Every detail from exterior to interior has been maintained! The JBL Studio Monitor 4355 with dedicated channel divider 5235 is in stock for the first time in a long time! The final model of the JBL studio monitor, double woofer. The enclosure volume is the same as 4350, but since the thickness of the top plate etc. is different, the outer dimensions are one size larger, and the presence has increased even more! The front attenuator also has separate MID/TW, making it easy to control. The sense of range and overall sound connection are also excellent, and the sense of volume in the low frequencies is amazing, with only a double woofer. Serial 10136/10186 (Fujisawa Yukishi)
Maintenance information: 2024.4.6 maintained (exterior repair/polishing/oil finish, front and rear baffle/hakama repair/paint, saran net replacement/frame repair, woofer maintenance: edge replacement, cone paper coating, mid-cone paper coating, driver maintenance: magnetic circuit gap cleaning/center adjustment, sound absorbing material replacement, terminal cleaning/screw replacement, tweeter maintenance: magnetic circuit gap cleaning, sound absorbing material Reupholstery, terminal cleaning/screw replacement, network maintenance: frequency characteristic check, ATT disassembly and cleaning, terminal cleaning/screw replacement, unit detaching/diffuser repair)
Accessories: saran net, diffuser, channel divider 5235
Main specifications: used unit woofer 2235H, midbass 2202H, driver 2241, tweeter 2405H frequency characteristics 31.5 Hz to 18 kHz efficiency 96 dB impedance 290 Hz is 4 ohms, 290 Hz or more is 8 ohms, W1223 x H901 x D510 mm 120 kg
The price has been drastically reduced. 2024/4/14 sale price 1,450,000 yen Mark Levinson dual mono preamp No. 526! This is an ESS 32-bit D/A converter compatible with 192 kHz/32 bits. Also, it is equipped with plenty of digital inputs such as 2 coaxial, 2 optical, AES/EBU, and USB, and reproduces compressed digital sources with high fidelity. It is impressive that it has a more glossy SN feel than No. 326S. The exterior has a scratch on the upper front corner, and a small scratch on the back of the remote control about the size of a pinky finger nail (Sasaki Shota)
Maintenance information: 2024.4.13 operation confirmed
Accessories: remote control, manual, power cable, screwdriver, original box
Main specifications: analog input terminals/XLR balance x 2 pairs, RCA unbalance x 3 pairs, phono input x 1 pair, digital input terminal/XLR balance x 1 pair, RCA coaxial x 2, optical (Toslink) x 1, USB-B (asynchronous) x 1 output terminal/XLR balance x 1 pair, RCA unbalance x 1 pair, headphones (6.3 mm phono) x 1 W438 x H102 x D457 mm 18.6 kg
Refreshed during interior and exterior maintenance in July 2022! It is an S8R composed of late stage famous units representing JBL. The 075 tweeter is full of realism, with the sound of a driver blowing fire into the thick, dry low frequencies, and a sense of realism that leaves graininess. You can enjoy the real thrill of vintage audio. It is in good condition (Oikawa Tetsuji)
Maintenance information: 2022.7.13 maintained (exterior repair/polishing/oil finish, front and rear baffle/hakama repair/paint, lattice repair/polishing/painting, backing fabric replacement, woofer maintenance (edge replacement, cone paper coating), passive cone paper coating, driver maintenance (magnetic circuit rust removal/gap cleaning/center adjustment, sound absorbing material replacement, terminal cleaning), tweeter maintenance (horn polishing, magnetic circuit rust removal, etc.) Gap cleaning, terminal cleaning), network maintenance LX5 (terminal rust removal, acid washing, insulation bush & mounting screw replacement. ATT (SW type) disassembly contact polishing and cleaning. A frequency characteristic measurement check (~ 42 kHz) was performed, and the original capacitor was continuously used because the results were good. Input/output waveform and balance check, sound output check) N7000 (terminal and screw rust removal, acid cleaning, insulation bush replacement. ATT contact cleaning and contact grease application. A frequency characteristic measurement check (~ 42 kHz) was performed, and the original capacitor was continuously used because the results were good. input/output waveform and balance check, sound output check), unit detachable diffuser repair)
Accessories: none
Main specifications: 3 way 3 speakers 1 passive radiator system low range unit 38cm cone type LE15A, medium range unit horn type 375, high range unit 075, passive radiator 38cm cone type PR15, network LX5/N7000 sound pressure level 95dB allowable input 125W W1020 x H670 x D510 mm 82 kg/book
