original price: JPY 456,000
Price: JPY 270,909(pair)
UK 1974 made
Arrival: 2024-03-07 19:54:26
description
The disposal price has been reduced! (Member discounts are not applicable) 2024/3/7 sales price 398,000 yen Exterior maintenance completed! Replace network capacitors with SOLEN film capacitors. The unit is DENTECH Tune HDP385, and the enclosure is made by Shinkosha. The unit is attached by removing the back plate, and the net does not come off the front. Classical music also goes well with symphonies. The exterior is generally beautifully finished due to maintenance. Serial AYT71012 AYT71012 (Tomonori Asaine) Maintenance information: 2024.3.7 Maintained (exterior repair/cleaning) Rear baffle paint saran net replacement unit maintenance (exterior cleaning, low range center adjustment, screw tightening, high frequency magnetic circuit slit cleaning/center adjustment) ATT cleaning/knob adjustment unit detachment) 2015.5.14 Maintained (network capacitors replaced with SOLEN. Unit edge replacement. Magnetic circuit overhaul and operation adjustment. Saran net partial cleaning net tear repair, complementary color correction) Accessories: none Main specifications: used unit HPD385 frequency characteristics 20Hz to 20kHz allowable input 85W 92dB 8Ω W600 x H1075 x D380 mm approx. 42 kg/bottle

TA-E901Japan

Ask 21-30302-01116-00
TA-E901
Manufacture:SONY
Original price: JPY 250,000
Price: JPY 189,091
Japan 1982 made
Shop: Osu shop
Arrival: 2023-03-10 18:41:31
description
The disposal price has been reduced. Member prices are not applicable. 2023/5/13 sales price 250,000 yen*The main volume, BASS, and TREBLE knob textures are different from the original. Internal parts have been thoroughly reviewed and maintenance has been carried out! This is a control amplifier from Sony's high-end brand, the Esprit series. Straight sound with a sense of speed similar to the TA-E900. The outline is clear and the sound image is drawn clearly. It is a vintage speaker and is especially recommended for jazz and rock fans. On the exterior, in addition to dullness and small scratches, there is a feeling of use, such as sticker marks on the top plate. Serial 200616 (Hiroki Aso) Maintenance information: 2023.3.4 maintained (running test by refining the I/O board and screw parts) 2022.10.1 maintained (condenser semi-fixed resistance relay LED lamp IC spark killer Capricorn washer replacement implementation all SW VR disassembly cleaning board solder surface re-solder input/output waveform confirmation and left and right balance confirmation comprehensive operation test) Accessories: copy of instruction manual Main specifications: 2 PHONO inputs, 5 line inputs, 2 pre-out systems, W480 x H105 x D465 mm, 12.5 kg

P-172UK

Ask 23-41323-26523-00
P-172
Manufacture:Musical Fidelity
Original price: JPY 290,000
Price: JPY 86,182
UK 1987 made
Arrival: 2023-12-15 20:03:46
description
The disposal price has been reduced! (Member discounts are not applicable) 2023/12/15 sales price 118,000 yen Maintained! The thin preamp from the musical Fidelity has an English style taste where you can feel the elegance, and the perfect balance of high frequencies that don't insist too much on the thick, thick mid-low range unique to this era feels good. The tape/monitor switch has been repaired and replaced and is a non-genuine product. The exterior is dull overall, with small scratches and a lot of feeling of use (Asaine Tomoho) Maintenance information: 2023.10.26 maintained (TAPE1 monitor switch defective → non-genuine silver knob replacement. Rear terminal screw idle rotation all replacement, operation check) 2023.10.12 maintained (main VOL noise → replacement. Treble distortion noise VOL replacement (original not available, replacement with replacement, no click on the midpoint position) IC, DC leak defect replacement, capacitor deterioration replacement, operation check. (We will not be able to respond if the dedicated parts are defective in the future) Accessories: none Main specifications: external power supply system with PHNON (MM MC) CR type RIAA equalizer output 2 systems W482 x H57 x D166 cm 3.0 kg

