Mount adapter compatible with 35mm diameter speaker stands. This adapter is used when mounting speakers that do not have a hole in the bottom (Tetsuji Oikawa)
Main specifications: load capacity approx. 30 kg, stand mount diameter: 35 mm, base thickness: approx. 8 mm
※Since there are 3 missing corners, it is inexpensive. Sorbothane Square Insulators, Set of 4, Black Type When vibration is cut with sorbocaine, a phenomenon occurs where low frequencies clearly and dynamically come out of the speaker itself. The exterior is dull, etc., and there is a feeling of use (Murakoshi Yoichi)
Accessories: none
Main specifications: size 30 mm square height 10 mm
Only 1 bottle unopened! Unspecified XLR (male) to XLR (female) relay plug. The exterior is good (Kobayashi Hitoshi)
Maintenance information: unopened, unchecked
Accessories: none
The price has been reduced. 2023/9/6 sales price 1,000 yen. J1 Project hybrid spike base. Only 1 of the 3-piece set is unopened (Kobayashi Hitoshi)
Maintenance Information: Unopened
Accessories: label
Main specifications: hybrid spike base polymer composite FAR561+ stainless steel saucer diameter 35 mm x height 15 mm maximum load weight 174 kg
The price has been reduced. 2023.9.5 sales price 8,000 yen. 8-piece set of MA15 type JBL speaker mount parts with unknown details. There is some paint peeling on the exterior (Kobayashi Hitoshi)
Accessories: none
Unspecified XLR (male) to RCA (female) conversion plug only. The appearance is good with little feeling of use (Kobayashi Hitoshi)
Maintenance information: 2023.8.14 Confirmation confirmed
Accessories: none
Main specifications: No. 2 HOT
Unspecified arm stabilizer. It was used on DA-308 (Daiki Goto)
Accessories: none
Main specifications: diameter 48 mm height 49 mm weight 800 g screw hole diameter 19 mm (actual measurement)
The price has been reduced. 2023/2/10 sales price 5,000 yen. This pan lock is used when storing an amplifier in a wooden case. There are 2 10-inch and 12-inch bracket positions, and amplifiers of 2 different sizes can be attached. The models that can be used are not known here, so please carefully check the target products to be used before purchasing. There is a feeling of use and scratches on the exterior (Hiura Katsutsugu)
Accessories: none
Main specifications: W30 x H110 x D330 mm Weight approx. 400 g
Disposal prices have been reduced. The 2020/2/10 sales price is 3,000 yen. ※It is inexpensive because it is in poor condition. Ceiling hanging bracket for the company's speaker 301 MM/2. It can be adjusted up and down by ± 90 degrees, and can be rotated 360 degrees horizontally. The feeling of use, rust, dullness over time, and stains are severe, and there are places with rust. (WATANABE Tadashi)
Accessories: none
Main specifications: W248 x D150 x H195 mm 1.4 kg/piece
Disposal prices have been reduced. Member discounts are not applicable. 2022/7/10 sales price 4,000 yen. BOSE 301MM Ceiling Mount Bracket I checked the installation, but the specifications seem to be slightly different from the original (Murakoshi Yoichi)
Accessories: mounting screws
Main specifications: Mounting bracket, inner size, 234 x 150 mm, mounting screw position (diagonal), 80 x 80 mm, external dimensions 243 x 350 x 150 mm, 1.35 mm
An adapter that converts a pin plug into an L type. L-type conversion, convenient for connecting in tight spaces, etc. The terminals have an all-metal body with a gold-plated finish (Tetsuji Oikawa)
Accessories: original box
Main specifications: 2 pieces, 1 pair, outer diameter 12 mm
※Operation not checked. This is a standalone remote control for the TRIODE TRV-A300XR. If you have been looking for it, please take this opportunity. There is an exterior, small wounds, and dullness (Kobayashi Hitoshi)
Maintenance information: operation unconfirmed
Accessories: none
Digital cable 1.0m RCA terminal It uses a titanium-containing sheath, OFC (oxygen-free copper) wire, gold-plated contacts that are resistant to aging, and a sturdy metal pin plug with strong reliability. Good product with little feeling of use (Kanai Hidetsugu)
Maintenance information: 2023.7.20 Conductivity confirmed
Accessories: original box
Technica's D-terminal selector. Devices with 4 D terminals can be switched with one touch with a select switch*Can be used as 4 inputs/1 output system, or 1 input/4 output systems, but there is no distribution output (simultaneous output) function (simultaneous output) function (Oikawa Tetsuji)
Accessories: none
Main specifications: W240 x H53 x D182 mm 750 g
Unknown wood cabinet. Cushioning material is attached to the inside. There are small scratches and dull stains (Sasaki Shota)
Accessories: none
Main specifications: W470 x H120 x D390 mm Weight 1.8 kg (actual measurement)