Full maintenance from the unit, network, and exterior! A floor-type speaker full of furniture that uses plenty of walnut wood. A powerful Alnico magnet is used for the 38cm unit, and the synergistic effect with the cabinet makes the mid-high range fresh and dynamic sound. It is also attractive that the connection up to the high range is smooth (Kobayashi Hitoshi)
Maintenance information: 2024.4.17 Maintained (exterior repair/polishing/oil finish, saran net replacement, unit maintenance: low range side: edge replacement, magnetic circuit gap cleaning/center adjustment, high range side: magnetic circuit gap cleaning/center adjustment. Network maintenance: frequency characteristic check, ATT contact cleaning, terminal cleaning)
Accessories: saran net, key
Main specifications: 15 inch coaxial 2-way 3889 (AlcomaXLLL) efficiency 93 dB allowable input 150 W continuous input impedance 8 ohms frequency characteristics/28 Hz to 22 kHz internal volume 235 liters W705 x H1,110 x D480 mm 68 kg
Full maintenance, from replacing deteriorated parts to re-caulking each jack and socket! The original Model 7 has arrived. You can enjoy a glossy mid to high range sound with a high sense of transparency and a thick, exquisite balance. It's a model that has been over half a century since it went on sale for analog fans, but it's still one they admire. The lustrous, indescribable tone is an appeal that cannot be enjoyed on modern devices. There is a feeling of use due to appearance, dullness, small scratches, etc. Serial No. 21199 (Kobayashi Hitoshi)
Maintenance information: 2024.4.17 maintenance completed (balance volume slide, front lamp replacement, high pressure selenium diode addition, RCA jack and vacuum tube socket re-caulking repair. AC 100 to 117 V operation checked) 2022.7.15 maintenance (V5 socket pin replacement, operation check) 2022.2.11 maintenance (main volume and balance volume disassembly cleaning repair, subchassis rubber pad replacement, vacuum tube 12AX7 replacement/vacuum tube socket and RCA jack re-caulking repair. Operation check with AC 100 to 117 V) 2019.3.20 maintained (main volume replacement, balance volume disassembly, cleaning repair, low pressure selenium replacement, high pressure selenium diode addition, block capacitor 50 μF, electrolytic capacitor addition/replacement, oil capacitor 0.01 μF, etc. replacement, front lamp original replacement, input ground reinforcement repair, vacuum tube socket and RCA jack caulking repair, operation check)
Accessories: copy of instruction manual
Main specifications: tubular control amplifier, vacuum tube, ECC83/12AX7, 3-stage NF equalizer, NF type step switching control, W453 x H185 x D267 mm, weight 7.5 kg
Maintained in 2023! Hammer tone BBC specification! Strobe platter included! This is a combination of GARRARD 301 and SME 3009S2, which has an attractive gripping, and gutsy sound. The high sensitivity short arm with high utility and the sound produced from the idler turntable is exhilarating and very comfortable. It is a record player system that allows you to experience the true essence of analog. Since the shaft on the back of the motor is long, an Audio-Technica insulator is included. *Currently, the pulley has a 60 Hz specification, but the strobe platter is for 50 Hz (Murakoshi Yoichi)
Maintenance information: 2023.8.15 maintenance (motor disassembly/check, lubrication, assembly. Main bearing disassembly, cleaning, oil injection, oil sealant application, assembly. Overall cleaning. idler cleaning Motor suspension spring rubber replacement. Transport plate fixing clip. Linguage distortion correction. Noise suppressor rebuild replacement. Mount rubber washer added. 50Hz pulley adjustment added. SME3009S2 cleaning. Mount grommet replacement Contact cleaning. (Running test)
Accessories: insulator (audio technica AT616)
Main specifications: 301: idler drive 33, 45, 78 rotations compatible 3009S2: short arm static balance type, total length 265 mm, overhang 15 mm, needle pressure (when 1 rider weight is attached) 1 memory 0.25 g step 0 g to maximum 2.5 g (when 2 rider weights are attached) 1 memory 0.5 step 0 g to maximum 5 g cartridge dead weight up to 28 g size W480 x D406 x H238 mm weight 12.5 kg
All units have been overhauled, including the woofer, mid, driver and tweeter, and network! It is an individual that has been fully restored, including the exterior. The original 4343 by All Alnico, the original 4343 of 4343! The crisp low frequencies and punchy high frequencies are unbearable, and popularity continues unabated even now. The dynamic sound typical of JBL has been revived due to maintenance. It is a famous monitor that can best reproduce the sound source of on-microphone recordings regardless of age or genre (Sasaki Shota)