AU-α707Japan

Ask 24-42235-05485-00
AU-α707
Manufacture:SANSUI
Original price: JPY 129,000
Price: JPY 72,545
Japan 1986 made
Arrival: 2024-03-15 19:48:13
description
Maintained in November 2023! The middle class of the Sansui α series. The strength of the bass and the sharpness of the mid to high notes are mixed in a well-balanced manner, so you can enjoy not only jazz, but also various genres such as rock and pop music. The exterior is dull and the top plate is damaged. Serial 637065630 (Tomonori Asaine) Maintenance information: 2023.11.23 Maintained (disassembling and polishing grease applied to each switch (tone, turnover, loudness, muting, subsonic, power amplifier direct, MM/MC, reckout switch), each volume and switch clean output relay and headphone relay replacement main amplifier and power supply part solder repair, interior and exterior inspection, cleaning, side cover screw replacement operation confirmation when power is turned on (It makes a popping sound, but it stabilizes in a few minutes) Accessories: copy of instruction manual Main specifications: effective output 160W+160W (6Ω) 130W+130W (8Ω) damping factor 100 (6Ω) W448 × H160 × D441 mm 20.3 kg

MC30SDenmark

Ask 24-42343-06342-00
MC30S
Manufacture:ortofon
Original price: JPY 70,000
Price: JPY 59,091
Denmark
Arrival: 2024-03-28 19:32:04
description
Lots of accessories! The MC30S (MC30 Supreme), the upper model of the MC20S (MC30 Supreme) has a high output of 0.5 mV, which not only has a sense of dynamism and power, but is also characterized by a delicate and elegant high frequency. In classical music such as jazz and rock, there is a sense of depth in the performance, and it stretches well, and you can feel the luster of stringed instruments, etc. There is a feeling of use on the exterior, such as dullness and scratches on the body (Hiroki Aso) Maintenance information: 2024.3.28 sound output checked Accessories: instruction manual, original box, lead wire, simple needle pressure gauge, brush, needle cover, mounting screws Main specifications: MC type output 0.5 mV internal impedance 5 ohms needle pressure 1.8 g to 2.2 g dead weight 10.7 g

4530BKU.S.A

Ask 24-41845-02482-00
4530BK
Manufacture:JBL
Original price: JPY 156,000
Price: JPY 50,000(pair)
U.S.A
Shop: Osu shop
Arrival: 2024-02-13 19:51:18
description
※It has been repainted and is inexpensive because it is in poor condition. JBL original product. A floor-type enclosure that uses a rear-loading horn system. The interior has a folding horn structure with a total length of 2 meters, making it possible to reproduce powerful bass far exceeding its size. The exterior is scattered with chipped corners, scratches, and dullness. Shipping costs will be estimated separately (Mizusaki Ryo) Accessories: screws Main specifications: hole diameter 365 mm, screw pitch 420 mm backroad horn compatible speakers 2205, 2225, E140 minimum playback frequency 50 Hz main material particle board+Yonematsu laminated plywood (front baffle/road horn) W603 x H12 x D603 mm approx. 54 kg

A-342

Ask 23-40453-20043-00
A-342
Manufacture:TAMURA
Price: JPY 47,273(pair)
Shop: Osu shop
Arrival: 2023-09-23 20:26:22
description
Screwdriver Transpair sale 1st order: 5 kΩ 2nd order: 5 kΩ CT/1.25 ksplit DC30mA 50 to 15 kHz output level 30dBm W76 × H83 × D44mm 0.7 kg (actual measurement, including protrusions) One side with original box seems to be an unused item due to the state of the terminal! (KOJIMA Yosuke) Accessories: original box
38cmダブルウーファー用エンクロージャー
Manufacture:不明
Price: JPY 40,727(pair)
Arrival: 2021-02-26 19:22:33
description
Price cut (2021.2.26 selling price 49,800 yen) Unknown 38cm double woofer enclosure. Front load horn type that mounts the woofer up and down. There is quite a feeling of use such as whole scratches, paint peeling part scattered. (Takasaki Takasaki) Main specifications: aperture direct system about 355mm, screw diagonal about 420mm W760 × H1125 × D670mm Approx. 88kg

V15 Type4U.S.A

Ask 23-41195-25521-00
V15 Type4
Manufacture:SHURE
Original price: JPY 39,800
Price: JPY 22,727
U.S.A 1978 made
Arrival: 2023-12-26 19:54:35
description
※Since the screw fixing part is missing, it is inexpensive. The needle tip is JICO/VN45HE. The impression is that sharper resolution and a sense of dynamism have been added than Type 3. The tracing ability is extremely high, and it picks up the sound engraved in the sound groove without omission. The stylus is moving slightly to the left (Tamura Eiji) Maintenance information: 2023.12.26 operation confirmed Accessories: none Main specifications: mm type output voltage 4 mV needle pressure 0.75 to 1.25 g internal impedance 47 kΩ dead weight 7 g