Disposal prices have been reduced! (Member discounts are not applicable) 2022/5/18 sales price 2,000 yen When used between an S-terminal AV noise filter device and a display, unnecessary noise is removed without deteriorating the amount of information or high frequency characteristics of the video signal at all, and the video signal is organized. The exterior is dull and dirty, and there are floating marks on the label. (TAMURA Eiji)
Maintenance Information: 2022.5.18 Continuity Confirmed
Accessories: There are no accessories
※1 bottle only. A vertical stand dedicated to the company's 33WER/33WER-S. If you've been looking for one, don't miss this opportunity. (YONEJIMA Satoshi)
Accessories: instruction manual, original box
Main specifications: actual measurement approx. W202 x H65 x D202 mm weight 950 g/unit
The price has been drastically reduced. 2023/9/11 sales price 600 yen. Set of 4 I think it's Cag's Vale. Details unknown. An insulator made of a hard rubber-like material. How about under an audio rack etc. (Murakoshi Yoichi)
Accessories: none
Main specifications: diameter 70 x H7 mm approx. 31 g
The driver and how to use it are unknown. It's an item I bought with WE555 before, but I don't know if it fits 555. Please judge from the dimensions. Made of metal (Yasuhito Koshihama)
Main specifications: outer diameter 40mm inner diameter screw part approx. 35mm height 25mm upper outer diameter 24mm inner diameter 20mm
The price has been reduced. 2023/6/27 sales price 15,000 yen Qables Potaan is 192 kHz compatible. It supports up to 192 kHz/24 bit via the SPDIF digital input terminal and 48 kHz/16 bit via USB. For those looking for high quality sound anywhere easily (Oikawa Tetsuji)
Maintenance Information: 2023.6.27 Operation confirmed
Accessories: connection cord, case
Main specifications: W70 x H23 x D126 mm 200 g
Self-made cabinet for GARRARD 301 with double arm specifications. The 3012 Series 2 and SMG-212 were mounted on the tone arm installation port. You can see the appearance, peeling veneer, abrasions, bruises, etc., and a feeling of use (Kobayashi Hitoshi)
Accessories: none
Main specifications: W760 x H265 x D520 mm 14.4 kg (actual measurement)
A Yamaha mid-size speaker bracket that can be mounted on a wall or ceiling. It can be used for small speakers such as the NS-10MT and surround speakers. The exterior has dark spots and small scratches (Hitoshi Kobayashi)
Accessories: none
Main specifications: W155 x H190 x D80 mm 0.85 kg
*Currently sold. Audio-Technica optical digital splitter. Distribute 1 input system to 4 systems. There is an appearance, dullness, and a feeling of use (Kobayashi Hitoshi)
Maintenance Information: 2023.5.13 Sound output confirmed
Accessories: original box, AC adapter, instruction manual
Main specifications: 1 optical input system/4 output systems W70xD95xH32mm 154.5 g (actual measurement)
*Currently sold. Audio-Technica optical digital splitter. Distribute 1 input system to 4 systems. There is an appearance, dullness, and a feeling of use (Kobayashi Hitoshi)
Maintenance Information: 2023.5.13 Sound output confirmed
Accessories: original box, AC adapter, instruction manual
Main specifications: 1 optical input system/4 output systems W70xD95xH32mm 154.5 g (actual measurement)
*Currently sold. Audio-Technica optical digital splitter. Distribute 1 input system to 4 systems. There is an appearance, dullness, and a feeling of use (Kobayashi Hitoshi)
Maintenance Information: 2023.5.13 Sound output confirmed
Accessories: original box, AC adapter, instruction manual
Main specifications: 1 optical input system/4 output systems W70xD95xH32mm 154.5 g (actual measurement)
*Currently sold. Audio-Technica optical digital splitter. Distribute 1 input system to 4 systems. There is an appearance, dullness, and a feeling of use (Kobayashi Hitoshi)
Maintenance Information: 2023.5.13 Sound output confirmed
Accessories: original box, AC adapter
Main specifications: 1 optical input system/4 output systems W70xD95xH32mm 154.5 g (actual measurement)
※This product is currently on sale.. Audio-Technica optical digital splitter. Distribute 1 input system to 4 systems. There is an appearance, dullness, and a feeling of use (Kobayashi Hitoshi)
Maintenance Information: 2023.5.13 Sound output confirmed
Accessories: original box, AC adapter
Main specifications: 1 optical input system/4 output systems W70xD95xH32mm 154.5 g (actual measurement)
*Currently sold. Audio-Technica optical digital splitter. Distribute 1 input system to 4 systems. Appearance, dullness, lack of rubber feet, feeling of use (Kobayashi Hitoshi)
Maintenance Information: 2023.5.13 Sound output confirmed
Accessories: original box, AC adapter
Main specifications: 1 optical input system/4 output systems W70xD95xH32mm 154.5 g (actual measurement)