Maintenance information: 2024.4.4 Maintained (exterior repair/gray paint. Front and rear baffle repair and painting. Saran net replacement/frame repair. Woofer maintenance: edge replacement, corn paper coating. Midmaintenance: edge replacement, corn paper coating. Driver maintenance: magnetic circuit rust removal/gap cleaning/center adjustment, sound absorbing material replacement, terminal cleaning/screw replacement. Tweeter maintenance: magnetic circuit rust removal/gap cleaning, terminal cleaning/screw replacement. Network maintenance: frequency characteristic check, ATT cleaning, terminal cleaning/screw replacement, switching SW contact cleaning, high frequency capacitor replacement)
Accessories: none
Main specifications: 4 way 4 speaker bass reflex type 2405/2420/2121/2231A crossover 300Hz/1250Hz/9500Hz 8Ω 93dB W635 x H1,051 x D435 mm 83.9 kg/book
It took plenty of time and money to finish everything from overhauling each unit to reupholstering the saran net to full exterior maintenance. This is a 4343BWX with blue baffles and walnut specifications. The instantaneous power, sharp treble, volume and dynamism of the bass are outstanding. It's one step ahead of current speakers in terms of localization, but it's rare to find a speaker that makes on-mic recordings of all ages sound better than this. Serial 16119, 16349 (Fujisawa Yukishi)
Maintenance information: 2024.4.5 maintained (exterior repair/polishing/oil finish, front and rear baffle repair/painting, saran net reupholstery, frame repair, woofer maintenance: edge replacement, cone paper coating, midmaintenance: driver maintenance: magnetic circuit rust removal/in-gap cleaning/center adjustment, sound absorbing material replacement, terminal cleaning/screw replacement, tweeter maintenance: magnetic circuit rust removal/in-gap cleaning, terminal Cleaning screw replacement, network maintenance: frequency characteristic check, ATT disassembly cleaning, switching SW contact cleaning, terminal cleaning/screw replacement, unit detachable diffuser repair)
Accessories: saran net, diffuser
Main specifications: 4-way monitor speaker bass reflex playback frequency band 35 Hz to 20 kHz (+- 3 dB) crossover frequency 300 Hz/1250 Hz/9500 Hz impedance 8 Ω output sound pressure level 93 dB dimensions W635 x H1,051 x D435 mm weight 83.9 kg/book
The price has been reduced! 2023/4/16 sales price 668,000 yen pure A grade stereo power amplifier. Precise sound particles overlap over and over to create a thick sound. It is an amplifier where you can catch a glimpse of the essence of Accuphase, which is close to the core of music by thoroughly refining physical characteristics. Not only is the sense of power and powerful bass, but the contoured, stretchy mid-to-high range is still appealing. There are scratches and scratches on the exterior. Serial F4Y151 (Fujisawa Yukishi)
Maintenance information: 2024.4.16 Operation confirmed
Accessories: instruction manual, power cord (general purpose)
Main specifications: A grade 60W+60W (8 ohms) dimensions W465 x H238 x D545 mm weight 45.1 kg
Refreshed and maintained with attention to detail, such as replacing deteriorated parts! It's a beautiful item with a wooden case! An original C22, a famous machine admired by enthusiasts. The thick, soft, and strongly extruded tone is a pleasant tone that can only be experienced with an old McKinn. It has a rich tone centered around the middle range with a high concentration, and it sounds with plenty of realism. The wood case is made with a pan lock for replicas. Serial 53A03 (Murakoshi Yoichi)
Maintenance information: 2024.4.17 maintenance (front lamp wiring re-soldering procedure, AC cord, 1W and 1/2W replacement, TREBLE switching noise reduction measures → 1/4 W resistance added, RCA jack and vacuum tube socket re-caulking repair. Operation check with AC 100 to 117 V) 2016.2.5 maintenance completed (main volume disassembly and cleaning repair, EL.c40μf, EL.c100μf replacement, 2 additional diodes, RCA jack and VT socket caulking repair, parts check including Block.C OIL.C)
Accessories: none
Main specifications: 117 V specification, 4 input systems, 2 phono systems, frequency characteristics, 20 Hz to 20 kHz (± 0.5 dB), signal-to-noise ratio, 85 dB (high level), 62.5 dB (low level), distortion ratio 0.2%, W406 x H138 x D330 mm, 7.3 kg
The disposal price has been reduced. 2024/4/4 sales price 898,000 yen British original enclosure, equipped with 15 inch monitor gold! Refreshing York has regained its original tone through our refreshment maintenance. It is a speaker representing TANNOY that brings out the appeal of all kinds of sources. In particular, the beautiful, glossy sound in string and vocal music plays a sound that once you hear it, you won't be able to leave your ears (Sasaki Shota)