3WAYエンクロージャーJapan

Ask 22-35186-35923-00
3WAYエンクロージャー
Manufacture:SANSUI
Price: JPY 22,727(pair)
Japan
Shop: Osu shop
Arrival: 2022-04-27 20:10:30
description
An enclosure that seems to be for Sansui's old system component speakers. The lattice box with legs reminiscent of JBL's Baron and Bicount is really fashionable. The lattice on both the left and right is out of the frame. There are traces of internal remodeling (Fujisawa Koshi) Accessories: None Main specifications: opening diameter 212mm (screw pitch 240mm), aperture diameter 110mm (countertop 170mm, screw pitch 140mm), opening diameter 95mm (for bass reflex port/wood screw pitch 118mm), aperture diameter 70mm (Countertop 92mm, Screw Pitch 104mm) 14mm Particle Board, Veneer Finish W500 × H665 × D430mm 15kg

1インチ用ホーン

Ask 20-27625-25574-00
1インチ用ホーン
Manufacture:不明
Price: JPY 20,000(pair)
Shop: Osu shop
Arrival: 2020-05-27 19:33:32
description
The price has been reduced. 2020/5/26 Sales price 29,800 yen Probably a 1 inch horn made by Raft Craft. When checked on the painted part, it is made of FRP-like material, and it is lightweight for its size, and can be carried by one man alone. The screw hole has holes for both ALTEC and JBL. There are many usability, dullness, scratches, paint peeling, etc. (Yoichi Murakoshi) Accessories: None Main specifications: Measured outer diameter dimensions approx. W835 × H250 × D835 mm Actual measured weight approx. 20.4 kg

2M BlueDenmark

Ask 24-42343-06344-00
2M Blue
Manufacture:ortofon
Original price: JPY 27,000
Price: JPY 18,000
Denmark
Arrival: 2024-03-28 19:32:17
description
Comes with original box! This is BLUE from the 2M series. Ortofon's popular series with a wide range and vibrant sound. It makes you enjoy sharp sounds from popular to jazz (Hiroki Aso) Maintenance information: 2024.3.28 sound output checked Accessories: instruction manual, original box, needle cover, mounting screw, brush Main specifications: mm type output voltage 5.5 mV frequency characteristics 20 to 25,000 Hz internal resistance 47 ohms suitable needle pressure 1.8 g dead weight 7.2 g

TKS-1

Ask 22-35808-40419-00
TKS-1
Manufacture:TAMURA
Price: JPY 9,091(pair)
Shop: Osu shop
Arrival: 2023-10-08 19:51:27
description
* Since there are difficulties with the attachment part on both sides, it is inexpensive. Line matching transformer sold primary: 600 ohms, output 10 dBm, frequency range, 50 to 10 kHz, W44 x H65 mm, 0.25 kg/piece, the head of the mounting bolt on one side is flying off, and there is distortion in the screw hole on the other side (Kojima Yosuke) Accessories: none

ドライバーアダプター

Ask 17-11268-53151-00
ドライバーアダプター
Manufacture:不明
Price: JPY 9,091(pair)
Shop: Osu shop
Arrival: 2023-08-03 19:26:58
description
The driver and how to use it are unknown. It's an item I bought with WE555 before, but I don't know if it fits 555. Please judge from the dimensions. Made of metal (Yasuhito Koshihama) Main specifications: outer diameter 40mm inner diameter screw part approx. 35mm height 25mm upper outer diameter 24mm inner diameter 20mm

FI-15Japan

Ask 24-42260-05710-00
FI-15
Manufacture:FURUTECH
Original price: JPY 2,500
Price: JPY 1,091
Japan
Arrival: 2024-03-19 19:49:10
description
PSE standard product UL compliant FURUTECH inlet plug is a non-magnetic material design using gold-plated copper screws and stainless steel parts (Tamura Eiji) Accessories: No accessories
19 results
UsedUsed
ConsignedConsigned
HoldHold
ReservedReserved
Sold OutSold Out