The price has been reduced! 2024/4/5 sales price 1,200 yen ※It is cheap because it is in poor condition. Audio-Technica machined aluminum block Q dump type headshell. The main body is dumped with anti-vibration rubber (Asaine Tomo Law)
Maintenance information: 2024.4.5 continuity confirmed
Accessories: none
Main specifications: machined aluminum block, dead weight 12.5g
A rare item. The shell that came standard with the LUSTRE/GST-1 tonearm. It's not heavy on its own, so it's easy to use, and the punch line enhances the design. (FUJISAWA KOSHI)
Maintenance information: 2024.4.12 continuity confirmed
Accessories: No accessories
Main specifications: 7.5 g dead weight (actual measurement)
Unspecified silver shell. There is a feeling of use due to appearance, dullness, abrasions, etc. (Asae Tomoho)
Maintenance information: 2024.4.18 continuity confirmed
Accessories: none
Main specifications: dead weight g (actual measurement)
A rare item. The shell that came standard with the LUSTRE/GST-1 tonearm. It's not heavy on its own, so it's easy to use, and the punch line enhances the design. (FUJISAWA KOSHI)
Maintenance information: 2024.4.12 continuity confirmed
Accessories: No accessories
Main specifications: 7.5 g dead weight (actual measurement)
Undetailed, headshell similar to the exterior of the Technics SH-98D. It's a simple dish that seems to be easy to use (Oikawa Tetsuji)
Accessories: none
Main specifications: dead weight 7.3 g (actual measurement)
An aluminum-pressed headshell very similar to SME's S-2 and Sansui. It is a split finger type. There is a mark where the logo has come off on the front (Murakoshi Yoichi)
Maintenance information: 2024.3.7 sound output confirmed
Accessories: none
Main specifications: dead weight 9g
The price has been reduced! 2024/4/11 selling price 3,000 yen headshell with unknown details. The body shape and finger position are unusual shapes that are different from normal. The exterior has a feeling of use such as dullness and dirt (Takahashi Nobuyuki)
Maintenance information: 2024.4.11 continuity confirmed
Accessories: none
A popular Fidelity-Research headshell. The headshell has a simple design and is compatible with light needle pressure tone arms (Yamato Yuki)
Maintenance information: 2024.4.16 continuity confirmed
Accessories: none
Main specifications: aluminum stamping dead weight 7.6g
This classic headshell is made of magnesium alloy and has an attractive, unobtrusive sound. Overhang and left/right tilt adjustments are possible. There is peeling on the horn (Fujisawa Yukishi)
Maintenance information: 2024.4.13 continuity confirmed
Accessories: original box
Main specifications: dead weight 10g
A classic shell made from machined aluminum blocks. I like the sturdy construction and simple design (Daiki Goto)
Maintenance information: 2024.4.11 continuity confirmed
Accessories: none
Main specifications: machined aluminum block body weight 13g
This classic headshell is made of magnesium alloy and has an attractive, unobtrusive sound. Overhang and left/right tilt adjustment are possible (Fujisawa Yukishi)
Maintenance information: 2024.4.13 continuity confirmed
Accessories: No accessories
Main specifications: dead weight 10g
Classic GRACE shell. The strong and lightweight construction with aluminum press processing is attractive. It is a product that brings out the characteristics of cartridges (Tomoho Asaine)
Maintenance information: 2024.4.18 continuity confirmed
Accessories: none
Main specifications: aluminum press processing dead weight approx. 11g
with logo! This headshell is popular due to its combination with the Technics and SL-1200 series. It is made of highly rigid die-cast aluminum and brings out the characteristics of the cartridge (Murakoshi Yoichi)
Maintenance information: 2024.4.17 continuity confirmed
Accessories: none
Main specifications: Die-cast aluminum, dead weight 10.2 g
Orthophone's classic headshell. The finger tips are ergonomically designed and are designed to be easy to operate. It is light in weight and is compatible with various cartridges and tonearms. There is a feeling of use such as a slight small scratch (Yamato Yuki)
Maintenance information: 2024.4.16 continuity confirmed
Accessories: none
Main specifications: aluminum gold-plated terminals, dead weight 9.4 g
Orthophone's classic headshell. The finger tips are ergonomically designed and are designed to be easy to operate. It is light in weight and is compatible with various cartridges and tonearms. There is a feeling of use such as a slight small scratch (Yamato Yuki)
Maintenance information: 2024.4.16 continuity confirmed
Accessories: none
Main specifications: aluminum gold-plated terminals, dead weight 9.4 g
Audio-Technica's lightweight hard shell. It is compatible with cartridges that are sharp and sharp. The connection between the fuselage part and the arm is made of separate parts, making it difficult for extra signals to be transmitted. (TAMURA Eiji)
Maintenance information: 2024.3.30 continuity confirmed
Accessories: none
Main specifications: aluminum dead weight 12 g (actual measurement)
Heavyweight metallic design headshell Technihard materials are used for surface treatment. It can be expected to tighten the sound (Tamura Eiji)
Maintenance information: 2024.3.30 continuity confirmed
Accessories: none
Main specifications: aluminum 15g
Coral headshell The weight has been reduced, and the mounting position can also be adjusted, so it is an easy shell to handle (Oikawa Tetsuji)
Main specifications: dead weight approx. 14g
One of the few straight arm headshells. The small die-cast aluminum has high rigidity, and in combination with the straight arm, you can enjoy tight analog sound. There is little feeling of use and it is generally good (Mizushima Itsuro)
Maintenance information: 2024.4.4 continuity confirmed
Accessories: none
Main specifications: aluminum die-cast straight arm for weight 5g
An audiocraft headshell that uses a perfect lock pin in addition to hard aluminum molding. It brings out the full performance of the cartridge, where you can also feel the beauty of the form (Daiki Goto)
Maintenance information: 2024.4.11 continuity confirmed
Accessories: none
Main specifications: Perfect Lock pin, hard aluminum molding, dead weight 13.7 g
The price has been reduced. 2024/4/13 sales price 8,000 yen. Magnesium alloy body headshell Since it has excellent vibration absorption, it maximizes the potential of the cartridge. In addition to the exterior and lead being changed to a single wire, there are slight mounting marks, dullness, and a feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.4.12 continuity confirmed
Accessories: original box
Main specifications: Twin lock pins made of magnesium alloy, weight 12 g
A popular SME classic headshell with a stylish design. It's lightweight, which is essential for light needle pressure arms and heavy cartridges, and after all, this is the best fit for SME arms (Sasaki Shota)
Accessories: none
Main specifications: aluminum stamping dead weight 8g