Maintenance information: 2024.4.4 Maintained (exterior repair/polishing/clear finish. Maintenance: net cleaning/fraying repair/repasting, sound-absorbing material removal. Unit maintenance: Magnetic circuit gap cleaning center adjustment for both low and high frequencies. Network maintenance: frequency characteristic check, ATT cleaning, terminal cleaning)
Accessories: none
Main specifications: bass reflex system floor type 15 inch coaxial 2 way (Monitor Gold 15 inch) frequency characteristics 30 Hz to 20,000 Hz crossover frequency 1,000 Hz maximum input 50 W impedance 8 ohms size W597 x H1,070 x D375 mm
The price has been reduced! 2024/4/14 sales price 548,000 yen Manufacturer maintained! Equipped with an evolved VRDS-NEO (VMK-3.5-10). A 32-bit monaural DA converter with 4 circuits achieves overwhelming resolution and signal-to-noise ratio. It accurately reproduces not only detailed sound sources, but also very powerful sounds. Serial 30008 (Fujisawa Yukishi)
Maintenance information: 2024.2.27 manufacturer maintained (mechanical ASSY disassembled. cleaning. Lubrication clamper mechanism partial dismantling. Tweaks and corrections have been implemented. (Each part is cleaned, inspected, and adjusted)
Accessories: remote control, instruction manual, power cord
Main specifications: Playable disc/super audio CD, CD (CD-R/CD-RW compatible) output terminal 1 RCA/XLR output impedance RCA/47Ω XLR/100Ω frequency characteristics 5 Hz to 55,000 Hz S/N ratio 115 dB digital input RCA terminal/optical digital terminal/USB-B terminal 1 system each power consumption 27W W445 x H162 x D438 mm 28 kg
The deteriorated vacuum tubes etc. were replaced in 2023 and full maintenance has been completed! The vintage MC30 is still loved today, half a century later. The sharp high range and thick low to mid range sound are nothing short of wonderful. Since the left and right sides come out clearly without interference, you can feel a better sense of localization than a stereo machine. The good separation unique to mono amplifiers stands out, and it can play everything from jazz to classical music well (Murakoshi Yoichi)
Maintenance information: 2023.6.10 maintained (vacuum tube socket re-caulking repair, vacuum tube 12AX7 replacement, selenium countermeasure diode addition, 2W and 1/2W resistor replacement, HUM ADJ. readjustment/RCA jack re-caulking repair, operation check (measured at 25-38W SP:8Ω with rated output AC100-117 V).)
2012.6.12 Maintained (Capacitor Exchange/Mallory x 2, Sprag x 2, Europe x 2, Black Beauty x 10, Cornell x 2, Vacuum Tube, Partially Replaced with Good, Used, Silicon Rectifier, Vacuum Tube Pin, Rust Polishing and Socket Electrode Sack, Bolum, Sliding Surface Cleaning, RCA Pin Jack Cleaning, Each Voltage, Operation Inspection)
Accessories: none
Main specifications: rated output 30W, input sensitivity 0.5V vacuum tubes 6L6GC x 2, 5U4 x 1, 12AX7 x 2, 12BH7 x 1, 12AU7 x 1, W356 x H203 x D203 mm, weight 15.8 kg
Maintained! Comes with stand (DK-8000). A model that has improved the network box of the Diaton 50th anniversary model DS-8000. I am overwhelmed by the clear, detailed treble from Pure Boron and the thick mid-low range compared to the 2S-305 broadcast monitor. Also, the quick start-up sound, which is unimaginable from its size, is excellent. There is a feeling of use in appearance, dullness, light scuffs, etc. (Kobayashi Hitoshi)
Maintenance information: 2022.10.21 maintained (exterior stand network exterior cleaning/large scratch filler repair/line scratch simple touch up (repair marks remain) saran net stain/frame cleaning mid-edge softening treatment unit detachable one-sided tweeter disassembly and disconnection repair)
Accessories: saran net
Main specifications: 3 way, 3 speakers, bass reflex system, floor type, anti-magnetic type, 5 ohm 35 Hz to 40,000 Hz 93 db/w/m main unit W500 x H870 x D442 mm network box W370 x H130 x D287 mm weight body 58 kg, network 8 kg
A late model of the C20 that underwent full maintenance from the 2023/12 condenser to the main VOL replacement. Among Mackin's control amplifiers, this is a popular gem with a particularly rich, glossy tone. Not only jazz, but also the vocal sounds are excellent. The unique, rich, and highly artistic tone shows a particularly good compatibility with vintage speakers. Exterior, front panel characters disappear a lot, dullness, small scratches, abrasions, etc., and there is a feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.4.2 maintenance completed (1/2 W resistor replacement and 3 noise countermeasures replaced) 2023.12.19 maintenance (vacuum tube 6X4, block capacitor, electrolytic capacitor, film capacitor, oil capacitor, resistor, main volume replacement. Gang error correction resistance 1/2 W added, switching noise reduction resistance 1/4 W added. RCA jack and vacuum tube socket caulk repair, operation check.)