*Currently sold. Audio-Technica optical digital distribution selector. The input is switchable between 2 systems, and the output is distributed to 2 systems. The appearance is good with little feeling of use (Kobayashi Hitoshi)
Maintenance Information: 2023.5.13 Sound output confirmed
Accessories: original box, AC adapter, instruction manual
Main specifications: OPTICAL input 2 systems (switchable), 2 output systems, W70xD95xH32mm156.5g (actual measurement)
Unspecified wood cabinet. There is a hit scratch (Goto Daiki)
Accessories: none
Main specifications: outer dimensions W45 x D260 x H195 mm weight 2.4 kg inner dimensions W370 x H145 mm (actual measurements)
The price has been reduced. 2022.12.5 sales price 39,800 yen Arm base for the company's tone arms MH-104S and MH-124S. Machined stainless steel gives it a sense of luxury (Sasaki Shota)
Accessories: none
Main specifications: 24mmbase stainless steel machined 340g mounting board hole φ25mm mounting board thickness ~ 20mm
※Delivered as is. Audio-Technica optical digital distributor. 1 input system is distributed to 4 systems. There is tape wrapped and sticker attached to the base of the AC adapter cord (Murakoshi Yoichi)
Maintenance information: 2023.5.13 sound output confirmed
Accessories: original box, instruction manual, AC adapter
Main specifications: 1 OPTICAL input system/4 output systems W70xD95xH32mm 154.5g (actual measurement)
The price has been reduced. 2023.4.10 Turntable seat with sale price 2,000 yen unknown manufacturer. The material is soft and can be expected to have a vibration suppression effect. The exterior is scratched, dirty, and dull, and there is a feeling of use (Katsutsugu Hiura)
Accessories: none
Main specifications: thickness 4mm
The price has been reduced. 2023.1.21 Sales price 2,000 yen Plastic cover for 28cm units of unknown manufacturer. Outer frame and inner ring set There are abrasions and a feeling of use (Kanai Hidetsugu)
Accessories: none
Main specifications: maximum dimensions W372 x H28 mm inner diameter 270 mm outer 4 holes diagonal screw pitch 345 mm inner ring diagonal screw pitch 289 mm
Variable Resistor Attenuator Bridge T Type 21 Steps Maximum Attenuation 50 dB Impedance 600 Ohms W45 x 64 mm 140 g with Volume Knob (Kojima Yosuke)
Accessories: volume knob (attached to the main unit)
The price has been reduced. 2021/5/6 sales price 7,000 yen turntable seat for Garrard 301. The condition is not very good, such as slight undulations and wrinkles. (KONDO HIROTSUGU)
Accessories: original case
It is set directly into the shell to achieve a pattern where records are cleaned at the same time as playing them. There is a feeling of use (Hitoshi Kobayashi)
Accessories: original box, instruction manual
Main specifications: http://www.ebay.com/itm/Vintage-Discwasher-DiscTraker-PRINT-AD-from-1977-/161709875921
This is a self-made baffle made in a size like JBL VICOUNT or BARON. There is a hole for the 38cm unit to fit, and a hole that is thought to be for a screwdriver. In the screw hole
Accessories: none
Main specifications: woofer section screw pitch 370 mm aperture φ343 mm driver opening 133 mm external dimensions W443 x H518 x D20 mm weight approx. 1.5 kg (one side, actual measurement)
The price has been reduced. 2018/3/3 selling price 10,000 yen Technics ring for fixing horns. Recommended for self-made people (Oikawa Tetsuji)
Accessories: none
Main specifications: Inner circumference diameter 95mm (actual measurement)
The price has been reduced. 2017/10/6 sales price 3,000 yen This is a speaker mounting bracket when using the speaker system PS-S200 series etc. as a ceiling suspension. There are spots, rust, and small scratches on the exterior. One single-sided pin is missing (Wang Exhibition)
Accessories: none
Main specifications: compatible models PS-S224W/WH, PS-S226W, PS-S203W, PS-S204W, PS-S207W,
PS-S550W, PS-S552W, PS-S553, etc. Load capacity 12 kg, angle adjustable 1.13 kg
The price has been reduced. 2022 10/1 selling price 20,000 yen arm base with unknown details. It is similar to the micro A-1201, etc., but the diameter of the hole is about 19mm (Oikawa Tetsuji)
Accessories: none
Main specifications: 1.6 kg (actual measurement)
2-row 6-piece outlet plate made of corrosion-resistant aluminum alloy+fully coated new metal There is a feeling of use such as small scratches (Kanai Hidetsugu)
Accessories: none
Main specifications: W120 x H116 x D6.5 mm weight 38 g
Hamilex (Hayami Kosan) pedestal speaker stand. The direction of the top plate can be changed to vertical/horizontal orientation according to the speaker, and the mounting direction of the struts can also be changed according to the atmosphere of the speaker to be installed. (Fujisawa Yukishi)
Accessories: Instruction manual
Main specifications: Total load capacity 50 kg (1 unit) W350 × D320 × H400 mm Approx. 5.8 kg/unit