Accessories: none
Main specifications: tubular phono 2 system phono equalizer curve variable use vacuum tube ECC83 x 5 ECC82 x 2 EZ90 x 1 W440 x H165 x D316 mm 8.7 kg
The price has been reduced! 2024/3/31 sales price 448,000 yen Maintained! It's a famous machine you can't miss when talking about Marantz sounds of yesteryear. It has a good mid-range fat transfer, and its pleasant tonal feel is an appeal that cannot be obtained anywhere else. You can enjoy the Marantz sounds of the good times. ※The hood is not included. Paint deterioration and rust can be seen on the exterior. Serial 8-6421 (Fujisawa Yukishi)
Maintenance information: 2024.3.31 Maintained (BIAS switching noise reduction measures → strengthened contact points for each disassembly part and cleaning and repair. Electrolytic capacitor 20 μF x 2 deterioration replacement. Replace 2 25 μF electrolytic capacitors due to deterioration. Block capacitor 60 μF deterioration replacement. BIAS/AC BAL. RECONDITIONED Vacuum tube socket and RCA jack caulking repair*Other operation checks have been performed (measured at 32 to 45 W SP: 8 Ω with rated output AC 100 to 117 V)
Accessories: No accessories
Main specifications: 35W+35W vacuum tube 6CG7/6BH6/EL34 W348 × H191 × D273mm 22.5 kg
The price has been drastically reduced. 2024/4/10 sales price 450,000 yen The output tube has been replaced with a GE 6550! Genuine Electri A stainless steel chassis version of the 2nd generation reprinted model. It is a model that stands out for its good SNR feel and improved fine particle feel, etc., and its depth of pocket that is compatible with the latest sources is attractive. The heavy, vintage look is also wonderful. The hood is missing, there are many transformer paint peeling repair marks on the exterior, and the letters on the back have disappeared. Serial E10122 (Murakoshi Yoichi)
Maintenance information: 2017.10.18 Maintained (SW/VR disassembly contacts repolished, oxidized/vulcanized grease coated. Replace all 9P socket pins Voltage check for each part, check input/output waveforms, load test (at 1kHz, 8Ω load: 75W x 2) sound output test)
Accessories: instruction manual (copy)
Main specifications: 6550 push-pull input 2 systems (XLR/RCA) rated output 75W+75W (4/8/16Ω) mono 150W (2/4/8Ω) W406 x H190 x D305 mm 30.5 kg
Maintained! The flagship model of the Macintosh power amplifier with a silver panel. It is characterized by its rich sound. The extrusion is strong and goes great with JBL large monitor speakers. The dynamism in the mid to low range, which is difficult to obtain with current Mackin power amplifiers, is attractive. There are scratches, dullness, and discoloration in places (Kojima Yosuke)
Maintenance information: 2024.4.18 Maintained (1 power transistor, 1 driver transistor replaced, other bias transistors replaced, 14 in-board transistors replaced, 26 capacitors replaced, gain VOL both channels replaced. Mode switch SW dismantling and cleaning, meter lamp check, display lamp replacement. Caulk and clean each connector. (Pattern re-soldered, DC offset, bias adjusted)
Accessories: power cable
Main specifications: 500W+500W (1000W when mono) equipped with power guard circuit W483 x D465 x H263 mm 60.3 kg
※It has a cigarette smell, so it's cheap. This is Series 2 with dual outputs. It is a famous machine that achieves both a mild and highly textured mid to high range while having an unquestionably high amount of information. The high level of musicality that never becomes stiff due to its moderate temperature is also attractive. The exterior has scratches, stroke marks, and dullness. Serial R1256, S1256 (Fujisawa Yukishi)
Maintenance information: 2024.4.13 operation confirmed
Accessories: remote control, power cord, connection cord, brand new solbutton
Main specifications: full balance circuit input: XLR x 5/bypass XLR x 1 preamp part: W445 x H80 x D152.5 mm 11 kg power supply part: W445 x H38 x D122 mm 3 kg
The disposal price has been reduced! (Member prices are not applicable) 2024/2/16 sales price 448,000 yen Maintained in 2022/7! Comes with a hood! This is a famous gem that has both thickness and sex appeal while making a quick sound. There is no boomy sound, which is a drawback of vacuum tube amplifiers, and it is a vintage sound that is still popular today due to its good tone and good balance. The exterior has stains, stains, paint peeling, etc. Serial 2417 (Tomoho Asaine)
Maintenance information: 2022.7.13 Maintained (replacement of 2 vacuum tubes 6CA7 deteriorated, 2 electrolytic capacitors → block capacitors replaced with 47 μF x 2, resistance 1W domestically produced → replaced with USA-made, bottom leg deterioration replacement/vacuum tube socket and RCA jack re-caulking repair. *Other operation checks have been performed (measured at 32 to 43 W SP: 8 Ω at rated output AC 100 to 117 V)
2021.3.28 Maintained (vacuum tube socket partially loosened, re-caulking repair, other RCA jack re-caulking repairs and AC BAL. /DC BAL. /BIAS realignment implemented. Rated output AC 100 to 117 V measured at 32 to 41 W SP: 8 Ω) Maintained on 2015.1.23 (2 VT6BH6 noisy replacements · block.c40/20/20 μf deterioration exchange and external coating · R1/2W 100Ω combustion exchange · Fuse3A Slowblow ⇒ 2.5A SlowBlow replacement with original · EL.C10μF ⇒ 20 μF original replacement 2 pieces ※ other parts check ( EL.c has been added to Block.c2 by another company. Other EL.C has been replaced by another company))
Accessories: none
Main specifications: vacuum tube EL34, 6CG7 x 2, 6BH6 x 2 output 35W+35W W346 x H192 x D250 mm 21.9 kg
Maintained! A powerful player that combines a sturdy, heavyweight aluminum turntable with a high-performance tonearm FR-64S. It is an attractive gem with very convincing sound quality. There is a feeling of wear on the exterior, such as scratches and dullness. Serial 02040801 (Jun Tamai)
Maintenance information: 2024.4.6 maintenance details (drive motor disassembly and shaft replacement, platter bearing disassembly and lubrication arm lifter disassembly cleaning, grease up tone arm disassembly, cleaning, bearing replacement, electrolytic capacitor replacement, OP amplifier replacement, rotation fine adjustment, volume replacement, turntable rotation speed confirmation, arm operation confirmation, external cleaning, sound test, other operation confirmation)
Accessories: copy of instruction manual
Main specifications: player W532 x H215 x D420 mm weight 18 kg total length 325 mm effective length 245 mm overhang 15 mm needle pressure application range 0 to 5 g arm height adjustment 25 to 60 mm compatible cartridge weight (including shell) 17 to 44 g tracking error +2.25° to -1.35° (inner circumference 0) mounting hole diameter 31 φmm
The price has been drastically reduced! 2024/4/5 sales price 398,000 yen ※Saran net is out of stock. Network maintenance was applied to the tweeter, and an oil finish was applied to exterior maintenance to give it a clean refresh! This model is a rare combination with the 075. A floor-type speaker system that can be grounded vertically or horizontally according to room preferences. It features a well-balanced sound style that you won't get tired of, and the enclosure has plenty of capacity, so you can feel the power of the bass and the depth of the sound. There are repair marks on the exterior. Serial 10927, 10938 (Fujisawa Yukishi)
Maintenance information: 2024.4.5 maintained (tweeter maintenance: horn polishing, magnetic circuit gap cleaning, terminal cleaning/screw replacement, network maintenance: frequency characteristic check, ATT cleaning, terminal cleaning/screw replacement, exterior repair/polishing/oil finish, front and rear baffle repair/painting)
Accessories: No accessories
Main specifications: D130/075/N2400, 8 ohms, allowable input, 60 W, crossover frequency, 2.5 kHz, measured size W550 x H750 x D390 mm, 46.7 kg
Maintained! 100V specification genuine Baes product. A power amplifier representing the golden age of McKinn. It has a rich, gorgeous sound with a punch, and is still a popular model. Although it is a transistor amplifier, it is an amplifier that still has a strong tubular atmosphere. The rich, thick characters reproduce the music on a rich scale. Rust can be seen on the main body. Serial JCT2411 (Fujisawa Yukishi)
Maintenance information: 2024.4.8 Maintained (meter and display lamp replacement (there is slight unevenness in characters due to deterioration of the light guide plate, but this is the current situation) Electrolytic capacitor, rotary SW replacement. Apply heat-resistant tape. Solder correction. Clean card edge contacts, switches, and volumes. Possible panel peeling correction. Bias and offset checks. Output audio check)
Accessories: No accessories
Main specifications: 250W+250W (stereo 1/2/4/8Ω) 500W (mono 0.5/1/2/4/8/16Ω) input sensitivity (0.75V/2.5V) switchable W411 x H181 x D368 mm 37.2kg
Maintained! 100V specification genuine Baes product. A power amplifier representing the golden age of McKinn. It has a rich, gorgeous sound with a punch, and is still a popular model. Although it is a transistor amplifier, it is an amplifier that still has a strong tubular atmosphere. The rich, thick characters reproduce the music on a rich scale. Rust can be seen on the main body. Serial JCT1245 (Fujisawa Yukishi)
Maintenance Information: 2024.4.8 Maintained (Electrolytic Capacitor Replaced. Replace the meter and display lamp. Apply heat-resistant tape Urethane sheet deterioration replacement. Clean switches and volumes. Card edge contact cleaning. Solder correction. Bias and offset checks. Output audio check)
Accessories: No accessories
Main specifications: 250W+250W (stereo 1/2/4/8Ω) 500W (mono 0.5/1/2/4/8/16Ω) input sensitivity (0.75V/2.5V) switchable W411 x H181 x D368 mm 37.2kg
The price has been drastically reduced! 2024/4/13 sales price 348,000 yen ※ It is cheap because it is in poor condition such as deposits, scratches, tobacco smell, etc. A power amplifier that enables overwhelming spatial expression with a second-generation ultra-high speed switching power supply. First of all, I was surprised by the smooth, cored sound. The driving power is also excellent, and it has the ability to easily drive high-class speakers. The exterior is dull all over, and there are abrasions on the top plate and front (Yonejima Satoshi)
Maintenance information: 2024.4.13 operation confirmed
Accessories: connection cord, power cable
Main specifications: 150W+150W (8Ω) input/unbalance (RCA) 1 system/balanced (XLR) 1 system SP terminal/1 system main unit W445 x H97 x D335 mm power supply unit W445 x H97 x D319 mm body 13.5 kg power supply 13.7 kg
The original appeal of Arden, where a simple and beautiful design and deep sound coexist, has been revived due to full internal and external maintenance utilizing the original capacitors. This is the second generation of Tannoy's famous machine ARDEN. The warm and soft tone is attractive. It plays all kinds of music lusciously and gently. The sense of scale of the orchestra and the smooth playback of stringed instruments are satisfying enough to listen to. There are repair marks on the edge of the cone paper on one side and the top surface on one side. The exterior has been beautifully finished due to exterior maintenance. Serial 0016190/0005927 (Murakoshi Yoichi)
Maintenance information: 2024.4.3 maintenance (exterior repair) 2022.5.30 maintained (output terminal contact cleaning. Chassis screw replacement. Internal connection terminal (faston) replaced with a new one. ATT (SW type) contact cleaning. A frequency characteristic measurement check (~ 42 kHz) was performed, and the original capacitor was continuously used because the results were good. Check the input/output waveform and balance, and check the sound output. Unit maintenance (low range side: edge replacement, magnetic circuit rust removal/gap cleaning/center adjustment, high range side: magnetic circuit rust removal/gap cleaning/center adjustment. Exterior repair/polishing/oil finish Front and rear baffles/hakama repair/painting Saran net replacement. (Detachable unit)
Accessories: saran net
Main specifications: 2 way, 1 speaker, bass reflex system, floor type specification unit 3828, crossover frequency, 1 kHz, output sound pressure level, 91.5 dB, 8 ohms, dimensions W660 x H990 x D370 mm, weight 43 kg/book
Internally and externally maintained! This is the second generation of Tannoy's famous machine ARDEN. The warm and soft tone is attractive. It plays all kinds of music lusciously and gently. In particular, it works great with vacuum tube amplifiers, and the sense of orchestra scale and smooth playback of stringed instruments are satisfying enough to listen to. The exterior has been beautifully finished due to exterior maintenance. Serial 011093 016017 (Tomonori Asaine)
Maintenance information: 2024.4.18 Maintained (exterior repair/polishing/oil finish front and rear baffle/hakama repair/paint saran frame reinforcement painting/net replacement, batch polishing unit maintenance (high frequency magnetic circuit/in-gap cleaning/center adjustment diaphragm gap indirect attachment) ATT cleaning unit detachable)
Accessories: saran net
Main specifications: 2 way, 1 speaker, bass reflex system, floor type specification unit 3828, crossover frequency, 1 kHz, output sound pressure level, 91.5 dB, 8 ohms, dimensions W660 x H990 x D370 mm, weight 43 kg/book
Full internal and external maintenance completed in 2022! This is the second generation of Tannoy's famous machine ARDEN. The warm and soft tone is attractive. It plays all kinds of music lusciously and gently. In particular, it works great with vacuum tube amplifiers, and the sense of orchestra scale and smooth playback of stringed instruments are satisfying enough to listen to. The exterior has some impact scratches and board repair marks on one side of the hakama part. Serial 003354/003047 (Fujisawa Yukishi)
Maintenance information: 2022.9.23 Maintained (terminal screws, rust removal, acid washing, cleaning. Internal connection terminal (faston) replaced with a new one. ATT (SW type) contact cleaning. A frequency characteristic measurement check (~ 42 kHz) was performed, and the original capacitor was continuously used because the results were good. Check the input/output waveform and balance, and check the sound output. Unit maintenance (high range side: magnetic circuit gap cleaning/center adjustment) exterior repair/polishing/oil finish. Front and rear baffles/hakama repair/painting Saran net replacement)
Accessories: saran net
Main specifications: 2 way, 1 speaker, bass reflex system, floor type specification unit 3828, crossover frequency, 1 kHz, output sound pressure level, 91.5 dB, 8 ohms, dimensions W660 x H990 x D370 mm, weight 43 kg/book
The disposal price has been reduced. 2024/3/31 sales price 378,000 yen equipped with a long arm RMG309i for SPU-G shells! The dust cover will be replaced with a new one in 2022. You can enjoy the fluffy feeling unique to Torrens belt drives, and the afterglow of the sound fading away. You can enjoy the rich sound of the SPU, which is firmly scraped out from the depths of the sound groove. The phono cable is made by Canale, and the manufacturer of the armrest is unknown. As for the exterior, there is a slight feeling of use, dullness, etc. on the arms and armrests. Serial 12396 (Murakoshi Yoichi)
Maintenance information: 2022.2.13 maintenance (new dust cover created)
Main specifications: TD-521 belt drive floating system compatible with 33/45/78 main body W550 x H180 x D410 mm 15 kg RMG309 dynamic balance type needle pressure 0 to 7 g total length 408 mm effective length 320 mm overhang 11 mm
The disposal price has been reduced! (Member discounts are not applicable) 2024/3/7 sales price 398,000 yen Exterior maintenance completed! Replace network capacitors with SOLEN film capacitors. The unit is DENTECH Tune HDP385, and the enclosure is made by Shinkosha. The unit is attached by removing the back plate, and the net does not come off the front. Classical music also goes well with symphonies. The exterior is generally beautifully finished due to maintenance. Serial AYT71012 AYT71012 (Tomonori Asaine)
Maintenance information: 2024.3.7 Maintained (exterior repair/cleaning)
Rear baffle paint saran net replacement unit maintenance (exterior cleaning, low range center adjustment, screw tightening, high frequency magnetic circuit slit cleaning/center adjustment) ATT cleaning/knob adjustment unit detachment)
2015.5.14 Maintained (network capacitors replaced with SOLEN. Unit edge replacement. Magnetic circuit overhaul and operation adjustment. Saran net partial cleaning net tear repair, complementary color correction)
Accessories: none
Main specifications: used unit HPD385 frequency characteristics 20Hz to 20kHz allowable input 85W 92dB 8Ω W600 x H1075 x D380 mm approx. 42 kg/bottle
Internal and external maintenance has been applied and brushed up. The vivid sense of dynamism and the sharpness of the high frequencies typical of YAMAHA have been revived. It has a low frequency thickness that 1000 monitors don't have. It is a timeless masterpiece with a clear sense of transparency, upper and lower driving force, and the smooth connection, and the heavy exterior with an ebony finish that stands out at a glance even today. It is in good condition due to maintenance. Serial 11478L 11478R (Yamato Yuki)
Maintenance information: 2024.4.1 operation confirmed
2023.9.4 Maintained (exterior repair/polishing/clear finish. Rear baffle repair/painting. Saran net replacement. Unit frame painting. Network maintenance (Since the terminals have already been replaced with external products, adjust the direction and tighten, apply a screw fastener, and replace the mounting screws. ATT contact status check (check that there are no gaps). A frequency characteristic measurement check (~ 42 kHz) was performed, and the original capacitor was continuously used because the results were good. Input/output waveform and balance check, sound output check) Unit detachable)
Accessories: saran net
Main specifications: 3-way sealed playback frequency band 40Hz to 20kH sound pressure level 90dB rated input 50W maximum allowable input 100W impedance 8Ω crossover frequency 500Hz/6kHz dimensions W395 x H710 x D349 mm 39 kg
The disposal price has been reduced. Member discounts are not applicable. 2024/4/9 sales price 348,000 yen manufacturer maintenance completed! It is a transparent SACD player with a delicate sound. This model has a reputation for its high degree of perfection using a Sony drive. The thickness of the sound. The high level of musicality shines through the excellent balance of each SPEC, such as the high instantaneous power and large sound field space. There are light stains on the exterior and front panel, and there is also dullness and a feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.4.9 Manufacturer maintained (resistor replacement/characteristic adjustment. Open and close belt open/close switch replacement. (Interior and exterior cleaning, operation/characteristic aging tests, insulation/safety tests completed)
Accessories: remote control, instruction manual, power cord, connection cord
Main specifications: output balance 1 system, unbalance 1 system dimensions W475 x H151 x D397 mm, weight 17.7 kg